sn9c102.o available for WL500g??

[Pirat]

Hello ppl!

I'm searching for sn9c102.o for my WL-500g to use one of my two webcams.
But I didn't find anything.
Can anybody help my?

[WlanMan]

Hi

It´s simly not there.
Would be nice if you tell more exactly WHICH driver you want to use and cam you have, since there are more then one out for linux and this webcam chipset.

http://mxhaard.free.fr/spca5xx.html Is discussed elesewhere in the forum, MAY support it.

http://www.linux-projects.org/module...wcat.php?cid=2 will not work without rework since only for 2.6.15+ kernels.

Greets
Wlanman

[Pirat]

Thx!

My Cam is a Nortek Element One. (Vid=0x0c45 Pid=0x602c) and the other one is a Vivanco (Vid=0x0c45 Pid=0x6009).
Both are listed on the first link.
Nortek is listed as: "Generic 143 0x0c45 0x602c 350 Mp sn9c102 OV7630 Yes gbgr spca5xx"
Vivanco is listed as: "Trust 93 0x0c45 0x6009 120spaceC@M sn9c102 pas106a Yes gbrg spca5xx"
I'm looking at the pages, but I can't find a driver to download.

[WlanMan]

Both are listed on the first link.
Nortek is listed as: "Generic 143 0x0c45 0x602c 350 Mp sn9c102 OV7630 Yes gbgr spca5xx"
Vivanco is listed as: "Trust 93 0x0c45 0x6009 120spaceC@M sn9c102 pas106a Yes gbrg spca5xx"
I'm looking at the pages, but I can't find a driver to download.

Sure not, there are only sourcecode files.
Look at this Thread about the driver, maybe there is some working one, but generally it has not been includet to the firmware because of stability problems, you may call it "beta".
You can push that thread a bit, maybe now someone integrates it, i have no time atm .

Greets
Wlanman