wl500g : wireless speed problems

**silver32** · 17-02-2006, 10:15

Hi

I'm french (scuse for my poor english)

I have a problem with my wireless connection between the wl500g and my centrino notebook.

Even at a distance of 2 meters between my router and my notebook, speed varies from 1 to 54 mb/s (the notebook can be even disconnected sometimes)

Considering the short distance, I think that there is a problem, how to solve it?

**mako2077** · 17-02-2006, 11:37

hi silver,

i 've got the same problem (see my thread http://wl500g.info/showthread.php?t=4452 !).

which FW are you using? the last Oleg 1.9.2.7-7b?
the last thing i tried is to type in the console:

wl scansupress 1

&

wl intereference 2

do NOT reboot the router, check it with "wl scansuppress" and "wl interference".
for me it seems to work! (at the moment, you never know

)

MARCO

**mako2077** · 18-02-2006, 16:53

unfortunately the problem came back!

i really don't know what to do else...

MARCO

**Snufkin** · 18-02-2006, 19:59

Originally Posted by mako2077

i really don't know what to do else...

Did you try wl rssidump? Post here output of this command (RSSI - Receiver Signal Strength Indicator).

**mako2077** · 19-02-2006, 11:43

hi snufkin,

i tried "wl rssidump", the result was this:

ACI is Active
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

this is the strenght of the signal!?

it looks ok, doesn' t it!?

MARCO

**Snufkin** · 19-02-2006, 12:58

Originally Posted by mako2077

i tried "wl rssidump", the result was this:

Code:

ACI is Active
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

it looks ok, doesn' t it!?MARCO

Looks very strange

Mine shows

Code:

ACI is Inactive
Channel 1 :
Channel 2 :
Channel 3 :
Channel 4 :
Channel 5 :
Channel 6 :
Channel 7 :
Channel 8 : 3 5 4 2 4 4 2 2 3 4 3 3 3 4 3 3 3 3 2 4 2 3 3 3 3 2 2 3 4 2 3 3 3 3 2 3 3 4 3 3 3 3 3 2 3 3 3 3 3 2
Channel 9 : 3 3 3 2 2 2 3 2 2 2 3 1 3 2 2 2 3 3 3 2 3 2 2 3 2 2 3 1 4 3 3 2 3 3 3 3 2 2 2 3 2 4 3 3 2 4 3 2 2 4
Channel 10 : 2 2 3 2 4 3 3 2 2 3 2 1 2 2 2 3 2 3 2 2 3 3 3 2 3 3 3 2 3 3 3 2 2 3 3 3 4 3 2 3 2 2 3 3 3 2 4 3 3 1
Channel 11 :
Channel 12 :
Channel 13 :

In your case ACI is Active, and it needs further investigation.

**mako2077** · 19-02-2006, 13:11

maybe this is because i used

"wl interference 2" and "wl scansuppress 1".

switching interference off ( "wl interference 0" ) i get:

Code:

ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

what do all the 0s mean??
what is ACI? should it be active or inactive???

wl aciargs:

Code:

Glitch count to enter ACI scan mode: 1000
Glitch count to exit ACI mode: 200
Usecs to spin between rssi samples : 10
Interval (in seconds) for ACI scanning in presence of high glitch count: 20

MARCO

**mako2077** · 20-02-2006, 19:26

what ever this means, but today i get:

Code:

ACI is Inactive
Channel 1 : 
Channel 2 : 
Channel 3 : 
Channel 4 : 4 3 3 3 4 2 4 2 2 2 3 3 -20 -20 -18 -20 -18 -20 -18 -21 -19 -20 -19 -20 -18 -20 -20 -19 -20 -19 -20 -19 -20 -18 -20 -18 -20 -20 -20 -18 -20 -20 -20 -19 -20 -19 -20 -19 -21 -18 
Channel 5 : 2 3 3 2 2 2 3 3 3 3 2 1 2 2 4 3 
Channel 6 : -3 
Channel 7 : 
Channel 8 : 
Channel 9 : 
Channel 10 : 
Channel 11 : 
Channel 12 : 
Channel 13 :

is this now the standard output??
well, my wireless is working right now, with my centrino (intel 2200bg minicard inside)!!! speed and everything else seem to be ok.

the strange thing, i really don't know why? i didn't change anything!

(at least i can't remember)

"wl txpwr" --> txpwr is 25
"wl txpwr1" --> TxPower is 56 qdbm, 14.00 dbm, 25 mW Override is Off
"wl rssi" --> eth1: Invalid argument
rssi Get the current RSSI val, for an AP you must specify the mac addr of the STA

nvram show | grep wl -->

Code:

wl_radius_port=1812
wl_mode_x=0
wl0_frameburst=off
filter_wl_default_x=ACCEPT
wl_wdsapply_x=0
wl_gmode_protection_x=0
wl0_akm=
wl_maxassoc=128
wl0_phrase_x=
wl_phytypes=
wl0_infra=1
wl0_country_code=DE
wl_infra=1
filter_wl_time_x=00002359
wl_maclist_x=
wl_radio_x=1
wl0_wme_sta_be=15 1023 3 0 0 off
wl_radius_ipaddr=
wl0_gmode_protection_x=0
wl0_ifname=eth1
wl0_wme_sta_bk=15 1023 7 0 0 off
wl_wdsnum_x=0
wl_net_reauth=36000
wl0_mrate=0
wl0_mode=ap
wl0_ap_isolate=0
wl0_radio_x=1
wl_mrate=0
wl_akm=
filter_wl_date_x=1111111
wl0_wme_no_ack=off
wl0_gmode=1
filter_wl_icmp_x=
wl_gmode=1
wl0_dtim=1
wl0_ssid=wlan
wl_wme_sta_vi=7 15 2 6016 3008 off
filter_wl_dstport_x=
fw_wl_enable_x=0
wl0_macnum_x=0
wl_wme_ap_be=15 63 3 0 0 off
wl_plcphdr=long
wl_wme_sta_vo=3 7 2 3264 1504 off
wl_macmode=disabled
wl_wme_ap_bk=15 1023 7 0 0 off
wl0_key1=:-) :-) :-)
wl_phytype=b
wl0_key2=:-) :-) :-)
wl_lazywds=0
wl0_key3=:-) :-) :-)
wl0_wdslist_x=
wl0_key4=:-) :-) :-)
wl_auth_mode=open
wl0_radio_power_x=19
wl_wpa_psk=:-) :-) :-)
filter_wl_num_x=0
wl0_wme_ap_vi=7 15 1 6016 3008 off
wl_mode=ap
wl0_wdsapply_x=0
wl0_closed=0
wl0_plcphdr=long
wl0_rate=0
wl0_macmode=disabled
wl_wpa_gtk_rekey=0
wl0_radioids=BCM2050
wl0_wme_ap_vo=3 7 1 3264 1504 off
wl0_phytype=g
wl0_lazywds=0
filter_wl_dstip_x=
wl0_afterburner=off
wl0_antdiv=-1
wl_chan_list=1 2 3 4 5 6 7 8 9 10 11 12 13
wl_wds_timeout=0
wl0_radio_time_x=00002359
wl0_mode_x=0
wl_ssid=wlan
wl_dtim=1
wl_mode_ex=ap
wl0_wpa_psk= :-) :-) :-)
wl_macapply_x=Both
wl_key1=:-) :-) :-)
wl_key2=:-) :-) :-)
wl0_unit=0
wl_key3=:-) :-) :-)
wl_key4=:-) :-) :-)
wl_country_code=DE
wl_hwaddr=
wl0_net_reauth=36000
wl0_mode_ex=ap
wl0_radio_date_x=1111111
wl0_wds=
filter_wl_proto_x=
wl_rate=0
wl_phrase_x=:-) :-) :-)
wl0_wep_x=0
wl0_radius_port=1812
wl0_wme=off
wl0_auth=0
wl0_radius_ipaddr=
wl0_wme_sta_vi=7 15 2 6016 3008 off
wl_country=
wl_wep_x=1
wl0_wme_sta_vo=3 7 2 3264 1504 off
wl_rateset=default
wl_crypto=aes
wl_radius_key=
wl0_maxassoc=128
wl_unit=0
SystemCmd=wl interference
wl0_phytypes=g
wl0_frag=2346
wl0_wep=enabled
wl0_country=
wl_wdslist_x=
wl_wds=
wl0_rateset=default
wl_wme=off
wl_wme_ap_vi=7 15 1 6016 3008 off
filter_wl_srcip_x=
wl0_wdsnum_x=0
wl_auth=0
wl_wme_ap_vo=3 7 1 3264 1504 off
wl_frameburst=off
wl_macnum_x=0
wl0_macapply_x=Both
wl0_rts=2347
wl_ifname=
wl_wep=disabled
wl0_maclist_x=
wl_gmode_protection=off
wl0_wpa_gtk_rekey=0
wl_radio_time_x=00002359
wl_frag=2346
wl0_key=1
wl_preauth=1
wl_maclist=
filter_wl_srcport_x=
wl_wme_sta_be=15 1023 3 0 0 off
wl_radioids=
wl0_radio=1
wl_corerev=
wl_channel=0
wl0_bcn=100
wl_wme_sta_bk=15 1023 7 0 0 off
wl0_hwaddr=00:15:F2:3D:7A:2C
wl_radio=1
wl_afterburner=off
wl0_preauth=1
wl0_gmode_protection=off
wl_radio_date_x=1111111
wl0_maclist=
wl_rts=2347
wl_ap_isolate=0
wl_wme_no_ack=off
wl0_radius_key=
wl0_wme_ap_be=15 63 3 0 0 off
wl_radio_power_x=25
wl0_corerev=5
wl_key=1
wl0_channel=0
wl0_wds_timeout=0
wl0_wme_ap_bk=15 1023 7 0 0 off
wl0_auth_mode=none
wl_closed=0
wl0_crypto=aes
wl_bcn=100
wl_antdiv=-1

(all used keys or phrases are ":-) :-) :-)"

i really don't understand all these variables. sorry. i hope everything is ok now! to be honest i don't trust my system (centrino+wl-500gx+1.9.2.7-7b)... but i'll see, yesterday and today it seemed to be stable. but i already got this feeling once and on the next day nothing worked anymore. maybe now!!

a big, big thank to everyone, helping me out! also in the german forum!!!

MARCO

**silver32** · 20-02-2006, 20:57

My actual firmware is the 1.8.1.7-2a

**Oleg** · 21-02-2006, 09:04

Originally Posted by silver32

My actual firmware is the 1.8.1.7-2a

Upgrade to 1.9.2.7-7b, it should be much stable.

**silver32** · 04-03-2006, 10:00

Ok, my routeur is now upgrade with the 1.9.2.7-7b firmware but problems are
still here.

command "wl rssidump" give :

ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

and

txpwr is 19

TxPower is 51 qdbm, 12.75 dbm, 19 mW Override is Off

**mako2077** · 04-03-2006, 11:20

hi silver32,

today, my wireless died again. i can't use it anymore...

this is very strange, because it worked well the last two weeks! i did not change anything at all! i think there is a big problem of the Oleg FW 1.9.2.7-7b, if there are many other networks around you. today there are 7 other networks around me. i really don't understand!

I AM WAITING FOR A NEW OLEG FW!!!

MARCO

Code:

ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

EDIT: now it is working again! with the same output!!!

**silver32** · 04-03-2006, 12:59

despite all "0", my wireless connection is degraded but works a little (It seems that the new firmware didn't change anything)

edit, i did a new wl rssidump :

ACI is Inactive
Channel 1 : 5 6 6 5 5 5 6 5 6 4 4 4 4 5 5 4 6 5 4 4 4 6 5 5 5 5 6 6 5 3 5 5 5 4 5 5 6 4 4 6 5 6 4 4 3 5 4 4 5 4
Channel 2 : 4 5 6 3 4 5 3 4 5 5 5 6 7 5 5 3 6 4 5 4 4 5 6 6 5 4 6 4 6 5 4 6 3 4 5 6 4 4 5 5 5 5 4 4 5 5 5 5 4 6
Channel 3 : 3 4 6 4 5 5 5 4 5 4 4 4 4 6 7 5 5 4 4 5 4 7 4 5 6 5 4 6 5 5 5 4 6 4 4 6 4 5 4 5 4 5 4 4 5 5 6 5 3 4
Channel 4 :
Channel 5 :
Channel 6 :
Channel 7 :
Channel 8 :
Channel 9 : 5 4 5 7 6 6 7 6 5 6 5 6 5 6 4 7 6 5 5 6 6 4 6 5 6 4 5 5 5 6 4 6 5 5 5 6 5 6 5 6 5 5 5 6 4 6 5 6 6 5
Channel 10 : 6 4 5 5 4 6 5 5 5 6 6 5 5 6 6 4 6 6 6 6 5 4 6 4 6 6 5 6 5 6 4 4 6 4 5 5 6 5 6 4 5 6 5 6 5 6 6 4 6 7
Channel 11 : 5 4 3 6 4 5 6 5 5 4 6 5 5 6 5 5 5 6 6 5 6 4 6 4 5 5 4 6 5 5 5 6 6 5 5 4 5 4 4 5 4 6 5 5 4 3 4 5 4 3
Channel 12 :
Channel 13 :

... I don't understand anything

**silver32** · 09-03-2006, 10:07

Yesterday, I lost completly the wireless connection.
Today it works a little...

Should I change some setting to get more stable this *bip* connection ???

**max2950** · 11-03-2006, 08:01

Originally Posted by silver32

Hi

I'm french (scuse for my poor english)

I have a problem with my wireless connection between the wl500g and my centrino notebook.

Even at a distance of 2 meters between my router and my notebook, speed varies from 1 to 54 mb/s (the notebook can be even disconnected sometimes)

Considering the short distance, I think that there is a problem, how to solve it?

Bonjour je suis Francais et j'ai eu le meme probleme.
Je vais continuer en anglais que tout le monde puisse profiter de mon experience.

So here is my experience with my Centrino. I'm owning an Acer TM800 and all was fine since the day i upgraded the drivers from v8.1.1 to v9.x.x. After upgrading i had the same symptoms as you. The Asus doesn't seem to be faulty since i had the same problems at my workplace with a Netgear AP....
At my workplace a colleague is experiencing the same issues with a Sony Centrino notebook.

I got so pissed of by this Intel card that i replaced it with a Gigabyte WI01GS based on a Ralink chipset..... Now everything is just find, i can even connect to AP's the Intel card would'nt let me connect (even with drivers v8.1.1). I bought the card on eBay Germany.

If you want to downgrade to v8.1.1 to test let me know, because this old version of the driver is no more avilable on Intel's website, but i can upload it somewhere.

PS : No matter what driver version i was using i always had the best results using the Intel utility rather than the Windows utility.

Thread: wl500g : wireless speed problems

Thread Tools

Rate This Thread

Display

wl500g : wireless speed problems

ACI is Active / Inactive

Similar Threads

Router doesn't see USB disk anymore

WAN port dies after a time of traffic

Firmware v1.7.5.6 CR5 [Oleg]

Total crash every day

WL500G behind a WLAN-Ethernet bridge - how it works?

Posting Permissions