Iīve network with WL-500b in Client mode, WL-500gP in AP mode and I need to also connect WL-300g in AP mode, because in some parts of our house is poor signal of WL-500gP (and WL-300g Iīve at home and I donīt need it for anything else). I didnīt find a way, how to configure both AP to "cooperate" - I set the same SSID, same security, same access mode (and I allowed same MAC), on both is DHCP disabled, addresses of wi-fi and LAN ports are on the same subnet (192.168.1.x 255.255.255.0). When I use NetStubmler, I can see 2 Networks with the same SSID on different "canals" with different MAC.
What I expect? I connect to 1st AP (500gP) and when Iīm on place with poor signal of this AP, my wi-fi card will connect to 300g with better signal. And the same on opossite way. Is it possible to do it?

Thanks for help