ASUS RT-N66U Dual Band Gigabit Router Preview (Final Retail Revision)
http://www.smallnetbuilder.com/wirel...eviewed-part-1Hardware Features
Chipset - Broadcom BCM4706 (600 MHz) MIPS32® 74K Core
Memory - 256 MB RAM / 32 MB Flash (+ MicroSD slot for upgrading)
Flash Memory
• Support for both Serial Flash (up to 32 MB)Additional Peripheral Interfaces
• and Parallel Flash (up to 256 MB)
• Both NOR and NAND types
• UART, I2C, SPI, MDIO, JTAG, GPIOWAN - 1x Gigabit Ethernet or 3G/4G USB flash drive & 4x LAN - Gigabit Ethernet
• USB 2.0 Host Port with on-chip PHY
USB port - 2x USB2.0 USB port for external hard drive, printer, 3G/4G stick supports up to 3A
Antenna - 3x3 External & internal antennas for 2.4 G & 5GHz
Switch - On/Off, Reset and WPS
Dimensions - 350 x 270 x 150 mm
Power Adatper:
• ASUS EXA1004UHCable Out: Non-Shielded, 2.5m, one ferrite core bonded.
• I/P : AC 100-240V, 50-60Hz 1A
• O/P : +19V 1.58A
MicroSD (SDHC 8GB) slot for memory expansion
MicroSD
http://www.hardwareluxx.de/community...31-post14.htmlСлот MicroSD поддерживает карты SDHC до 8GB. Следует отметить, что устройство должно быть открыто.
Что касается скорости передачи данных через USB HDD, я получаю следующую информацию:
Samba Download = 11,9 MB/s
Samba Upload = 11,6 MB/s
FTP Download = 12,6 MB/s
FTP Upload = 15,1 MB/s
*NTFS HDD
http://www.techinfodepot.info/index....us_RT-N66U_vB1After sticking in a 2GB MicroSD card and rebooting, the card is seen and mounted to /tmp/mnt/sda1Code:sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman
Contents can be shared via samba in OEM firmware, now to figure out how to run custom scripts from the oem firmware.Code:#df -h Filesystem Size Used Available Use% Mounted on /dev/root 17.0M 17.0M 0 100% / tmpfs 124.8M 412.0K 124.4M 0% /tmp devfs 124.8M 0 124.8M 0% /dev /dev/sda1 1.9G 24.0K 1.9G 0% /tmp/mnt/sda1
http://infodepot.wikia.com/wiki/Asus_RT-N66U