Hi, I have problems with PATH setting on my router when using the Plink programme.
I have Mercurial on the router and I access it via SSH from my PC using the TortoiseHg that uses Plink.
Any attment to connect with the server ends up with following failure notice:
sh: hg: not found

I have found out that this is due to incorrect setting of PATH to programmes istalled in /opt when accessing via Plink.

When logged in via Putty, the path is:
When I use Plink without entering any command to run, I stay logged in and the PATH record is the same as the one mentioned above:

c:\Program Files (x86)>plink -ssh -2 n16
login as: root
[root@n16 root]$ echo $PATH
[root@badboy root]$
When I use Plink and enter a command to run, the path setting is not correct.

c:\Program Files (x86)>plink -ssh -2 n16 echo $PATH
login as: root

c:\Program Files (x86)>
PATH is set in /etc/profile

# /etc/profile
export PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
export PS1="[\u@\h \W]\$ "
[ -x /usr/local/etc/profile ] && . /usr/local/etc/profile
[ -x /opt/etc/profile ] && . /opt/etc/profile
and /opt/etc/profile

export PATH=$PATH:/opt/scripts
Any ideas on what the problem might be? I have searched various forums, with no results so far.

On WL-500W with Oleg FW i had no problem.

My current configuration is Asus RT-N16 + FW RT-N16- + Entware.

Thanks a lot.