WL-500gP with 3G USB Modem and Oleg's Firmware

[[Lamas]]

Hello,

I'm new in this land, but i want to question if someone nows if exist any firmware with CDMA to ASUS WL-500gP, and where I can find it.

Thanks,
JF

[Mektub]

Hello,

I'm new in this land, but i want to question if someone nows if exist any firmware with CDMA to ASUS WL-500gP, and where I can find it.

Thanks,
JF

Hi, I am using the ASUS WL-500gP ith the firmware I found at this site:

http://koppel.cz/cdmawifi/download/162/

and it works perfectly with my CDMA USB modem.

The firmware is in english, but since the site is in Check and I dont understand
this language it was kind of trial and error.

Bur so far so good.

Mektub

[calaba]

The firmware is in english, but since the site is in Check and I dont understand this language it was kind of trial and error.
Mektub

Check that this site is in "Czech"

[int]

WL500gp-1.9.2.7-7f-pre5-CDMA-1.62.trx work well for me too, but this firmware are secure? I don't want my wl-500gp dead..


And with the problem about the range of 500gP? my 500g have more that twice range that 500gP.

And in the box say it more that 300% range..

[int]

This cdma fw have some bugs that it need to be fixed

I can't use Dynamic DNS Say:

ddns update: could not resolve ip address for vlan1.

It seems easy to solve..

[int]

A new release with the last and final firmware of OLEG, and with the bugs I reported fixed.

http://koppel.cz/cdmawifi/download/163/

The changes 1.62 to 1.63:

1.63

* priprava uzivatelskych scriptu v /usr/local/sbin
* moznost zadani username/password/apn pro IP Wireless (T-Mobile 4G)
* podpora GPRS/EDGE/UMTS/HSDPA modemů Zadacom 2G a 3G+
* opravy spravy DNS v zalohovanem spojeni
* funkcni DDNS (dyndns) pro vytacena spojeni se zjistovanim skutecne vnejsi ip adresy
* Changes of OLEG:
* Switched to Busybox 1.1.3
* VT6212 USB 2.0 patch (10-15% speedup)
* USB sticks without MBR should be also now mounted
* Storage devices are using async options by default
* WL500g Premium support (MirrorBit Flash support, nvram validation, 32mb enabled) !!! The firmware is totally different from the stock one: no DM, different FTP server and Samba! Do not flash if in doubt - you would miss some features !!!
* Additional pppd options field is now 255 chars long
* PPP now defaults to unlimited number of connection attempts
* PPTP connections now use MTU 1400 by default
* DHCP+PPTP (0.0.0.0 gateway support in the MAN routes, DNS and default gateway options now could be acquired from DHCP too, symbolic PPTP name support, PPTP client now adds route to the server)
* Fixed MAN->LAN firewall issue (be sure to enable WAN to LAN filter and set default action to DROP!)
* Fixed some firewall defaults (WAN->LAN is now enabled and DROPs)
* "Apply to routing table" option is now in effect
* Default gateway is no longer appears in the nameserver list in the AP mode
* SIGALRM is no longer blocked in the post-mount
* Minor bugs...

[Piaf]

I have a Telemodem Z010. Could someone help me using it, somehow?

[rss]

I have a Telemodem Z010. Could someone help me using it, somehow?

https://code.google.com/p/wl500g/downloads/list
https://code.google.com/p/wl500g/wik...kDevices3GCDMA

[Morcegolas]

Hello, I want to buy a 3G USB Modem to have internet everywhere but when I am at home I have another computers and I want to share my connection without having one computer turned on to share the internet! I looked for intensively in the Internet and finnaly I found one router called Asus WL-500g deluxe with 2 Usb Ports that works with one ISP from Portugal called ZAPP, so my awnser is if this works with the Vodafone USB 3G Connection Box.

Here you have a photo of it.



Hope you can help me!
Thanks!

[drazvan]

Yes, the Asus WL500g Deluxe works with that dongle (I'm assuming you are talking about the Huawei E220 - a.k.a. Vodafone SmartModem). But it doesn't work out of the box, you need to load the usbserial module manually (or in /usr/local/sbin/post-boot) and configure the dialup settings. Other than that it works (don't expect HSDPA speeds though, that won't happen until someone recompiles the usbserial module for the WL500g with the extensions suggested at http://www.junxion.com/opensource/li...usbserial.html - there's another thread I opened on the subject earlier).

Razvan

[engy]

Try this http://koppel.cz/cdmawifi/download.

[drazvan]

That's the one I'm using and it doesn't help much. The USB Serial module is still the same slow one, they're using the acm module for the EVDO modems. I'm in Romania and we have a CDMA 450 EVDO network here so I was able to test. You still need to insert the module manually and you still get slow speeds.

[Arlindovsky]

last week i brought a asus wl-500g Premium.
I flashed with firmware h**p://koppel.cz/cdmawifi/download/163/WL500gp-1.9.2.7-7f-USB-1.63.trx
my usb modem Huawei e200, is recognized but can't establish a connection.
I need help, please!

[dimensionone]

Hi,

I have the same problem. Firmware from mentioned website is only for ZADACOM modems and will not support HUAWEI modems. I contacted people around the project, if there is a possibility to create firmware, that will support this modem, but had negative answer. They did not have that modem, it is quite expensive to get it. Without having the modem physically at their site, they cannot develop the firmware update.

Now, waiting for some developer, who will have the modem and will modify the firmware by loading appropriate usbserial modules, that will support HUAWEI modem.

[ct3fq]

Hi,
Please uninstall the zadacomm drivers with the rmmod command and execute insmod usbserial vendor=0x12d1 product=0x1003
Then use pppd and chat to make the connection.

Hope this helps..
Cheers