Results 1 to 3 of 3

Thread: Oleg firmware - how to setup DHCP forwarder?

  1. #1

    Oleg firmware - how to setup DHCP forwarder?

    Hi All,
    I am using the Oleg's based custom firmware (RT-N16-1.9.2.7-rtn-r4667.trx from 2012.10.08).
    I could not find on the GUI setup an option to set the router as DHCP forwarder. Is it possible to set up the router as a DHCP forwarder (as I want another router in my network to be the DHCP server)? If yes, how can I do that?
    Thanks in advance!

  2. #2
    what is DHCP forwarding? just disable DHCP server or set the RT-N16 in Access Point mode and all the dhcp packages were routed as they were on any dumb switch
    RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
    pyload 0.4.9
    minidlna 1.1.2
    samba 3.6.5
    openvpn 2.3.10
    ̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired

  3. #3
    Quote Originally Posted by !gm View Post
    what is DHCP forwarding? just disable DHCP server or set the RT-N16 in Access Point mode and all the dhcp packages were routed as they were on any dumb switch
    Thanks I just had some time to deal with this. I put the RTN16 into access point mode at SystemSetup-OperationMode. Then, at the IpConfig-Lan I set the ip settings for RTN16 and the Default Gateway and DNS server as my other router (which is the DHCP).
    I dont remember what I did previously but I think I just disabled DHCP and it did not work, but maybe I set something wrong...Anyways with this change in operation mode it works. Thanks!

Similar Threads

  1. New oleg firmware version
    By Lesiuk in forum WL-500gP Firmware Discussion
    Replies: 713
    Last Post: 13-05-2016, 05:55
  2. RT-N10U B is supported by oleg firmware?
    By Jeony in forum English Discussion
    Replies: 7
    Last Post: 10-05-2013, 08:44
  3. Oleg firmware - older version
    By kvr in forum WL-500gP Firmware Discussion
    Replies: 0
    Last Post: 17-04-2012, 20:04
  4. Flashing Oleg's Firmware in WL HDD
    By hugo in forum WL-HDD Custom Development
    Replies: 29
    Last Post: 21-10-2004, 15:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •