Firmware v1.7.5.6 CR3 [Oleg]

[fraho]

thanks for your warnings oleg, but could you please explain anyway how to send a wakeup-packet via internet to a pc behind the wl500g??

[Oleg]

Use ssh client to connect to wl500g, then type

ether-wake -i br0 00:11:22:33:44:55

Replace 00:11:22:33:44:55 with your PC MAC address.

[fraho]

ähm, I tried to ssh my router with putty (from wan-side) but get a network timeout. How do I have to configure putty to get it work?

[Oleg]

Have you enabled ssh on the wl500g?

[fraho]

Have you enabled ssh on the wl500g?

No, I thought that comes as default with your customized firmware. How can I enable ssh?

[Oleg]

Read this page or this thread

[mr_prof]

Hi !


Oleg, I don't know how to use WinSCP3 with SSH. I read http://wl500g.dyndns.org/ , and folow step-by-step this:
"Dropbear ssh daemon (password only auth, ssh v2) In order to use ssh you will need to perform this steps once:
1. Connect to router using telnet;
2. Generate the DSS key using
/init/rc.sshd
3. If generation was successfull you will need to add /init/rc.sshd to bootCmds using something like
nvram set bootCmdX=/init/rc.sshd
4. Commit the changes using
nvram commit
5. Reboot the router using
reboot"

connect to router with WinSCP3 doesn't work.


2: Sorry, my english is poor, and maybe my last question wasn't clear for you.

I don't understand, what is a PPPOE relay in ASUS ???? Can I create different PPPOE session from pc via router ??? How it work ???


3. Lot of thanks for WOL


Tibor

[fabiosantos]

Duddes, you guys are so so so so off-topic, Antiloop can't you move it ?

[fraho]

Read this page or this thread

o.k., It works now within my LAN but unfortunately not from WAN Side (putty gives me a network timeout) As I am behind a firewall with a maybe closed port 22 I tried the tunnel-option within putty but I'm not sure how to configure that. Can anybody help me with that?

[Oleg]

Read the the first post in current thread entirely. It contains all info regarding how to enable ssh access from the WAN.

[mkol5222]

Does anyone have mentioned code? ;-) Oce's machine is not online. Would you attach here, please?

Please, don't hammer, but feel free to try and copy the code (ripped from the router): http://oce.homeip.net/external.html (might take a while to load the 'Bunny Online TM'-webcam' though.

[oCe]

Does anyone have mentioned code? ;-) Oce's machine is not online. Would you attach here, please?

code had been replaced to http://members.home.nl/oce/bunnycam

the active-x and the html are both there (you can do dir-listing), have fun!


oh, my machine sure is online though, just as my wl-500g