конденсаторную ветку пора открывать =))
Подскажите , что делать дальше
log%
Code:
bReading :: TFTP Server.
Failed.: Timeout occured
................//.....................
Failed.: Timeout occured
Reading :: TFTP Server.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ╔| 7єК 26 16:41:16 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B840 (636992)
Initialized Data: 0x808319B0 - 0x80834090 (9952)
BSS Area: 0x80834090 - 0x80835840 (6064)
Local Heap: 0x80835840 - 0x80899840 (409600)
Stack Area: 0x80899840 - 0x8089B840 (8192)
Text (code) segment: 0x80800000 - 0x808319B0 (203184)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-24-8C-AD-D3-50, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)
Reading :: TFTP Server.
Failed.: Timeout occured
..............//..............
Reading :: TFTP Server.
Failed.: Interrupted
CFE> ?
Invalid command: "?"
Available commands: rndis, et, nvram, reboot, printdefault, flash, autoboot, batch, go, boot, load, write_block, write, read, save, ping, arp, ifconfig, unsetenv, printenv, setenv, help
*** command status = -1
CFE> help
Available commands:
rndis Broadcom USB RNDIS utility.
et Broadcom Ethernet utility.
nvram NVRAM utility.
reboot Reboot.
printdefault Display the environment default variables embeded in the bootloader
flash Update a flash memory device
autoboot Automatic system bootstrap.
batch Load a batch file into memory and execute it
go Verify and boot OS image.
boot Load an executable file into memory and execute it
load Load an executable file into memory without executing it
write_block Write a block of memory
write Write an address of memory
read Read a region of memory
save Save a region of memory to a remote file via TFTP
ping Ping a remote IP host.
arp Display or modify the ARP Table
ifconfig Configure the Ethernet interface
unsetenv Delete an environment variable.
printenv Display the environment variables
setenv Set an environment variable.
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE> printdefault
FLSHл] b
boardtype=0x0472
boardnum=45
boardrev=0x23
boardflags=0x10
parkid=1
clkfreq=264
sdram_init=0x0009
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0
et0macaddr=00:24:8C:AD:D3:50
et0phyaddr=30
et0mdcport=0
et1macaddr=00:90:4c:a1:00:2d
et1phyaddr=4
et1mdcport=0
gpio0=robo_reset
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
boot_wait=on
watchdog=3000
secret_code=75588472
hardware_version=WL500gW-01-00-00-00
regu*** command status = 0
CFE> nvram
*** command status = -8
CFE>
CFE> arp
No ARP entries.
*** command status = 0
CFE> rebootМ
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ╔| 7єК 26 16:41:16 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B840 (636992)
Initialized Data: 0x808319B0 - 0x80834090 (9952)
BSS Area: 0x80834090 - 0x80835840 (6064)
Local Heap: 0x80835840 - 0x80899840 (409600)
Stack Area: 0x80899840 - 0x8089B840 (8192)
Text (code) segment: 0x80800000 - 0x808319B0 (203184)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-24-8C-AD-D3-50, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Interrupted
CFE>
тот cfe который найден был на просторах интернета
видимо dd-wrt.
Пришлите пожалуйста fullflash на WL500-W
Ежели заливать через asus restoration родную прошивку,на 99% останавливается , спрашивает , а горят ли у вас светодиоды
и по кругу
и как потом поменять маки на свои ?
Заранее спасибо за просветляющий ответ .
спустя несколько часов
Дальше - лучше : отмыл и высушил эту плату - и опять не стартует
в терминале тишина , отпаял флешку - прочитал-первые 256 кб cfe.bin сравнились =(((((((
все питания есть , кварцы кварцуют , моя в печали
вот уж лучшее - враг хорошего =(