Firmware v1.9.2.7 CR7 now 7g [Oleg]

[wengi]

Ahhhh...ok.

/usr/local is the same as /tmp/local

Thats why there were no files.
And normaly you do your mounts in post boot.
No post-boot -> no mounts -> big problems

wengi

[lansin]

Ahhhh...ok.

/usr/local is the same as /tmp/local

Thats why there were no files.
And normaly you do your mounts in post boot.
No post-boot -> no mounts -> big problems

wengi

about the problem of 'flashfs save ' is ok now,but i want to install apache ,ftp and mysql in it,how to do it?
TKS!!

[wengi]

use the search function....

mysql first result: http://wl500g.info/showthread.php?t=...ighlight=mysql

[lansin]

when i:
$flashfs save
removing leading '/' from member names
/tmp/local/:unknown file type;file ignoired
error exit delayed from previous errors

how to solve the problem?i want to edit the file post-boot with " vi post-boot"
and then i with the commander "flashfs save" ,it appears some errror,who can help me ?TKS!

[lansin]

i have some trounblt now,can you help me ? i meet trouble as following:

when i:
$flashfs save
removing leading '/' from member names
/tmp/local/:unknown file type;file ignoired
error exit delayed from previous errors
$flashfs commit
$flashfs enable
$reboot

when i do as above,i find the files(post-boot and post-firewall ) are deleted,and the tow files only can edit once,when i edit them secondly,it will appear as above,how to solve the problem?please help me ,
TKS!
__________________

[Adverse]

is there any chance fo a port to the WL-566gM

http://www.asus.com/products.aspx?l1...38&modelmenu=1

it has the same interface and the GPL source code for firmware version 1.0.1.8 is on the asus site

[mangodan]

Hi Oleg,
I have downloaded and patched the Asus 1.9.2.7 to yr 7g revision.
The make and make image-wl550g complete without error, however the resulting .trx file is 2.7MiB vs yr built image of 3.4MiB and mine fails to flash.
I can flash yr version without error.

Any idea what might cause this?

[bord4kop]

Man what good fw!

Finaly installed the Oleg fw.
Should 've done it a long time ago!

Thanks Oleg!

[Booster]

Does anyone have an answer to my questions?

I'm having some trouble with the 7x-branch of the firmware.

I used the 6b-firmware for a long time without any problems. After upgrading to 1.9.2.7-7f, the (external) DHCP (getting an IP from my provider) is very, very slow. It takes over 2 minutes to get an address. The last part of the log looks like this:

Jan 1 01:00:11 kernel: lp driver: get device ID
Jan 1 01:00:11 kernel: neg fail
Jan 1 01:00:11 kernel: neg fail
[... internal clients getting their IP-addresses here, without DNS-info ...]
Jan 1 01:02:23 udhcpc[64]: Lease of x.x.x.x obtained, lease time 522816
Jan 1 01:02:24 dhcp client: bound IP : x.x.x.x from y.y.y.y
Jan 26 20:55:55 ntp client: Synchronizing time with 194.109.22.18 ...

The problem kept re-occurring, even after several resets to default and so on.
After downgrading to 1.9.2.7-6b, the DHCP was fast again.

1.9.2.7-7c gave me the very same problem. What happend to the DHCP between 6b and 7c and how to solve this?

Also, is it normal that DHCP reports 1 'normal' DNS (the first one I typed in), and 2nd DNS as '192.168.0.1' although I manually set 2 DNS in the configuration?

[Stiefel]

Hello Oleg,

I get the following error when trying to use PPTP with MPPE:

"MPPE required, but kernel has no support" ?

I tried firmware 1.9.2.7-g and 7e.
My additional pppd options are: "defaultroute require-mppe"

I thought MPPE is part of the custom firmware kernel since a long time?

I saw a thread having a similar problem - but you continued to talk in russian :-)

Here are the logs from -7e:

--------------------------------
Jan 1 01:02:50 pptp[195]: anon log[mainptp.c:267]: The synchronous pptp option is NOT activated
Jan 1 01:02:50 pppd[90]: Serial connection established.
Jan 1 01:02:50 pppd[90]: Using interface ppp0
Jan 1 01:02:50 pppd[90]: Connect: ppp0 <--> /dev/pts/0
Jan 1 01:02:50 pptp[199]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
Jan 1 01:02:51 pptp[199]: anon log[ctrlp_dispptp_ctrl.c:732]: Received Start Control Connection Reply
Jan 1 01:02:51 pptp[199]: anon log[ctrlp_dispptp_ctrl.c:766]: Client connection established.
Jan 1 01:02:51 pptp[199]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
Jan 1 01:02:52 pptp[199]: anon log[ctrlp_dispptp_ctrl.c:851]: Received Outgoing Call Reply.
Jan 1 01:02:52 pptp[199]: anon log[ctrlp_dispptp_ctrl.c:890]: Outgoing call established (call ID 0, peer's call ID 40832).
Jan 1 01:02:52 pppd[90]: MPPE required, but kernel has no support.
Jan 1 01:02:52 pppd[90]: Connection terminated.
Jan 1 01:02:52 pptp[195]: anon warn[decaps_hdlcptp_gre.c:197]: short read (-1): Input/output error
Jan 1 01:02:52 pptp[195]: anon warn[decaps_hdlcptp_gre.c:209]: pppd may have shutdown, see pppd log
Jan 1 01:02:52 pptp[199]: anon log[callmgr_mainptp_callmgr.c:230]: Closing connection
Jan 1 01:02:52 pptp[199]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'
Jan 1 01:02:52 pppd[90]: Exit.
Jan 1 01:02:52 pptp[199]: anon log[pptp_read_someptp_ctrl.c:537]: read returned zero, peer has closed
Jan 1 01:02:52 pptp[199]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'
Jan 1 01:02:52 pptp[199]: anon log[pptp_conn_closeptp_ctrl.c:433]: Closing PPTP connection
Jan 1 01:02:52 pptp[199]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 3 'Stop-Control-Connection-Request'
Jan 1 01:02:52 pptp[199]: anon log[pptp_read_someptp_ctrl.c:537]: read returned zero, peer has closed
Jan 1 01:02:54 pptp[199]: anon log[call_callbackptp_callmgr.c:77]: Closing connection

----------------------------------

Anyway, great work, i am using your firmware since a long time!

Bests,

Stefan

[SeTAr]

Hi!

Could anyone confirm a bug with WL500g deluxe and oleg firmware?
If I set my WAN IP as 84.255.254.x the wireless connection becomes very unstable (wired computers work without problems) - the problem seems to be in the 255 part of the ip.
I have reproduced the bug on two WL500g deluxes one with 1.9.2.7 CR7f and one with 1.9.2.7 CR7g oleg firmware.

The procedure I used to reproduce the bug:
- disconnect wan, leave only 1 wired pc connected
- reset the router
- go to IP Config -> WAN & LAN
- Wan connection type choose Static IP
- IP Address enter 84.255.254.1
- Netmask enter 255.255.192.0
- Click finish
- after the router finishes rebooting you can see the default wireless network with your laptop
- if you try to connect to the network you get an error and the network disappears from scans
- wired computer works as normal
- if you leave it like that for a while (few hours) it comes to its senses and you can connect wirelessly, and it works as normal
- after some time (a few hours) the wireless connection dies again



The weird ip range is from a slovenian isp that offers a 10/10 ftth connection for 14eur so I really need this to work

[wiz]

hmmz, it is a valid ip address, so I cannot see that this is the problem.

Do you set the wan connection to auto negotiate or have you set it manually? if it is set to auto negotiate, try setting it to 10 mbps/full or half manually and see if that helps?

[LincolnB]

is there any chance fo a port to the WL-566gM

http://www.asus.com/products.aspx?l1...38&modelmenu=1

it has the same interface and the GPL source code for firmware version 1.0.1.8 is on the asus site

I have the same request; it would be very nice if there could be made a port for the WL-566gM.

[MMCM]

I have the same request; it would be very nice if there could be made a port for the WL-566gM.

The WL-566gM has a different CPU, and a different Wifi chipset.
see: http://wiki.openwrt.org/TableOfHardware

[Adverse]

WL-520gC
http://au.asus.com/products.aspx?l1=...72&modelmenu=1

this unit looks like it has a smiler firmware any chance for a port to it as you carnt buy the WL-500g and the WL-550ge are no longer sold in Australia