Page 1 of 3 123 LastLast
Results 1 to 15 of 42

Thread: firmware of Wl-hdd on yakumo wireless Storage 60

  1. #1

    Want about $40 cheaper wl-hdd 60GB? See Yakumo Wireless Storage 60!

    High. See 100% identical product Yakumo Wireless Storage 60.
    http://www.yakumo.com/produkte/index...ss+LAN#1037087

  2. #2
    Join Date
    Jan 2005
    Location
    konstanz, germany
    Posts
    90

    Talking ... nice ... any experiences with fw diff to asus ?

    hi .-)

    NICE, but what about any differences to asus firmware?

    What about the price in germany ... could not find it anywhere .-( but i own a nice asus wlhdd ...

    Martin

  3. #3

    re:

    Wow, sorry, I was a little drunk last night. Not "high", but hi.
    I mean, firmware is totally the same, only with logo Yakumo (see manual). There's no reason you cannot upload aby other version of firmware (from ASUS, Oleg etc.). Price is about $200.

  4. #4

  5. #5
    Join Date
    Jan 2005
    Location
    konstanz, germany
    Posts
    90

    Talking cheaper ?

    Hi ...

    I got the asus wl-hdd2.5 from www.alternate.de for about 80 EURO (now only 69.- EURO) combined with a nice 80-100 GBs 2.5" HD (5400 U/min., 8MB cache, UMA-100) for about 100 EURO.

    @anarchist: your link is not available anymore ... no more restposten

    Good luck
    Martin
    Last edited by Martin1802; 15-08-2005 at 11:10. Reason: forgot something ... now some more infos

  6. #6

    Exclamation firmware of Wl-hdd on yakumo wireless Storage 60

    Hey guys ,
    i got the yakumo wireless storage 60 and i want to put the asus wl-hdd firmware on it because the device is the same but the yakumo firmware is kind of limited ... when i try to upgrade over the interface it says

    Firmware Upgrade Fail !
    Firmware upgrade fail. It may result from incorrect image, error transmission, or low memory level. Please check the version of firmare, reboot system and try again.


    Can you help me upgrading ?
    Thx for your replies

  7. #7
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    7

    Asus firmware on Yakumo

    Quote Originally Posted by surfingrace
    Hey guys ,
    Can you help me upgrading ?
    Hi, first at all: asus firmware runs on Yakumo, because it´s the same! Initially you can not upgrade via Yakumo´s setuppage!

    It´s a little bit tricky to install - you have to know how. And that´s my way (there was one weekend of trying):

    - download last original ASUS firmware from internet, not the other versions from oleg
    - assign a fixed IP Adress for Yakumo Wireless Storage 60 in Setuppage, such as 192.168.001.015
    - put Yakumo Wireless Storage 60 on LAN (by cable!, wireless doesn´t work)
    - press the button on back of device at least 5 seconds until the power lamp turns of, after some seconds all lamps are off: the device is off
    - pull the power cable
    - press and hold the button an put the power cable in, wait some seconds until the power lamp start to blink, release the button
    - device is now in "update"-mode
    - start the software "firmware restoration" from Yakumo utility directory
    - insert the path to the downloaded asus firmware
    - press upload -> the upload should be start
    - after this procedure you and rebooting your device you can go the the setup page and you will see the asus wl-hdd setup
    - from this point you can install all other firmware versions including the ons from oleg via the setup page
    - if you like to use the drive with twonky: it runs, no problem

    Any questions?

    flupps

  8. #8
    thanks flupps , i tried it but i don`t know how long to hold the button pressed longer than 20 seconds ?
    Thanks in advantage

  9. #9
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    7
    Quote Originally Posted by surfingrace
    thanks flupps , i tried it but i don`t know how long to hold the button pressed longer than 20 seconds ?
    Thanks in advantage
    Hi,

    pressing button on power ON:
    device off: ca. 5 sec -> all lamps go off
    factory settings and reboot: ca. 20 sec -> power lamp starts blinking fast (about 5 times)

    pressing button on power OFF and LAN-cable pluged:
    "Update"-Mode: ca. 5 sec -> power lamp start blinking slow and permanently

    flupps

  10. #10
    dammit , why doesn`t it do it ?

  11. #11
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    7
    Quote Originally Posted by surfingrace
    dammit , why doesn`t it do it ?
    Please write what you have done.

    flupps

  12. #12
    i pressed the button 5 sec ... shutdown
    then i pulled the powercable pressed the button again and i put the power cable back in and hold the button 5 sec

  13. #13
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    7

    Smile

    Thats fine. Do you have plugged the LAN cable? Without the cable network connection it doesn't works.

    Flupps

  14. #14
    yes its plugged in but it doesnt work

  15. #15
    Do i have to plug it directly into my pc ? because now its plugged into a switch

Page 1 of 3 123 LastLast

Similar Threads

  1. [HowTo] Getting started (Firmware upgr, Storage, Samba, SSH)
    By hezik in forum WL-500g/WL-500gx Tutorials
    Replies: 65
    Last Post: 26-08-2008, 12:52
  2. Firmware upgrading HOWTO
    By Styno in forum WL-500g/WL-500gx Tutorials
    Replies: 6
    Last Post: 30-07-2008, 22:00
  3. Custom Firmware v1.1.2.7
    By JOCKYW2001 in forum WL-HDD Firmware Releases
    Replies: 59
    Last Post: 11-12-2004, 13:26
  4. Flashing Oleg's Firmware in WL HDD
    By hugo in forum WL-HDD Custom Development
    Replies: 29
    Last Post: 21-10-2004, 15:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •