Results 1 to 3 of 3

Thread: WL300G blocks PPPOE traffic in 1.9.2.7-7a

  1. #1

    WL300G blocks PPPOE traffic in 1.9.2.7-7a

    Hello Oleg,

    my config is:

    Notebook with pppoe client-(wire)-WL300G ....(wireless).... WRT54GL-(wire)-PC with pppoe server.

    WRT54GL is in AP mode, WL300G is in Ethernet Bridge extended mode, ping is ok from notebook to PC.

    When I use 1.8.1.7-2a fw. on WL300G, I can connect to pppoe server, but when I use 1.9.2.7-7a, I can't. telnetting into WL300G tcpdump shows a PADI packet, but no answer.

    Pls help.

    Thanks in advance,
    Jacsa

  2. #2
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    You need to switch wl300g to Access Point mode or enable pppoe relaying if it runs in Home Gateway mode.

  3. #3
    Quote Originally Posted by Oleg
    You need to switch wl300g to Access Point mode or enable pppoe relaying if it runs in Home Gateway mode.
    Unfortunately I can't swap the WRT54G and WL300g, WRT must be as an AP and WL300g-s as clients (I set AP mode to "AP only", and Extended mode to "Ethernet Bridge"). Once again, your 1.8.1.7-3 firmware works well in this configuration and relays the PPPOE frames, but the 1.9.2.7-7a doesn't relay.
    The only two features why I would like to use 1.9.2.7-7a, the SMTP daemon and the working WPA-PSK in AP-client mode.

    Janos

Similar Threads

  1. How to run pppoe and dyndns
    By hugo in forum WL-HDD Q&A
    Replies: 4
    Last Post: 05-01-2007, 22:04
  2. Reboot on ISP disconnects ?
    By 7111 in forum WL-500g Q&A
    Replies: 6
    Last Post: 27-09-2006, 08:18
  3. Traffic shaping script
    By smeto in forum WL-500g Q&A
    Replies: 0
    Last Post: 17-12-2005, 22:46
  4. btget is working but?
    By wilco02 in forum Dutch Discussion - Nederlands
    Replies: 1
    Last Post: 03-12-2005, 19:22
  5. btget(doesn't work perfect)
    By wilco02 in forum WL-500g Q&A
    Replies: 0
    Last Post: 30-10-2005, 15:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •