[Announce] New EntWare package repository for 1.9.2.7-rtn firmware

[!gm]

[CODE]...
or mipsel-uclibc-gcc

/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc: cannot execute binary file

hm, what should I do? I checked the link and the executable - it was right

[ryzhov_al]

Try to add /opt/brcm/hndtools-mipsel-uclibc/bin to PATH variable on your virtual machine:

$ export PATH=$PATH:/opt/brcm/hndtools-mipsel-uclibc/bin

[!gm]

after the export it's still the same...

could this be a problem?

checking build system type... i486-pc-linux-gnu

as I'm running a i686 Debian..

[!gm]

ok, now double-checked... and using Ubuntu 11.10
hndtools-mipsel-uclibc-4.4.6-K26-r3458.tar.bz2 != hndtools-mipsel-uclibc-4.4.6-K26-x86_64-r3458.tar.bz2

^ I'm using 32-Bit vm...

switched toolchain, but cyassl still won't compile:

config.log

/opt/brcm/hndtools-mipsel-uclibc/lib/libc.so: undefined reference to `_dl_app_init_array'
/opt/brcm/hndtools-mipsel-uclibc/lib/libc.so: undefined reference to `__tls_get_addr'
/opt/brcm/hndtools-mipsel-uclibc/lib/libc.so: undefined reference to `_dl_loaded_modules'
/opt/brcm/hndtools-mipsel-uclibc/lib/libc.so: undefined reference to `_dl_app_fini_array'
collect2: ld returned 1 exit status

[ryzhov_al]

If you changed toolchain, then better start compilation from very first step. Delete ./trunk directory and start again.

[!gm]

that's what I did

[ryzhov_al]

that's what I did

It seems toolchain is still broken. You may check it by compiling firmware.

[!gm]

... compiling firmware.

compiling stops at busybox

/opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../../../../mipsel-linux-uclibc/bin/ld: warning: ld-uClibc.so.0, needed by /opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../../../../mipsel-linux-uclibc/lib/libc.so, not found (try using -rpath or -rpath-link)
/opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../..//../../mipsel-linux-uclibc/lib/libc.so: undefined reference to `_dl_app_init_array'
/opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../../ ../../mipsel-linux-uclibc/lib/libc.so: undefined reference to `__tls_get_addr'
/opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../../ ../../mipsel-linux-uclibc/lib/libc.so: undefined reference to `_dl_loaded_modules'
/opt/brcm/hndtools-mipsel-uclibc/bin/../lib/gcc/mipsel-linux-uclibc/4.4.6/../../../../mipsel-linux-uclibc/lib/libc.so: undefined reference to `_dl_app_fini_array'

I'll set up a x64 vm according to your build-machine, as toolchain is working there.

edit:
^not possible, as my CPU doesn't support hardware virtualization


edit2: ok, cleaned up everything again (on the 32bit vm)... linked toolchain with -snf option!
cyassl didn't gave an error
it seems to work now - waiting....

[ryzhov_al]

it seems to work now - waiting....

Our OpenWRT repo includes ~30% of packages from original OpenWRT. Building takes about ~3.5 hours on my PC.

[wpte]

Our OpenWRT repo includes ~30% of packages from original OpenWRT. Building takes about ~3.5 hours on my PC.

if you require some build power, I have a intel sandy bridge 2600k clocked at 4GHz
I do build the toolchain myself, instead of downloading a pre-build one from googlecode.

btw, I'm just messing around with opkg on my second router. in the end I'd like to move from ipkg to opkg

I came accros this:

mysql: can't load library 'libncursesw.so.5'
$ opkg install libncurses
Package libncurses (5.7-5) installed in root is up to date.

and /opt/lib/libncurses.so.5 seems to be available

[!gm]

Our OpenWRT repo includes ~30% of packages from original OpenWRT. Building takes about ~3.5 hours on my PC.

was out for watching football
it stopped somewhere at ipset...
hm but I don't really care.. I just want minidlna and pyload....

now I use a minimal config via

make menuconfig

to get those two packages

[!gm]

I was successful...

minidlna disappeared during menuconfig (dunno why)..
but pyload got the version-bump as desired

here is the diff to be integrated to googlecode and the ipk, for the fast-ones

http://dl.dropbox.com/u/13972492/pyload_0.4.9-1_rtn.ipk

the MD5 is calculated on my own, as pyload.org doesn't provide it somehow

it's working

gm@ubuntu:~/openwrt/trunk/feeds/packages/net/pyload$ svn diff Makefile
Index: Makefile
===================================================================
--- Makefile    (revision 29955)
+++ Makefile    (working copy)
@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=pyload
-PKG_VERSION:=0.4.8
+PKG_VERSION:=0.4.9
 PKG_RELEASE:=1

 PKG_SOURCE:=$(PKG_NAME)-src-v$(PKG_VERSION).zip
 PKG_SOURCE_URL:=http://download.pyload.org/
-PKG_MD5SUM:=5bcf8411ef9e48ef6e9ade55bc697900
+PKG_MD5SUM:=9b2e5a7c884871a5489cb5141d5c704b

 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)/

@@ -38,12 +38,12 @@
 endef

 define Package/pyload/install
-       $(INSTALL_DIR) $(1)/usr/share/python
-       $(CP) $(PKG_BUILD_DIR)/pyload $(1)/usr/share/python/
-       $(INSTALL_DIR) $(1)/etc/init.d
-       $(INSTALL_BIN) ./files/pyload.init $(1)/etc/init.d/pyload
-       $(INSTALL_DIR) $(1)/usr/bin
-       $(LN) ../share/python/pyload/pyLoadCore.py $(1)/usr/bin/pyload
+       $(INSTALL_DIR) $(1)/opt/share/python
+       $(CP) $(PKG_BUILD_DIR)/pyload $(1)/opt/share/python/
+#      $(INSTALL_DIR) $(1)/etc/init.d
+#      $(INSTALL_BIN) ./files/pyload.init $(1)/etc/init.d/pyload
+       $(INSTALL_DIR) $(1)/opt/bin
+       $(LN) ../share/python/pyload/pyLoadCore.py $(1)/opt/bin/pyload
 endef

 $(eval $(call BuildPackage,pyload))

additionally I also altered packages.index to match version and filename - don't know, if this is really needed...

good night guys

[pSa]

Hello. I want to ask if you will also add additional packages from OpenWRT repository? I miss the mercurial, pure-ftpd, vim ...

Thanx.

[pheidrias]

Hello together!

Can someone please explain more detailed, how the switch from a ipkg system to opkg is supposed to work?

It is a change, isn't it? Can/Should one use ipkg and opkg together?

If so, how am I supposed to install opkg after removing ipkg?
Just tried to move all the content from /opt to a backup location and run the install script afterwards, but was confronted with some file not found errors (which seems to be logical, if all ipkg-files are removed...).

Is there a small guidance for me?

Thanks,
pheidrias - 1.9.2.7-rtn-r3825 on WL500gpv2

[pheidrias]

hmmm....before I try this...I can't find the acutal list of packages supported? Is there any online? Or can someone who has installed opkg post its list?

Do I have to remove ipkg itself (ipkg.sh remove ipkg --> does this work?)?

Please help a beginner with this! Thanks!