I haven't got the Premium yet, but the following method works on a WL300g:Originally Posted by TribesMan
Use the hidden admin page at http://192.168.1.1/Main_AdmStatus_Content.asp to run this command:
dd if=/dev/mtd/1ro of=/var/tmp/display.jpg
Then just download the firmware from http://192.168.1.1/display.jpg
This works because there is a dangling symlink from /www/display.jpg to /var/tmp/display.jpg, maybe intended for the webcam application?
You might want to check this with ls before issuing the dd command...
Two additional notes:
- The http server can't be trusted. I had to make several attempts to get the complete image.
- The downloaded image will end with a lot of "ff" data, caused by the empty flash area at the end (before the nvram partition). This is not part of the image and should probably be deleted before reflashing
No guarantees whatsoever
Bjørn