wl500g dead, dead, dead... Or not ?

[Pandabeer]

Can somebody help we...who can help me to restore de NVRAM (HW version 1.0)

See also

http://wl500g.info/showthread.php?p=5356#post5356

[Antiloop]

no posting in howto!!!

read your Private messages please, I've offered you an option there a while ago

[Pandabeer]

Sorry, I didn't know that there was a way for private messaging..Antiloop please check your inbox, thanks for your offer....Hopefully you can help me...

[recker]

hi

wonder if any one can help. I was playing with nvram and like muppet newbi that I am did a typo and now my router doesent work.

switch it on and there is now power light, it only works as switch. tried the reset and have been looking around in this forum but still not able to get it back to life. cant seem to find anything on the net ether. in brife there is

no power light
not able to ping it on 192.168.1.1
asus firmware restoration dosent find it
but works as a switch

thanks
the recker

[Oleg]

If it's still under warranty - replace it. It still probably could be bringed back to life, but this will void your warranty (you will need to open the box).
So, what you've changed in the nvram exactly?

[recker]

was trying enabling the extra 16 mb of ram think I mist typed something, my falt for not double checking things.

a little knowledge is very dangeros



thanks

[Stevio]

Well yesterdat i had no powerlight too, but after an hour , i put the power-connector in the router and it suddenly got powered, but i think u already tried that

[Hoorna]

@Oleg

Yesterday I bought an ASUS 500g deluxe. Because the serial number starts with 4c I decided to upgrade unit bootloader. I followed your instructions on this forum step by step and it everything went ok. The process goes exactly as you describe ending with resetting the unit to defaults. After that I upgraded the firmware to 1.9.3.5 beta.

When I was ready with these procedures I putted the unit in AP-mode; my ADSL-modem is acting as DHCP-server. Unfortunately I had now a problem which there was not before. In AP-mode the WAN port is dead (however the LED is burning). It doesn't matter if I instruct the unit to get an IP-address from the DHCP-server or if I give the unit an appropriate static IP-address. Downgrading the unit to firmware 1.8.2.1 doesn't help; the problem persists.
In Home Gateway mode the WAN port not dead. The WAN port is than working normally.

What should I do now. If I put the cable of my ADSL-modem in an LAN port everything is working fine. But when doing that I loses one LAN port which I need for another PC; in that case I have one LAN-port to short.

Oleg, can you help me out?

[Oleg]

Added this to Known Bugs Section.
I believe this should be fixed by ASUS in the firmware.

I will also try to fix this in the custom firmware.

[heinz57g]

have just taken 3 hrs to read thru this forum, and now my head feels just like my WL-500g: DEAD.

upgraded from 1.8.1.9 to 1.9.2.7, worked fine but WLAN a bit slow. dealer said to upgrade to 1.9.3.6 (beta but from ASUS website), and that apperently killed the unit. no access the normal way, and even the recovery tool (firmware restoration) comes back with either no unit found, or starts to update for a second or two, then FAILED, CHECK CONNECTION (wired !).

i think i have tried all i could find, but there are so many ifs and buts in the mssgs here in the forum that at the end i know less than intitially. all versions of pressing reset and turning on, trying the CLEAR-NVRAM version, the IP adresses given (where in XP to enter anyhow?), and whatever.

does anybody here have some kind of summary, some kind of steps a simple user like me can follow, step by step, without going thru a million websites that to me seem to make it only more confusing, most of then telling different stories anyhow?

i have used the SEARCH function, i have read thru everything i could, but ... the blasted thing still plays dead.

and i am supposed to have it installed by monday ...

greetings - heinz -

[tomilius]

Network Connections > Local Area Connection > Right-click > Properties > Internet Protocol > Properties

[heinz57g]

tomilius, thats where i thought it was, and where i had entered it, but no difference in the results: none.

on the ping i now get TIME LIMIT EXEEDED

greetings - heinz -

[tomilius]

Come to think of it, I had this same problem. Leave your router unplugged for an extended period of time for it to cool off. Try... an hour. If that doesn't help, leave it unplugged overnight.

I put my router in the freezer once for about 3 minutes. Couldn't hurt, I suppose.

[Namu]

Before my vacation I flashed my 500g to v1.9.2.7 CR6b and everything worked without any problems...

I went on vacation for two weeks and I got home yesterday hopin to pop in my laptop and do some catching up... but that was a nono...

My entire router was deadish... Wan dead, Wireless dead... Only thing that was working was dhcp.

I've hard reset it and re-entered all my settings. Everything on the router is working again except my wireless. I've tried everything I’ve learned about this piece of equipment in the last six months but nothing's working.

Tried changing channels, multiple hard resets and re-entering the settings. Hell, at the moment I’m trying the basic, standard settings that come with wireless after a reboot but that won't work either... I'm running out of idea's fast and I can use all the help I can get.

[joossie]

I had that problem too.
Try to change your WAN and/or LAN cables (get some new cables), that was my problem (I had a wrong WAN-cable, everything worked, but with that cable wireless didn't work).