Results 1 to 9 of 9

Thread: Total crash every day

  1. #1

    Total crash every day

    Last days my ASUS WL-500g crashes every day it does a full reset but i dont know why. Anyone know how to fix this?

    This is in the system log:
    Code:
    Jan  1 01:00:13  syslog.notice klogd: klogd started: BusyBox v1.00-pre7 (2004.05.29-20:06+0000)
    Jan  1 01:00:13  user.warn klogd: CPU revision is: 00024000
    Jan  1 01:00:13  user.warn klogd: Loading BCM4710 MMU routines.
    Jan  1 01:00:13  user.warn klogd: Primary instruction cache 8kb, linesize 16 bytes (2 ways)
    Jan  1 01:00:13  user.warn klogd: Primary data cache 4kb, linesize 16 bytes (2 ways)
    Jan  1 01:00:13  user.warn klogd: Linux version 2.4.20 (root@omnibook) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #24 Mon May 3 20:52:46 MSD 2004
    Jan  1 01:00:13  user.warn klogd: Determined physical RAM map:
    Jan  1 01:00:13  user.warn klogd:  memory: 01000000 @ 00000000 (usable)
    Jan  1 01:00:13  user.warn klogd: On node 0 totalpages: 4096
    Jan  1 01:00:13  user.warn klogd: zone(0): 4096 pages.
    Jan  1 01:00:13  user.warn klogd: zone(1): 0 pages.
    Jan  1 01:00:13  user.warn klogd: zone(2): 0 pages.
    Jan  1 01:00:13  user.warn klogd: Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc
    Jan  1 01:00:13  user.warn klogd: CPU: BCM4710 rev 0 at 125 MHz
    Jan  1 01:00:13  user.warn klogd: Calibrating delay loop... 82.94 BogoMIPS
    Jan  1 01:00:13  user.warn klogd: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Jan  1 01:00:13  user.warn klogd: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Jan  1 01:00:13  user.warn klogd: Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jan  1 01:00:13  user.warn klogd: Checking for 'wait' instruction...  unavailable.
    Jan  1 01:00:13  user.warn klogd: POSIX conformance testing by UNIFIX
    Jan  1 01:00:13  user.warn klogd: PCI: Fixing up bus 0
    Jan  1 01:00:13  user.warn klogd: PCI: Fixing up bridge
    Jan  1 01:00:13  user.warn klogd: PCI: Fixing up bus 1
    Jan  1 01:00:13  user.warn klogd: Initializing RT netlink socket
    Jan  1 01:00:13  user.warn klogd: Starting kswapd
    Jan  1 01:00:13  user.notice klogd: NTFS driver v1.1.22 [Flags: R/O]
    Jan  1 01:00:13  user.warn klogd: pty: 256 Unix98 ptys configured
    Jan  1 01:00:13  user.notice klogd:  Amd/Fujitsu Extended Query Table v1.1 at 0x0040
    Jan  1 01:00:13  user.warn klogd: Physically mapped flash: Swapping erase regions for broken CFI table.
    Jan  1 01:00:13  user.notice klogd: number of CFI chips: 1
    Jan  1 01:00:13  user.notice klogd: Flash device: 0x400000 at 0x1fc00000
    Jan  1 01:00:13  user.notice klogd: Physically mapped flash: squashfs filesystem found at block 949
    Jan  1 01:00:14  user.notice klogd: Creating 5 MTD partitions on "Physically mapped flash":
    Jan  1 01:00:14  user.notice klogd: 0x00000000-0x00040000 : "pmon"
    Jan  1 01:00:14  user.notice klogd: 0x00040000-0x003e0000 : "linux"
    Jan  1 01:00:14  user.notice klogd: 0x000ed760-0x003e0000 : "rootfs"
    Jan  1 01:00:14  user.notice klogd: 0x003f0000-0x00400000 : "nvram"
    Jan  1 01:00:14  user.notice klogd: 0x003e0000-0x003f0000 : "config"
    Jan  1 01:00:14  user.warn klogd: ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
    Jan  1 01:00:14  user.warn klogd: ip_conntrack_pptp version 1.9 loaded
    Jan  1 01:00:14  user.warn klogd: ip_nat_pptp version 1.5 loaded
    Jan  1 01:00:14  user.warn klogd: ip_tables: (C) 2000-2002 Netfilter core team
    Jan  1 01:00:14  user.warn klogd: ipt_time loading
    Jan  1 01:00:14  user.warn klogd: FAT: bogus logical sector size 61440
    Jan  1 01:00:14  user.warn klogd: FAT: bogus logical sector size 61440
    Jan  1 01:00:14  user.err klogd: NTFS: Unable to set blocksize 512.
    Jan  1 01:00:14  user.warn klogd: VFS: Mounted root (squashfs filesystem) readonly.
    Jan  1 01:00:14  user.warn klogd: Warning: unable to open an initial console.
    Jan  1 01:00:14  user.warn klogd: Algorithmics/MIPS FPU Emulator v1.5
    Jan  1 01:00:14  user.warn klogd: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
    Jan  1 01:00:14  user.warn klogd: eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
    Jan  1 01:00:14  user.warn klogd: PCI: Enabling device 01:02.0 (0004 -> 0006)
    Jan  1 01:00:14  user.warn klogd: eth2: Broadcom BCM43XX 802.11 Wireless Controller  3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004)
    Jan  1 00:00:14  daemon.notice pppd[291]: pppd 2.4.1 started by (unknown), uid 0
    Jan  1 00:00:14  daemon.notice pppd[291]: local  IP address 10.64.64.64
    Jan  1 00:00:14  daemon.notice pppd[291]: remote IP address 10.112.112.112
    Jan  1 01:00:25  user.warn klogd: lp driver: get device ID
    Jan  1 01:00:25  user.warn klogd: neg fail
    Jan  1 00:00:31  daemon.notice pppd[291]: Connect: ppp0 <--> /dev/pts/0
    Jan  1 01:00:35  user.warn klogd: Register User Space Key Handler : 535 0
    Jan  1 00:00:35  daemon.notice pptp[541]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
    Jan  1 00:00:36  daemon.notice pptp[541]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 0). 
    Jan  1 00:00:38  daemon.err pppd[291]: PAP authentication failed
    Jan  1 00:00:38  daemon.notice pppd[291]: Connection terminated.
    Jan  1 00:00:38  daemon.notice pptp[538]: log[decaps_hdlc:pptp_gre.c:129]: short read (4294967295): Input/output error
    Jan  1 00:00:38  daemon.notice pptp[541]: log[callmgr_main:pptp_callmgr.c:246]: Closing connection
    Jan  1 00:00:38  daemon.notice pptp[541]: log[pptp_conn_close:pptp_ctrl.c:307]: Closing PPTP connection
    Jan  1 00:00:40  daemon.notice pptp[541]: log[call_callback:pptp_callmgr.c:89]: Closing connection
    Jan  1 00:01:12  daemon.notice pppd[291]: Connect: ppp0 <--> /dev/pts/0
    Jan  1 00:01:12  daemon.notice pptp[555]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
    Jan  1 00:01:13  daemon.notice pptp[555]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 0). 
    Jan  1 00:01:16  daemon.err pppd[291]: PAP authentication failed
    Jan  1 00:01:16  daemon.notice pppd[291]: Connection terminated.
    Jan  1 00:01:16  daemon.notice pptp[553]: log[decaps_hdlc:pptp_gre.c:129]: short read (4294967295): Input/output error
    Jan  1 00:01:16  daemon.notice pptp[555]: log[callmgr_main:pptp_callmgr.c:246]: Closing connection
    Jan  1 00:01:16  daemon.notice pptp[555]: log[pptp_conn_close:pptp_ctrl.c:307]: Closing PPTP connection
    Jan  1 00:01:18  daemon.notice pptp[555]: log[call_callback:pptp_callmgr.c:89]: Closing connection
    Jan  1 00:01:48  daemon.notice pppd[291]: Connect: ppp0 <--> /dev/pts/0
    Jan  1 00:01:48  daemon.notice pptp[567]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
    Jan  1 00:01:49  daemon.notice pptp[567]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 0). 
    Jan  1 00:01:53  daemon.err pppd[291]: PAP authentication failed
    Jan  1 00:01:53  daemon.notice pppd[291]: Connection terminated.
    Jan  1 00:01:53  daemon.notice pptp[565]: log[decaps_hdlc:pptp_gre.c:129]: short read (4294967295): Input/output error
    Jan  1 00:01:53  daemon.notice pptp[567]: log[callmgr_main:pptp_callmgr.c:246]: Closing connection
    Jan  1 00:01:53  daemon.notice pptp[567]: log[pptp_conn_close:pptp_ctrl.c:307]: Closing PPTP connection
    Jan  1 00:01:55  daemon.notice pptp[567]: log[call_callback:pptp_callmgr.c:89]: Closing connection
    Jan  1 00:02:24  daemon.notice pppd[291]: Connect: ppp0 <--> /dev/pts/0
    Jan  1 00:02:24  daemon.notice pptp[636]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
    Jan  1 00:02:25  daemon.notice pptp[636]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 0). 
    Jan  1 00:02:28  daemon.warn pppd[291]: Local IP address changed to 62.131.198.87
    Jan  1 00:02:28  daemon.warn pppd[291]: Remote IP address changed to 195.190.241.52
    Jan  1 01:02:29  user.notice PPTP: connect to server since boot up for 149 seconds
    Jun  1 19:40:42  user.emerg NTP client: time is synchronized to 195.121.1.68
    I'm running the last custom firmware (CR5) by oleg, all other firmwares had the same problem.
    Last edited by Djuri; 01-06-2004 at 20:23.

  2. #2
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    can you define 'crash' please ?

    ps. power the unit off for 10 minutes, and turn on after that see if the 'crash?' stays..

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

  3. #3
    Join Date
    Jan 2004
    Location
    Oslo, Norway
    Posts
    5

    Me too...

    Seems like I'm suffering from the same problem.
    I use IP telephony, and have noticed that I often get disconnected. Now when my search for errors came to the WL500g I noticed in the Status log that the uptime was only 3 hours, although I haven't turned it off and on in several weeks. I'm suspecting it keeps booting every so often, and I will check the uptime log several times per day the next days to confirm it.

    Firmware 1.7.5.6, bootloader 2.2.

    Should I try another firmware, you think?

    Thanks,
    Christopher

    Here's a dump of the system log:

    Jan 1 01:00:13 WL500g syslog.notice klogd: klogd started: BusyBox v1.00-pre7 (2004.04.08-18:44+0000)
    Jan 1 01:00:13 WL500g user.warn klogd: CPU revision is: 00024000
    Jan 1 01:00:13 WL500g user.warn klogd: Loading BCM4710 MMU routines.
    Jan 1 01:00:13 WL500g user.warn klogd: Primary instruction cache 8kb, linesize 16 bytes (2 ways)
    Jan 1 01:00:13 WL500g user.warn klogd: Primary data cache 4kb, linesize 16 bytes (2 ways)
    Jan 1 01:00:13 WL500g user.warn klogd: Linux version 2.4.20 (root@omnibook) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #14 Mon Mar 29 00:07:24 MSD 2004
    Jan 1 01:00:13 WL500g user.warn klogd: Determined physical RAM map:
    Jan 1 01:00:13 WL500g user.warn klogd: memory: 01000000 @ 00000000 (usable)
    Jan 1 01:00:13 WL500g user.warn klogd: On node 0 totalpages: 4096
    Jan 1 01:00:13 WL500g user.warn klogd: zone(0): 4096 pages.
    Jan 1 01:00:13 WL500g user.warn klogd: zone(1): 0 pages.
    Jan 1 01:00:13 WL500g user.warn klogd: zone(2): 0 pages.
    Jan 1 01:00:13 WL500g user.warn klogd: Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc
    Jan 1 01:00:13 WL500g user.warn klogd: CPU: BCM4710 rev 0 at 125 MHz
    Jan 1 01:00:13 WL500g user.warn klogd: Calibrating delay loop... 82.94 BogoMIPS
    Jan 1 01:00:13 WL500g user.warn klogd: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Jan 1 01:00:13 WL500g user.warn klogd: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Jan 1 01:00:13 WL500g user.warn klogd: Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jan 1 01:00:13 WL500g user.warn klogd: Checking for 'wait' instruction... unavailable.
    Jan 1 01:00:13 WL500g user.warn klogd: POSIX conformance testing by UNIFIX
    Jan 1 01:00:13 WL500g user.warn klogd: PCI: Fixing up bus 0
    Jan 1 01:00:13 WL500g user.warn klogd: PCI: Fixing up bridge
    Jan 1 01:00:13 WL500g user.warn klogd: PCI: Fixing up bus 1
    Jan 1 01:00:13 WL500g user.warn klogd: Initializing RT netlink socket
    Jan 1 01:00:13 WL500g user.warn klogd: Starting kswapd
    Jan 1 01:00:13 WL500g user.notice klogd: NTFS driver v1.1.22 [Flags: R/O]
    Jan 1 01:00:13 WL500g user.warn klogd: pty: 256 Unix98 ptys configured
    Jan 1 01:00:13 WL500g user.notice klogd: Amd/Fujitsu Extended Query Table v1.1 at 0x0040
    Jan 1 01:00:13 WL500g user.warn klogd: Physically mapped flash: Swapping erase regions for broken CFI table.
    Jan 1 01:00:13 WL500g user.notice klogd: number of CFI chips: 1
    Jan 1 01:00:13 WL500g user.notice klogd: Flash device: 0x400000 at 0x1fc00000
    Jan 1 01:00:13 WL500g user.notice klogd: Physically mapped flash: cramfs filesystem found at block 944
    Jan 1 01:00:13 WL500g user.notice klogd: Creating 4 MTD partitions on "Physically mapped flash":
    Jan 1 01:00:13 WL500g user.notice klogd: 0x00000000-0x00040000 : "pmon"
    Jan 1 01:00:13 WL500g user.notice klogd: 0x00040000-0x003f0000 : "linux"
    Jan 1 01:00:13 WL500g user.notice klogd: 0x000ec15c-0x003f0000 : "rootfs"
    Jan 1 01:00:13 WL500g user.notice klogd: 0x003f0000-0x00400000 : "nvram"
    Jan 1 01:00:13 WL500g user.warn klogd: ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
    Jan 1 01:00:13 WL500g user.warn klogd: ip_conntrack_pptp version 1.9 loaded
    Jan 1 01:00:13 WL500g user.warn klogd: ip_nat_pptp version 1.5 loaded
    Jan 1 01:00:13 WL500g user.warn klogd: ip_tables: (C) 2000-2002 Netfilter core team
    Jan 1 01:00:13 WL500g user.warn klogd: ipt_time loading
    Jan 1 01:00:13 WL500g user.warn klogd: VFS: Mounted root (cramfs filesystem) readonly.
    Jan 1 01:00:13 WL500g user.warn klogd: Warning: unable to open an initial console.
    Jan 1 01:00:13 WL500g user.warn klogd: Algorithmics/MIPS FPU Emulator v1.5
    Jan 1 01:00:13 WL500g user.warn klogd: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
    Jan 1 01:00:13 WL500g user.warn klogd: eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
    Jan 1 01:00:13 WL500g user.warn klogd: PCI: Enabling device 01:02.0 (0004 -> 0006)
    Jan 1 01:00:13 WL500g user.warn klogd: eth2: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004)
    Jan 1 01:00:18 WL500g user.notice dhcp client: deconfig: lease is lost
    Jan 1 01:00:19 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=193.216.69.126 DST=193.217.2.212 LEN=48 TOS=0x00 PREC=0x00 TTL=251 ID=52911 PROTO=ICMP TYPE=8 CODE=0 ID=15600 SEQ=0
    Jan 1 01:00:19 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=193.216.1.59 DST=193.217.2.212 LEN=48 TOS=0x00 PREC=0x00 TTL=252 ID=58 PROTO=ICMP TYPE=8 CODE=0 ID=15600 SEQ=0
    Jan 1 01:00:19 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:90:bd:17:54:08:00 SRC=193.217.152.1 DST=255.255.255.255 LEN=337 TOS=0x00 PREC=0x00 TTL=255 ID=60591 PROTO=UDP SPT=67 DPT=68 LEN=317
    Jan 1 01:00:19 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:90:bd:17:54:08:00 SRC=193.217.152.1 DST=255.255.255.255 LEN=337 TOS=0x00 PREC=0x00 TTL=255 ID=60592 PROTO=UDP SPT=67 DPT=68 LEN=317
    Jan 1 01:00:20 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:90:bd:17:54:08:00 SRC=193.217.152.1 DST=255.255.255.255 LEN=337 TOS=0x00 PREC=0x00 TTL=255 ID=60595 PROTO=UDP SPT=67 DPT=68 LEN=317
    Jan 1 01:00:20 WL500g daemon.warn dnsmasq[450]: failed to drop root privs
    Jan 1 01:00:21 WL500g user.notice dhcp client: bound IP address 193.217.2.212 from server 193.217.152.1
    Jan 1 01:00:26 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=81.10.175.71 DST=193.217.2.212 LEN=119 TOS=0x00 PREC=0x00 TTL=115 ID=49291 DF PROTO=TCP SPT=53442 DPT=3505 WINDOW=63714 RES=0x00 ACK PSH URGP=0
    Jan 1 01:00:27 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=81.10.175.71 DST=193.217.2.212 LEN=119 TOS=0x00 PREC=0x00 TTL=115 ID=49317 DF PROTO=TCP SPT=53442 DPT=3505 WINDOW=63714 RES=0x00 ACK PSH URGP=0
    Jan 1 01:00:27 WL500g user.warn klogd: lp driver: get device ID
    Jan 1 01:00:27 WL500g user.warn klogd: neg fail
    Jan 1 01:00:28 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=81.10.175.71 DST=193.217.2.212 LEN=198 TOS=0x00 PREC=0x00 TTL=115 ID=49388 DF PROTO=TCP SPT=53442 DPT=3505 WINDOW=63714 RES=0x00 ACK PSH URGP=0
    Jun 6 18:54:48 WL500g user.warn klogd: Register User Space Key Handler : 664 0
    Jun 6 18:54:48 WL500g user.emerg NTP client: time is synchronized to 131.107.1.10
    Jun 6 18:54:48 WL500g user.warn klogd: ALERTIN=eth1 OUT= MAC=00:0c:6e:de:78:dc:00:0f:90:bd:17:54:08:00 SRC=81.10.175.71 DST=193.217.2.212 LEN=198 TOS=0x00 PREC=0x00 TTL=115 ID=49509 DF PROTO=TCP SPT=53442 DPT=3505 WINDOW=63714 RES=0x00 ACK PSH URGP=0

  4. #4
    Join Date
    Jan 2004
    Location
    Oslo, Norway
    Posts
    5

    Unhappy

    Just checked, and uptime was now 8 hours 10 minutes, which means it rebooted again last night around 4am.
    Yesterday it rebooted at approx. 6:30pm.

    I'm gonna try to install the latest official firmware to see if things improve.

    Does anyone else experience reboots like these?

    Firmware is 1.7.5.6-2 to be more precicely.

    /Christopher

  5. #5
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    One of the possible reason for reboot is the number of WLAN receive errors. If it's the case try executing
    Code:
    echo 1 > /dev/gpio/outen
    after that it should not reboot until you reboot it manually. If it stops rebooting after this, then let me know.

  6. #6
    Join Date
    Jan 2004
    Location
    Oslo, Norway
    Posts
    5
    Quote Originally Posted by Oleg
    One of the possible reason for reboot is the number of WLAN receive errors. If it's the case try executing
    Code:
    echo 1 > /dev/gpio/outen
    after that it should not reboot until you reboot it manually. If it stops rebooting after this, then let me know.
    OK, I did it from the System Command window.
    I'll let you know how things work out.

    Thanks.
    Christopher

  7. #7
    Quote Originally Posted by Antiloop
    can you define 'crash' please ?

    ps. power the unit off for 10 minutes, and turn on after that see if the 'crash?' stays..
    The 10 minutes turn off did work thanks.
    It's up for 1 week now.

  8. #8
    Quote Originally Posted by Djuri
    The 10 minutes turn off did work thanks.
    It's up for 1 week now.
    ha ~~~ it's really funny... any one can tell me the logical for that?

  9. #9
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Yes, at least one - incorrect memory size detection after the firmware upgrade.

Similar Threads

  1. Help WLHDD firmware update crash
    By math_67 in forum WL-HDD Q&A
    Replies: 3
    Last Post: 07-06-2005, 15:24
  2. 500gx causes system to crash
    By oswald in forum WL-500g Q&A
    Replies: 19
    Last Post: 26-04-2005, 13:48
  3. Total Download-Volume Limitation
    By gbrancovici in forum WL-500g Q&A
    Replies: 4
    Last Post: 09-04-2005, 15:22
  4. WinXP Crash when using Http interface
    By calimero in forum WL-500g Q&A
    Replies: 3
    Last Post: 14-03-2004, 10:34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •