This is ASUS QoS (bandwidth management) stuff. Nothing is changed in this part. Perhaps you've changed something in the config.Originally Posted by alien433
i upgrade to 1927-7c and this fault i get in the logfile:
Mar 8 15:20:59 kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Mar 8 15:21:00 kernel: HTB: quantum of class 10015 is small. Consider r2q change.
Mar 8 15:21:00 kernel: HTB: quantum of class 10016 is small. Consider r2q change.
Mar 8 15:21:00 kernel: HTB: quantum of class 10018 is big. Consider r2q change.
Mar 8 15:21:01 kernel: HTB init, kernel part version 3.16
Mar 8 15:21:01 kernel: HTB: quantum of class 10001 is big. Consider r2q change.
i have the wl 500g, and of cause i did the wl500g update
This is ASUS QoS (bandwidth management) stuff. Nothing is changed in this part. Perhaps you've changed something in the config.Originally Posted by alien433
Hi Oleg,
I downloaded -7c and got the following error ???
Could you please take a quick look ??patching file www/asus/mkweb
[ ! -d /usr/src/WL-HDD/broadcom/src/router/rt2460 ] || [ -d /usr/src/WL-HDD/broadcom/src/gateway/rt2460 ] || \
tar -C /usr/src/WL-HDD/broadcom/src/router -cf - rt2460 | tar -C /usr/src/WL-HDD/broadcom/src/gateway -xf -
[ ! -f rt2460.diff ] || patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 --no-backup-if-mismatch < rt2460.diff
[ ! -d /usr/src/WL-HDD/broadcom/src/router/et.SENTRY5 ] || [ -d /usr/src/WL-HDD/broadcom/src/gateway/et.SENTRY5 ] || \
tar -C /usr/src/WL-HDD/broadcom/src/router -cf - et.SENTRY5 | tar -C /usr/src/WL-HDD/broadcom/src/gateway -xf -
[ ! -f et.SENTRY5.diff ] || patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 --no-backup-if-mismatch < et.SENTRY5.diff
[ ! -d /usr/src/WL-HDD/broadcom/src/router/libcrypto ] || [ -d /usr/src/WL-HDD/broadcom/src/gateway/libcrypto ] || \
tar -C /usr/src/WL-HDD/broadcom/src/router -cf - libcrypto | tar -C /usr/src/WL-HDD/broadcom/src/gateway -xf -
[ ! -f libcrypto.diff ] || patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 --no-backup-if-mismatch < libcrypto.diff
patching file libcrypto/Makefile
[ -f /usr/src/WL-HDD/broadcom/src/gateway/Makefile ] || cp /usr/src/WL-HDD/broadcom/src/router/Makefile /usr/src/WL-HDD/broadcom/src/gateway && patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 < Makefile.diff
patching file Makefile
[ -f /usr/src/WL-HDD/broadcom/src/gateway/Makefiles5.mk ] || cp /usr/src/WL-HDD/broadcom/src/router/Makefiles5.* /usr/src/WL-HDD/broadcom/src/gateway && patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 < Makefiles5.diff
patching file Makefiles5.mk
make -C /usr/src/WL-HDD/broadcom/src/gateway .config
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway'
Makefile:15: .config: No such file or directory
cp config/defconfig .config
make oldconfig
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway'
make -C config
make[3]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/config'
cp zconf.tab.h_shipped zconf.tab.h
gcc -I. -c conf.c -o conf.o
cp zconf.tab.c_shipped zconf.tab.c
cp lex.zconf.c_shipped lex.zconf.c
gcc -I. -c zconf.tab.c -o zconf.tab.o
gcc conf.o zconf.tab.o -o conf
gcc -I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>" -I. -c mconf.c -o mconf.o
mconf.c:93: error: static declaration of ‘current_menu’ follows non-static declaration
lkc.h:59: error: previous declaration of ‘current_menu’ was here
mconf.c: In function ‘conf_string’:
mconf.c:537: warning: pointer targets in passing argument 2 of ‘sym_set_string_value’ differ in signedness
mconf.c: In function ‘conf_load’:
mconf.c:558: warning: pointer targets in passing argument 1 of ‘conf_read’ differ in signedness
mconf.c: In function ‘conf_save’:
mconf.c:579: warning: pointer targets in passing argument 1 of ‘conf_write’ differ in signedness
make[3]: *** [mconf.o] Error 1
make[3]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/config'
make[2]: *** [oldconf] Error 2
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway'
make[1]: *** [.config] Error 2
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway'
make: *** [custom] Error 2
./mkall: line 18: cd: pwd/broadcom/src/gateway: No such file or directory
tar xjf loader-0.04.tar.bz2 -C /usr/src/WL-HDD/broadcom/src/gateway
mv /usr/src/WL-HDD/broadcom/src/gateway/loader-0.04 /usr/src/WL-HDD/broadcom/src/gateway/loader
tar xjf busybox-1.01.tar.bz2 -C /usr/src/WL-HDD/broadcom/src/gateway
patch -d /usr/src/WL-HDD/broadcom/src/gateway/busybox-1.01 -p1 < busybox-1.01.patch
patching file include/applets.h
patching file include/usage.h
patching file shell/ash.c
Hunk #1 succeeded at 1526 (offset 1 line).
patching file sysklogd/syslogd.c
patching file editors/awk.c
Hunk #4 succeeded at 1871 (offset -1 lines).
Hunk #5 succeeded at 2020 (offset -1 lines).
patching file networking/udhcp/packet.c
patching file networking/udhcp/socket.c
patch -d /usr/src/WL-HDD/broadcom/src/gateway/busybox-1.01 -p1 < busybox-1.01-applets.diff
patching file coreutils/Config.in
patching file coreutils/Makefile.in
patching file coreutils/nice.c
patching file coreutils/nohup.c
patching file include/applets.h
Hunk #1 succeeded at 187 (offset 3 lines).
patching file include/usage.h
patching file networking/Config.in
patching file networking/ether-wake.c
patching file networking/Makefile.in
cp busybox-1.01.config /usr/src/WL-HDD/broadcom/src/gateway/busybox-1.01/sysdeps/linux/defconfig
mv /usr/src/WL-HDD/broadcom/src/gateway/busybox-1.01 /usr/src/WL-HDD/broadcom/src/gateway/busybox
cd /usr/src/WL-HDD/broadcom/src/gateway/ppp && ./configure --prefix=/usr --sysconfdir=/tmp
Configuring for Linux
Creating links to Makefiles.
Makefile -> linux/Makefile.top
linux/Makedefs -> Makedefs.com
pppd/Makefile -> Makefile.linux
pppstats/Makefile -> Makefile.linux
chat/Makefile -> Makefile.linux
pppdump/Makefile -> Makefile.linux
pppd/plugins/Makefile -> Makefile.linux
pppd/plugins/rp-pppoe/Makefile -> Makefile.linux
pppd/plugins/radius/Makefile -> Makefile.linux
patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 < nas.diff
The next patch would create the file nas/Makefile,
which already exists! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file nas/Makefile.rej
make: *** [nas] Error 1
[ ! -d /usr/src/WL-HDD/broadcom/src/router/image-WLHDD ] || [ -d /usr/src/WL-HDD/broadcom/src/gateway/image-WLHDD ] || \
tar -C /usr/src/WL-HDD/broadcom/src/router -cf - image-WLHDD | tar -C /usr/src/WL-HDD/broadcom/src/gateway -xf -
[ ! -f image-WLHDD.diff ] || patch -d /usr/src/WL-HDD/broadcom/src/gateway -p1 --no-backup-if-mismatch < image-WLHDD.diff
I downloaded hndtools-mipsel-uclibc-3.2.3-full.tar.bz2 instaled everything under /opt
So there is a dir
/opt/brcm/hndtools-mipsel/uclibc-3.2.3-full
a link from there to
/opt/brcm/hndtools-mipsel/uclibc
did a
export PATH=$PATH:/opt/brcm/hndtools-mipsel-linux/bin:/opt/brcm/hndtools-mipsel-uclibc/bin
tar -xzvf GPL_1927.tgz
tar -C broadcom/src/ -xjvf wl500g-1.9.2.7-7c.tar.bz2
cd broadcom/src/wl500g-1.9.2.7-7c
make uClibc
make kernel
make
cd ~/broadcom/src/gateway
make
and got the output above
I'm using SuSE 10 ??
Any hints
thanks for your help in advanced
ankn99
P.S.: I did it the same way at a SuSE 9.3 with wl500g-1.9.2.7-5*
it always worked perfectly but I destroyed my old SuSE and using the new one !!
Last edited by ankn99; 08-03-2006 at 19:42.
Greetings from 1XXXX (Berlin/Germany)
Ooops, I wrote a scipt to do this automagicly and mybe made a mistake waite a few minutes I found my error!!
Greetings from 1XXXX (Berlin/Germany)
OK, I'm passed this point, know what kind of mistake I did, but I just saw it as soon as I postet the log of my Makes and edit thes one again !!
OK, done now it stops at
Any hint what this could be ??
[ ! -d libcrypto ] || make -C libcrypto
find: /usr/src/WL-HDD/broadcom/src/gateway/mipsel-uclibc/target: No such file or directory
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/libcrypto'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/libcrypto'
make -C iptables BINDIR=/usr/sbin LIBDIR=/usr/lib KERNEL_DIR=/usr/src/WL-HDD/broadcom/src/linux/linux
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/iptables'
make[1]: Nothing to be done for `default'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/iptables'
[ ! -d netconf ] || make -C netconf
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/netconf'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/netconf'
[ ! -d shared ] || make -C shared
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/shared'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/shared'
[ ! -d nvram ] || make -C nvram
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/nvram'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/nvram'
[ ! -d httpd ] || make -C httpd
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/httpd'
mipsel-uclibc-strip httpd
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/httpd'
[ ! -d rc ] || make -C rc
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/rc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/rc'
make -C www/asus INSTALLDIR=/usr/src/WL-HDD/broadcom/src/gateway/mipsel-uclibc/install/www
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/www/asus'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/www/asus'
[ ! -d lib ] || make -C lib
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/lib'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/lib'
[ ! -d wlconf ] || make -C wlconf
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/wlconf'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/wlconf'
make -C bridge brctl/brctl
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/bridge'
make[1]: `brctl/brctl' is up to date.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/bridge'
make -C busybox all STRIP=mipsel-uclibc-strip
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/busybox'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/busybox'
make -C dnsmasq CFLAGS="-Os -DNO_IPV6"
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/dnsmasq'
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/dnsmasq/src'
make[2]: `dnsmasq' is up to date.
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/dnsmasq/src'
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/dnsmasq'
[ ! -d nas ] || make -C nas
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/nas'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/nas'
[ ! -d ntpclient ] || make -C ntpclient
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ntpclient'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ntpclient'
[ ! -d ppp ] || make -C ppp
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp'
cd chat; make -w all
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/chat'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/chat'
cd pppd/plugins; make -w all
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd/plugins'
for d in rp-pppoe; do make -w -C $d all; done
make[3]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd/plugins/rp-pppoe'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd/plugins/rp-pppoe'
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd/plugins'
cd pppd; make -w all
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppd'
cd pppstats; make -w all
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppstats'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppstats'
cd pppdump; make -w all
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppdump'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp/pppdump'
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/ppp'
[ ! -d upnp ] || make -C upnp
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp'
make -C igd/linux DEBUG= SRCBASE=/usr/src/WL-HDD/broadcom/src TOP=/usr/src/WL-HDD/broadcom/src/gateway TARGET_PREFIX=mipsel-uclibc-
make[2]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp/igd/linux'
make -C ../../upnp/linux DEBUG= PLATFORM=x86 CC=mipsel-uclibc-gcc LD=mipsel-uclibc-ld VENDOR=
make[3]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp/upnp/linux'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp/upnp/linux'
make[2]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp/igd/linux'
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/upnp'
[ ! -d utils ] || make -C utils
make[1]: Entering directory `/usr/src/WL-HDD/broadcom/src/gateway/utils'
make[1]: *** No rule to make target `wl', needed by `all'. Stop.
make[1]: Leaving directory `/usr/src/WL-HDD/broadcom/src/gateway/utils'
make: *** [utils] Error 2
Greetings from 1XXXX (Berlin/Germany)
As far as i understand, this feature is only for the WL-HDD, not for external USB drives.
Can anybody confirm this?
not realy, it's the closed source wireless Part from Broadcom !!!Originally Posted by MatB
Anyway, I'm just giving OpenWRT a try, since the people over there started to build a WEB-Interface !!!
As far as I can see it doesn't look bad, if I can get some own stuff comiled for it, I think I'll ride this road ;-)
Greetings from 1XXXX (Berlin/Germany)
some Users in the German forum report that dyndns is not working with 7c Firmware.
Got someone the same problem?
Originally Posted by Elron
Its working for me
I "just" had to power cycle the router, reboot will not do. Then my usb stick got detected automatic.Originally Posted by florin_m
Tried the -7c fw. But got problems with my IP-phone. When answering calls the caller could often not hear me at all - and hung up. Flashed backed to 1.9.5.0, all OK.
Did not change any settings in the process, and also verified that all necessary ports where open to the IP-phone.
Hello
Thanks for your good work Oleg.
However 1.9.2.7s seems to have the same bug that early 1.9.2.6s : FTP is not working under PPPoE. You called the patch "pppoe/pptp mss clamping".
Hello
Thank's for this very good firmware Oleg , i have trouble with the latest samba not working...
any idea ?
Hi first of all i must say you are doing great job Oleg.
Here is my problem: I connected my 100 Gb USB Hdd to wl500g and using ftp server on it. When i set up user accounts in web interface it doesnt seem to work, only superuser is able to connect to ftp when anonymous access is disabled. But superuser is not able to write or delete anything from the hdd, where i was able to copy files using only usb stick instead of hdd.
Thanks Milan
NTFS formatted?Originally Posted by buckiboy