Results 1 to 2 of 2

Thread: WL-300g dead! Reboot loop!

  1. #1

    WL-300g dead! Reboot loop!

    Hi there,

    I have a big problem here: One of my WL-300g APs is in a reboot loop! Recover mode is still working, but no firmware flashed with the firmware restauration tool or with a TFTP client will boot up without the reboot loop... (OpenWRT RC5, Asus 1936, Oleg 1927-7c)

    I unfortunately flashed the wrong firmware and so I bricked the AP. But since the recover mode can still be entered, there should be a possibiliy to get the AP back to life again!?

    I've read that there is a possibility to recover the WL-500g in this case, but the two files mentioned (wl500g-clear-nvram.trx and wl500g-recover.trx) won't work with the WL-300g, I think. Perhaps someone can send me the right files for my WL-300g?! (I've also read that clearing the NVRAM on WL-300g is not safe, because default values won't be restored by the bootloader! Is this true? How can I clear the NVRAM to defaults then?)

    Thank you for your help!

    Peace,
    OllieW

  2. #2
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    clear-nvram would work on this unit too.

Similar Threads

  1. Reboot on ISP disconnects ?
    By 7111 in forum WL-500g Q&A
    Replies: 6
    Last Post: 27-09-2006, 08:18
  2. Eigenes Script nach reboot mitstarten
    By triple in forum German Discussion - Deutsch (DE)
    Replies: 2
    Last Post: 16-05-2006, 21:12
  3. my harddisk close to being dead
    By mutejute in forum WL-HDD Q&A
    Replies: 0
    Last Post: 11-03-2006, 22:44
  4. Nach REBOOT wird die "post-boot" Datei nicht ausgeführt
    By Trebron in forum German Discussion - Deutsch (DE)
    Replies: 2
    Last Post: 02-02-2006, 15:20

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •