[uPnP] Problem with uPnP, adding forward: router stops forwarding

[Antiloop]

hmm.. weird log after updating:

Jan 1 01:00:22 dhcp client: deconfig: lease is lost
Jan 1 01:00:22 alarm: UDP connection access to xxx.xxx.xxx.xxx:68 from 213.46.108.65:67
Jan 1 01:00:22 alarm: UDP connection access to xxx.xxx.xxx.xxx:68 from 213.46.108.65:67
Jan 1 01:00:25 dhcp client: bound IP address xxx.xxx.xxx.xxx from server 212.142.28.181
Jan 1 01:00:25 alarm: TCP connection access to xxx.xxx.xxx.xxx:1413 from 217.67.235.13:110
Apr 27 20:16:00 FTP server: daemon is started
Apr 27 20:16:01 alarm: TCP connection access to xxx.xxx.xxx.xxx:113 from 217.67.235.13:45758
Apr 27 20:16:02 alarm: TCP connection access to xxx.xxx.xxx.xxx:1413 from 217.67.235.13:110
Apr 27 20:16:02 init: device '/dev/tty4' does not exist.
Apr 27 20:16:02 init: device '/dev/tty3' does not exist.
Apr 27 20:16:02 init: device '/dev/tty2' does not exist.
Apr 27 20:16:02 init: Process '-/bin/sh' (pid 849) exited. Scheduling it for restart.
Apr 27 20:16:03 init: Process '-/bin/sh' (pid 848) exited. Scheduling it for restart.
Apr 27 20:16:04 alarm: TCP connection access to xxx.xxx.xxx.xxx:113 from 217.67.235.13:45758
Apr 27 20:16:04 init: Process '-/bin/sh' (pid 865) exited. Scheduling it for restart.
Apr 27 20:16:04 init: device '/dev/tty2' does not exist.
Apr 27 20:16:05 init: Process '-/bin/sh' (pid 866) exited. Scheduling it for restart.
Apr 27 20:16:06 init: Process '-/bin/sh' (pid 867) exited. Scheduling it for restart.
Apr 27 20:16:06 init: device '/dev/tty2' does not exist.
Apr 27 20:16:07 NTP client: time is synchronized to 131.107.1.10
Apr 27 20:16:07 init: Process '-/bin/sh' (pid 876) exited. Scheduling it for restart.
Apr 27 20:16:08 init: Process '-/bin/sh' (pid 884) exited. Scheduling it for restart.
Apr 27 20:16:08 init: device '/dev/tty2' does not exist.
Apr 27 20:16:09 init: Process '-/bin/sh' (pid 885) exited. Scheduling it for restart.
Apr 27 20:16:10 alarm: TCP connection access to xxx.xxx.xxx.xxx:113 from 217.67.235.13:45758
Apr 27 20:16:10 init: Process '-/bin/sh' (pid 886) exited. Scheduling it for restart.
Apr 27 20:16:10 init: device '/dev/tty2' does not exist.
Apr 27 20:16:12 init: Process '-/bin/sh' (pid 911) exited. Scheduling it for restart.
Apr 27 20:16:13 alarm: TCP connection access to xxx.xxx.xxx.xxx:1376 from 207.46.107.68:1863
Apr 27 20:16:13 alarm: TCP connection access to xxx.xxx.xxx.xxx:1376 from 207.46.107.68:1863
Apr 27 20:16:13 init: Process '-/bin/sh' (pid 891) exited. Scheduling it for restart.
Apr 27 20:16:14 alarm: TCP connection access to xxx.xxx.xxx.xxx:1376 from 207.46.107.68:1863
Apr 27 20:16:15 init: Process '-/bin/sh' (pid 922) exited. Scheduling it for restart.
Apr 27 20:16:15 init: device '/dev/tty2' does not exist.
Apr 27 20:16:16 init: Process '-/bin/sh' (pid 923) exited. Scheduling it for restart.
Apr 27 20:16:16 alarm: TCP connection access to xxx.xxx.xxx.xxx:1376 from 207.46.107.68:1863


and so on..

[Antiloop]

find firmware 1.7.5.7 beta below to download.

http://files.wl500g.info/asus/wl500g...7.5.7-beta.zip

TRY THIS ONLY AT YOUR RISK.

i don't know if uPnP behaves always like this,
see attached.. routers stays alive

i've choosen port 81 because when i fill in port 80 i can't access internet pages anymore (i get my printer page instead)

[Antiloop]

oh and last but not least, i cannot access port 81 (or 80) from WAN

(note i'm not doing this local as I have 2 Internet connections available)

AARGH.. that line was dead.. have to test over :P

[rej]

What does that specific entry say on the Status & Log -> Port Forwarding Page?

BR,
René

[rej]

OK, I guess you cannot see that for entries to port 80, since this may block all web traffic including traffic to the router page. But can you make an entry with a port forward of e.g. port 5000 to one of your local PC's and check out the entry on the Status & Log -> Port Forwarding page on the router?

Thanks,
René

[copycat]

Any interesting new stuff in the beta driver?

[Antiloop]

Destination Prot. Port Range Redirect to
212.86.124.11 tcp 8082 192.168.0.1:80
212.86.124.11 tcp 8082 192.168.0.1:80
212.86.124.11 tcp 3389 192.168.0.254
anywhere tcp 81 192.168.0.100:80
anywhere tcp 11977 192.168.0.3:2437

ok.. i can access port 81 from my other internet connection (be sure it's up when testing )

ok.. everything went well, router is still functioning normal

the only disadvantage there is I think, is that it assigns ANYWHERE to it..
it should not be necessary, because an entry just like the other 3 (1 virtual server, the other 2(?) are for my WAN setup) would be fine
then it would not cause that websites aren't reachable when you add port 80 via uPnP..

tell me your thougths soon please, for a fast reply I have to mail in the morning to Asus then they are still at work.

note: the IP shown is not my real ip.

[Antiloop]

Any interesting new stuff in the beta driver?

hehe you would not believe what's in (pointing to Oleg)
but they are using some parts of CR2

nice to see they are 'learning' and adding good improvements to the standard firmware for the normal users