Results 1 to 3 of 3

Thread: devolo microlink 56k fun lan (pppoe)

  1. #1

    devolo microlink 56k fun lan (pppoe)

    hello,
    i've got the following problem.
    I connect to my wl500gx, which is home gateway mode, wireless. linked to one of the lan ports is an devolo microlink 56k fun lan modem. the pc connects per dial-up adapter on pppoe to the modem. initializitation and dialing is no problem.

    the problem is, that the whole traffic is not transfered through the wirless adapter but through the wired connection to the router. if i unplug the wired connection from router to pc, the initialization of the modem works, but any other data does not reach the pc.

    i suggest that the router does not route the data from the modem back to the channel opened by the wlan adapter of the pc.

    perhaps i may be able to set up a static route, but i have no clue how to do this especially the interface option is somehow tricky for me.

    my settings :
    wlan adapter : 192.168.1.61
    lan adapter : 192.168.62
    modem does not get any static ip and has no web access.

    thanks for your help.

  2. #2

    more infos

    i've tried to connect through the wlan adapter of the laptop to the modem attached to the wan port of the router. the modem is connected to the isp ans the wlan adapter to the router, but its impossible to reach the internet from the laptop but possible from the lan adapter of the laptop.

    posted beneath is the routing table.

    Destination Gateway Genmask Flags Metric Ref Use Iface
    62.53.134.97 * 255.255.255.255 UH 0 0 0 WAN ppp0
    62.53.134.97 * 255.255.255.255 UH 0 0 0 WAN ppp0
    192.168.1.0 * 255.255.255.0 U 0 0 0 LAN br0
    1.0.0.0 * 255.0.0.0 U 0 0 0 WAN vlan1
    default 62.53.134.97 0.0.0.0 UG 0 0 0 WAN ppp0

    still mac-adresses are associated to fixed ips as mentioned above.
    internett-firewalls disabled, newest firmware of oleg used.

  3. #3

Similar Threads

  1. How to run pppoe and dyndns
    By hugo in forum WL-HDD Q&A
    Replies: 4
    Last Post: 05-01-2007, 22:04
  2. Reboot on ISP disconnects ?
    By 7111 in forum WL-500g Q&A
    Replies: 6
    Last Post: 27-09-2006, 08:18
  3. WL300G blocks PPPOE traffic in 1.9.2.7-7a
    By jacsa in forum WL-300g Custom Development
    Replies: 2
    Last Post: 07-01-2006, 19:28
  4. PPPoE and LAN at the same time
    By wannaplay in forum WL-500g Q&A
    Replies: 5
    Last Post: 26-06-2005, 20:32
  5. WAN port dies - fixing speed
    By Oleg in forum WL-500g Q&A
    Replies: 48
    Last Post: 03-04-2005, 02:19

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •