Page 9 of 9 FirstFirst ... 789
Results 121 to 123 of 123

Thread: [HowTo] Part One - WL-500g Premium

  1. #121
    Quote Originally Posted by zexe View Post
    I got this message: Unable to open /dev/discs/disc0/disc
    I get exactly the same message. This router is my first contact with linux... When I check what is mounted with "df", this is the result:

    PHP Code:
    [monivash@asus root]$ df
    Filesystem           1k
    -blocks      Used Available Use% Mounted on
    /dev/root                 3072      3072         0 100% / 
    So I try to mount my hdd:
    PHP Code:
    [monivash@asus root]$ mount /dev/discs/disc0/part0 /opt
    mount
    Mounting /dev/discs/disc0/part0 on /opt failedNo such file or directory 
    Results of "dmesg"
    PHP Code:
    CPU revision is: 00029006
    Primary instruction cache 16kblinesize 16 bytes (2 ways)
    Primary data cache 16kblinesize 16 bytes (2 ways)
    Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications#18 Sun Mar 30 13:13:29 MSD 2008
    Setting the PFC to its default value
    Determined physical RAM map
    :
     
    memory02000000 00000000 (usable)
    On node 0 totalpages8192
    zone
    (0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command lineroot=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200
    CPU
    BCM4704 rev 9 pkg 0 at 264 MHz
    Calibrating delay loop
    ... 263.78 BogoMIPS
    Memory
    30092k/32768k available (1862k kernel code2676k reserved136k data72k init0k highmem)
    Dentry cache hash table entries4096 (order332768 bytes)
    Inode cache hash table entries2048 (order216384 bytes)
    Mount-cache hash table entries512 (order04096 bytes)
    Buffer-cache hash table entries1024 (order04096 bytes)
    Page-cache hash table entries8192 (order332768 bytes)
    Checking for 'wait' instruction...  unavailable.
    POSIX conformance testing by UNIFIX
    PCI
    Initializing host
    PCI
    Fixing up bus 0
    PCI
    Fixing up bridge
    PCI
    Fixing up bus 1
    Linux NET4.0 
    for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    Journalled Block Device driver loaded
    devfs
    v1.12c (20020818Richard Gooch (rgooch@atnf.csiro.au)
    devfsboot_options0x1
    NTFS driver v1.1.22 
    [FlagsR/O]
    pty256 Unix98 ptys configured
    Serial driver version 5.05c 
    (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0xb8000300 
    (irq 3is a 16550A
    ttyS01 at 0xb8000400 
    (irq 3is a 16550A
    HDLC line discipline
    version $Revision$, maxframe=4096
    N_HDLC line discipline registered
    .
    looploaded (max 8 devices)
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    MPPE
    /MPPC encryption/compression module registered
    PPPoL2TP kernel driver
    V0.13 (oleg@cs.msu.su)
    Physically mapped flashFound an alias at 0x800000 for the chip at 0x0
    Physically mapped flash
    Found an alias at 0x1000000 for the chip at 0x0
    Physically mapped flash
    Found an alias at 0x1800000 for the chip at 0x0
     Amd
    /Fujitsu Extended Query Table v1.3 at 0x0040
     Flash Id
    Vendor0x0001 Device0x007e
    number of CFI chips
    1
    Flash device
    0x800000 at 0x1c000000
    Physically mapped flash
    squashfs filesystem found at block 912
    Creating 5 MTD partitions on 
    "Physically mapped flash":
    0x00000000-0x00040000 "boot"
    0x00040000-0x007f0000 "linux"
    0x000e4000-0x007f0000 "rootfs"
    0x007f0000-0x00800000 "nvram"
    0x003e0000-0x007f0000 "flashfs"
    sflashfound no supported devices
    NET4
    Linux TCP/IP 1.0 for NET4.0
    IP Protocols
    ICMPUDPTCPIGMP
    IP
    routing cache hash table of 512 buckets4Kbytes
    TCP
    Hash tables configured (established 2048 bind 4096)
    Linux IP multicast router 0.06 plus PIM-SM
    ip_conntrack version 2.1 
    (256 buckets2048 max) - 352 bytes per conntrack
    ip_conntrack_pptp version 1.9 loaded
    ip_nat_pptp version 1.5 loaded
    ip_tables
    : (C2000-2002 Netfilter core team
    ipt_time loading
    NET4
    Unix domain sockets 1.0/SMP for Linux NET4.0.
    IPv6 v0.8 for NET4.0
    IPv6 over IPv4 tunneling driver
    NET4
    Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.7 Ben Greear 
    <greearb@candelatech.com>
    All bugs added by David SMiller <davem@redhat.com>
    FATbogus logical sector size 59648
    FAT
    bogus logical sector size 59648
    NTFS
    Unable to set blocksize 512.
    VFS
    Mounted root (squashfs filesystemreadonly.
    Mounted devfs on /dev
    Freeing unused kernel memory
    72k freed
    Algorithmics
    /MIPS FPU Emulator v1.5
    eth0
    Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
    unregister_netdevice
    device eth1/8106cc00 never was registered
    PCI
    Enabling device 01:02.0 (0004 -> 0006)
    eth1Broadcom BCM4318 802.11 Wireless Controller 4.150.10.16
    vlan0
    add 33:33:00:00:00:01 mcast address to master interface
    vlan0add 33:33:ff:d6:9c:9c mcast address to master interface
    vlan0dev_set_promiscuity(master1)
    device eth0 entered promiscuous mode
    device vlan0 entered promiscuous mode
    device eth1 entered promiscuous mode
    br0
    port 2(eth1entering listening state
    br0
    port 1(vlan0entering listening state
    br0
    port 2(eth1entering learning state
    br0
    port 2(eth1entering forwarding state
    br0
    topology change detectedpropagating
    br0
    port 1(vlan0entering learning state
    br0
    port 1(vlan0entering forwarding state
    br0
    topology change detectedpropagating
    usb
    .cregistered new driver usbdevfs
    usb
    .cregistered new driver hub
    usb
    -uhci.c$Revision1.275 time 20:50:46 Mar 17 2008
    usb
    -uhci.cHigh bandwidth mode enabled
    PCI
    Enabling device 01:03.0 (0000 -> 0001)
    ECHI PCI device 30381106 found.
    UCHI reg 0x41 10
    UCHI reg 0x41 changed to 
    0
    usb
    -uhci.cUSB UHCI at I/O 0x100IRQ 12
    usb
    -uhci.cDetected 2 ports
    usb
    .c: new USB bus registeredassigned bus number 1
    hub
    .cUSB hub found
    hub
    .c2 ports detected
    PCI
    Enabling device 01:03.1 (0000 -> 0001)
    ECHI PCI device 30381106 found.
    UCHI reg 0x41 10
    UCHI reg 0x41 changed to 
    0
    usb
    -uhci.cUSB UHCI at I/O 0x120IRQ 12
    usb
    -uhci.cDetected 2 ports
    usb
    .c: new USB bus registeredassigned bus number 2
    hub
    .cUSB hub found
    hub
    .c2 ports detected
    usb
    -uhci.cv1.275:USB Universal Host Controller Interface driver
    PCI
    Enabling device 01:03.2 (0000 -> 0002)
    ehci_hcd 01:03.2PCI device 1106:3104
    ehci_hcd 01
    :03.2irq 12pci mem c0120000
    usb
    .c: new USB bus registeredassigned bus number 3
    ECHI PCI device 31041106 found
    .
    ECHI reg 0x49 80010f20
    ECHI reg 0x49 changed to 
    80010f00
    ECHI reg 0x4b 
    80010f09
    ECHI reg 0x4b changed to 
    80010f29
    PCI
    01:03.2 PCI cache line size set incorrectly (0 bytesby BIOS/FWcorrecting to 32
    ehci_hcd 01
    :03.2USB 2.0 enabledEHCI 1.00driver 2003-Dec-29/2.4
    hub
    .cUSB hub found
    hub
    .c4 ports detected
    usb
    .cregistered new driver usblp
    printer
    .cv0.13USB Printer Device Class driver
    usb
    .cregistered new driver audio
    audio
    .cv1.0.0:USB Audio Class driver
    Linux video capture 
    interface: v1.00
    SCSI subsystem driver Revision
    1.00
    Initializing USB Mass Storage driver
    ...
    usb.cregistered new driver usb-storage
    USB Mass Storage support registered
    .
    vlan1Setting MAC address to  00 17 31 d6 9c 9c.
    VLAN (vlan1):  Underlying device (eth0has same MACnot checking promiscious mode.
    vlan1add 33:33:00:00:00:01 mcast address to master interface
    vlan1add 33:33:ff:d6:9c:9c mcast address to master interface
    vlan1add 01:00:5e:00:00:01 mcast address to master interface 
    Who can help me out of here? I only want the hdd shared with Samba. I use Oleg's firmware, version 1.9.2.7-10.

  2. #122
    Try
    Code:
    mount /dev/discs/disc0/part1 /tmp/harddisk
    mount /dev/discs/disc1/part1 /tmp/harddisk
    mount /tmp/harddisk/opt /opt
    And watch for errors in syslog in Web UI

  3. #123

    Question Got a problem with free space on hdd

    Message of insufficient space on hdd.

    Router Asuswl500gp2, Oleg's firmware 1.9.2.7 - 10, hdd Seagate 2Tb with external power. The router settings are according to this tutorial: http://wl500g.info/showthread.php?t=10307

    I created a folder mkdir /tmp/harddisk/share, copied there about 100Gb and got a message for insufficient space on harddrive

    [admin@Wl500gp2 root]$ du s /tmp/harddisk/share
    104844952 /tmp/harddisk/share

    also mounted folder big, the problem is still there

    [admin@Wl500gp2 root]$ mkdir /tmp/mnt/disc0_3/big
    [admin@Wl500gp2 root]$ chmod ugoa+w /tmp/mnt/disc0_3/big

    there is plenty of free space on the drive:

    [admin@Wl500gp2 root]$ df
    Filesystem 1k-blocks Used Available Use% Mounted on
    /dev/root 3072 3072 0 100% /
    /dev/discs/disc0/part2 985720 65988 869660 7% /opt
    /dev/discs/disc0/part3 1921383312 104976180 1816407132 5% /tmp/mnt/disc0_3

    Filesystem is ext3

    [admin@Wl500gp2 root]$ mount
    /dev/root on / type squashfs (ro)
    none on /dev type devfs (rw)
    proc on /proc type proc (rw)
    ramfs on /tmp type ramfs (rw)
    usbfs on /proc/bus/usb type usbfs (rw)
    /dev/discs/disc0/part2 on /opt type ext3 (rw,noatime)
    /dev/discs/disc0/part3 on /tmp/mnt/disc0_3 type ext3 (rw,noatime)

    How can I check if there are restrictions for folder size and what can be reasons for that?
    Why do i get a free space message and how can I fix it?

Page 9 of 9 FirstFirst ... 789

Similar Threads

  1. Asus WL-500g Premium и шлюз
    By Grig_oriy in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 106
    Last Post: 15-05-2012, 21:43
  2. Установка svn на Asus WL-500g Premium
    By aka_mev in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 63
    Last Post: 19-03-2012, 21:01
  3. Сборка пакетов под WL-500g Premium
    By angel_il in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 127
    Last Post: 24-11-2011, 13:28
  4. WL-500g Premium died After Upgrading Firmware
    By acidbrain in forum WL-500gP Firmware Discussion
    Replies: 166
    Last Post: 17-06-2011, 08:59
  5. HOWTO use your WL-500g as IPv6 router
    By phedny in forum WL-500g/WL-500gx Tutorials
    Replies: 8
    Last Post: 17-02-2008, 08:19

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •