[USB] Memory Sticks

[Tamadite]

Tested: NOT WORKING
Reason: It can not be partitioned but with FAT/FAT32 only.
Model: WL-500G
Firmware: 1.9.2.7-7b

Device
Brandname: Micro Memory
Brandtype: Micro Memory
Memory: 512 MB
USB Interface: USB 2.0 compliant
URL To manufacturer/product: http://www.247-help.com

[kubo]

Tested: WORKING
Model: WL-500g Deluxe and WL-500g Premium
Firmware: 1.8.2.1 (WL-500g Deluxe)

Brandname: A-DATA
Brandtype: My Flash
Model: PD4 (Alu Body)
Memory: 1 GB
USB Interface: USB 2.0 (Backward compatible with USB 1.1)
URL of product : http://www.adata.com.tw/adata_en/pro...p?ProductNo=86

[ajj]

Tested@
Model: WL500g.Deluxe
Firmware: 1.9.2.7-7f

Device WORKING
Brandname: Apacer
Brandtype: Handy Steno AH220
Memory: 2GB
USB Interface: High-speed USB 2.0 certified, backwards compatible with USB 1.1
URL To manufacturer: http://www.apacer.com/
URL To product: http://www.apacer.com/en/products/Ha...H220_specs.htm

[taylor729]

Tested: WORKING
Model: WL-500g Premium v2
Firmware: 1.9.2.7-d

Brandname: A-DATA
Brandtype: Classic Series
Model: C801
Memory: 16GB
USB Interface: USB 2.0 (Backward compatible with USB 1.1)
URL of product : http://www.adata.com.tw/en/product_s...ctNo=AC81ZZZWH

[dreamlayers]

Tested: WORKING
Model: WL-500W
Firmware: 1.9.2.7-d-r1222 (from wl500g project at Google Code)

Tested: NOT WORKING
Model: WL-500W
Firmware: 1.9.2.7-10

Device
Brandname: Kingston
Brandtype: Kingston Data Traveler 102 (DT102/16GB)
Memory: 16GB
USB Interface: USB 2.0 compliant
URL To manufacturer: http://www.kingston.com/
URL To product: http://www.kingston.com/flash/dt102.asp

Notes:
Does not work with Oleg's firmware 1.9.2.7-10; there I get "I/O error: dev 08:00, sector 0" and the device is unusable. It works perfectly with WL500W-1.9.2.7-d-r1222. Mke2fs was very slow, but overall performance is fine.

I'm using ext2 instead of ext3 because various sources say the journal writes in ext3 wear out flash more. The firmware doesn't include ext2fs support; the module is found in the modules file which is listed on the firmware download page. I put the module (ext2.o) in flashfs. I load it and mount the filesystem from /tmp/local/sbin/post-boot