[USB] Printers

[darrellr]

Tested: WORKING
Model: WL-500g
Firmware: 1.7.6.2 test 4 (oleg) RAW on port 9101

Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 960c installed
USB Interface: YES
parallel port: No
URL To manufacturer: http://www.hp.co.uk
URL To product: ??

[faethon]

Tested: WORKING
Model: WL-500g
Firmware: 1.7.5.6 CR3 (Oleg customized, released 10/5)

Device
Brandname: Canon
Brandtype: i320
USB Interface: YES
parallel port: NO
URL To manufacturer: http://www.canon.com
URL To product: http://www.canon.co.uk/about_us/news...ter_bji320.asp

Notes:
1) Installed latest driver, which can be downloaded here: http://software.canon-europe.com/fil...e/b331cmux.exe
2) Added a new "Standard TCP/IP Port" in driver setup
3) Changed the raw port value from 9100 to 9101

[cnalpod]

Tested: WORKING
Model: WL-500g
Firmware: 1.7.5.6 CR3

Device
Brandname: Samsung
Brandtype: ML-1510
USB Interface: 1.1 compliant
parallel port: NO
URL To manufacturer: http://www.samsung.com
URL To product: ???

Note: Win ME and Win XP

[ricore]

Tested: WORKING
Model: WL-500g
Firmware: 1.9.2.7-3b

Device
Brandname: EPSON
Brandtype: Stylus C64 Photo Edition
Parallel port: Not tested yet
URL To manufacturer: http://www.epson.com/
URL To product: couldn't find it

[simon04]

Tested: WORKING
Model: WL-500g
Firmware: 1.9.2.7-2 (Oleg)

Device
Brandname: Canon
Brandtype: S750
USB Interface: YES
URL To manufacturer: http://www.canon.com
URL To product: http://www.canon.co.uk/for_home/prod...s750/index.asp
URL To driver: http://software.canon-europe.com/Pri...rs/S750604.asp

Settings: RAW, 9100; disabled StatusMonitor, Bidirectionla support

[Katsuya]

Tested: WORKING!
Model: WL-500b
Firmware: 1.9.2.7

Device
Brandname: Canon
Brandtype: MP-780
Interface: USB

[luka74]

Tested: Working (but no bidirectional support)
Model: WL-500g Deluxe
Firmware: 1.9.2.7-7b (Oleg's)

Device:
Brandname: Canon
Brandtype: i550
USB Interface: 2.0

Notes:
- bidirectional support does not seem work (even with p910nd -b)
- Canon Status Monitor has to be disabled (= no ink level status)
- No Out of paper reporting back to printer driver
- Manual Duplex/Booklet printing not possible due to above

[the bigboss]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7 (from ASUS website)/ tested with 1.6.5.3 but I didn't get it to work, could be due to lack of knowledge of myself

Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 656c
USB Interface: 1.1 compliant
URL To manufacturer: http://www.hp.com
URL To product:

Note: has some problems with RAW printing. Sometimes prints same pages multiple times and stops after he done 1 page than orange led is flashing. Press button to continue printing. Works fine with LPR printing method.

Note2: I advise to use te corporate drivers from the HP site. Otherwise you have to connect the printer to every PC in the network first. And you have to change the port where printer has to print to.

[Flappie]

Tested: Working (but no bidirectional support)
Model: WL-500g
Firmware: 1.9.2.7-7b (Oleg's)

Device:
Brandname: Canon
Brandtype: Pixma IP4200
USB Interface: 2.0

Notes:
- bidirectional support does not seem work
- Canon Status Monitor has to be disabled (= no ink level status)
- No Out of paper reporting back to printer driver
- Duplex printing available

[St3f]

Tested: Working
Model: WL-500g Deluxe
Firmware: 1.9.2.7-7b (Oleg's)

Device:
Brandname: Xerox
Brandtype: Phaser 3117

[ice]

Tested: Working
Model: HP LaserJet 1022
Firmware: 1.9.2.7-7b (Oleg's)

Device:
Brandname: HP
Brandtype: LaserJet 1022
USB Interface: 2.0

[tonych]

Tested: WORKING
Model: WL-500gx
Firmware: 1.9.2.7-7c Oleg

Device
Brandname: Xerox
Brandtype: Phaser 3117
USB Interface: USB 1.1
URL To manufacturer: http://www.xerox.ru
URL To product: http://xerox.ru/themes/basic/product...6&FoundID=4083

[Visi123]

Tested: WORKING! (bidirectional support not tested yet)
Model: WL-500gx
Firmware: Olegs 1.9.2.7-7c (Thank You!)

Device
Brandname: Epson
Brandtype: Stylus CX5400
USB Interface: 2.0
URL To manufacturer: http://www.epson.com
URL To product: not found on website

[Jacek_Nowicki]

Tested: NOT WORKING!
Model: WL-500g
Firmware: 1.9.5.4

Device
Brandname: HP (Hewlett Packard)
Brandtype: PSC 1510
USB Interface: 2.0 compliant
URL To manufacturer: http://www.hp.com

If sbdy can make it working, please write me.

[Visi123]

ested: WORKING! (bidirectional support not tested)
Model: WL-500gx
Firmware: Olegs 1.9.2.7-7c

Device
Brandname: Brother
Brandtype: HL-2030
USB Interface: 2.0
URL To manufacturer: http://www.brother.com
URL To product: http://www.brother.com/europe/printe...l2030_fea.html