Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25

Thread: PWC 9.0.2 + Ov51x 2.17 Firmware release (experimental)?

  1. #16
    Join Date
    Jun 2005
    Location
    Portugal
    Posts
    21
    Ive sent the patches for Oleg.Theyre not final and for now they only support pwc web cameras.Support for omnivision will be added later.
    If anyone wants to test them take a look at:
    http://www.ruc.pt/~seabra/wl-500-pwc...-patch.tar.bz2

    To save usb bw compression is set to 2.This makes the image a little bit worse than already is but you can change this by hand in services_ex.c

    Kind Regards,

    João Seabra
    Asus Wl500g + Homebrew bi-quad antenna + 80 G 3.5" seagate H.D + Philips ToUCam II - 1.9.2.7-6b-seabra

  2. #17
    Join Date
    Jun 2005
    Location
    Portugal
    Posts
    21
    Quote Originally Posted by sir_lunatic
    I just tried your pwc and pwcx modules from this thread and I get the same issue as with Toms pwc/pwcx drivers when using with a Logitech Orbit.....it ends up not identifying the pan and tilt features.

    It does allow to capture the higher resolutions, however it breaks the pan and tilt feature.

    Could you please try :
    http://www.ruc.pt/~seabra/WL500g-1.9.2.7-6b.trx
    pwcx module is not included but you can try Toms or mine included in previous firmware

    Thanks
    Asus Wl500g + Homebrew bi-quad antenna + 80 G 3.5" seagate H.D + Philips ToUCam II - 1.9.2.7-6b-seabra

  3. #18
    It would be cool if you could add Pan and Tilt to the interface.

  4. #19

    Question 9.0.2 for WL-500gx???

    Nice work you did jseabra!!!

    I would very much like to test the newer pwc on my WL-500gx. Is it hard to upgrade the driver in Olegs 6b-image? Could this be done via telnet on a live router?
    I've been struggling a couple of days now with a Logitech QuickCam Pro 5000 - no luck so far. My last (and only hope) now is the pwc 9.0.2. Perhaps someone know about other possibilities?

    The ActiveX responds "couldn't connect to server", status LED is dark, camera is proved to be working on a PC and my System Log says:
    Jan 1 01:01:05 USB webcam: attached
    Jan 1 01:01:11 kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.12 loaded.
    Jan 1 01:01:11 kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
    Jan 1 01:01:11 kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
    Jan 1 01:01:11 kernel: usb.c: registered new driver Philips webcam

    I'd be grateful for any kind of help and advice.

    Merry Christmas to everybody!

  5. #20
    Join Date
    May 2004
    Location
    France...
    Posts
    159
    I've tested you're firmware : it works great with my Philipps camera. However, like in Oleg's firmware i'm getting a mirrored image...
    I also had some trouble with some messagebox :

    This is what i get after reseting all default settings and restarting the device.
    The Struggle Continues...
    Asus WL500g #1 with fw 1.9.2.7-7f running as main home gateway, with Philipps PWC730k
    Asus WL500g #2 with fw 1.9.2.7-7f running as Wireless Client, running palantir 2.6 with SPCA5xx camera on 128MB generic USB key

  6. #21
    Join Date
    Jun 2005
    Location
    Portugal
    Posts
    21
    Hi.

    In my latest firmware this issue was corrected.
    Are you sure you are using the latest??

    Merry Christmas,
    Seabra

    Quote Originally Posted by max2950
    I've tested you're firmware : it works great with my Philipps camera. However, like in Oleg's firmware i'm getting a mirrored image...
    I also had some trouble with some messagebox :

    This is what i get after reseting all default settings and restarting the device.
    Asus Wl500g + Homebrew bi-quad antenna + 80 G 3.5" seagate H.D + Philips ToUCam II - 1.9.2.7-6b-seabra

  7. #22
    Join Date
    Jun 2005
    Location
    Portugal
    Posts
    21
    Thanks!

    You can use pwc.o and pwcx.o and insmod them but its not trivial and requires some tricks.
    Anyway you wont be able to get 640x480 without using my firmware.

    Merry Christmas,

    Seabra

    Quote Originally Posted by catch23
    Nice work you did jseabra!!!

    I would very much like to test the newer pwc on my WL-500gx. Is it hard to upgrade the driver in Olegs 6b-image? Could this be done via telnet on a live router?
    I've been struggling a couple of days now with a Logitech QuickCam Pro 5000 - no luck so far. My last (and only hope) now is the pwc 9.0.2. Perhaps someone know about other possibilities?

    The ActiveX responds "couldn't connect to server", status LED is dark, camera is proved to be working on a PC and my System Log says:
    Jan 1 01:01:05 USB webcam: attached
    Jan 1 01:01:11 kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.12 loaded.
    Jan 1 01:01:11 kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
    Jan 1 01:01:11 kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
    Jan 1 01:01:11 kernel: usb.c: registered new driver Philips webcam

    I'd be grateful for any kind of help and advice.

    Merry Christmas to everybody!
    Asus Wl500g + Homebrew bi-quad antenna + 80 G 3.5" seagate H.D + Philips ToUCam II - 1.9.2.7-6b-seabra

  8. #23

    Asus Deluxe

    Hi,
    Can you compile it for asus deluxe too please and add this patch too http://mxhaard.free.fr/spca50x/Doc/K...6.patch.tar.gz ?
    Also i've tryed to use the ovcam module u provide with oleg firmware and i get:

    Using ovcamchip[1].o
    insmod: unresolved symbol i2c_detach_client
    insmod: unresolved symbol i2c_del_driver
    insmod: unresolved symbol i2c_smbus_read_byte_data
    insmod: unresolved symbol i2c_smbus_write_byte_data
    insmod: unresolved symbol i2c_attach_client
    insmod: unresolved symbol i2c_add_driver
    Last edited by florin_m; 01-01-2006 at 12:53.

  9. #24
    Join Date
    Jun 2005
    Location
    Portugal
    Posts
    21
    Quote Originally Posted by florin_m
    Hi,
    Can you compile it for asus deluxe too please and add this patch too http://mxhaard.free.fr/spca50x/Doc/K...6.patch.tar.gz ?
    Also i've tryed to use the ovcam module u provide with oleg firmware and i get:
    Hi!

    I do remember having some problems about a missing i2c module.I will check that.
    I cant apply that patch because its for 2.6 kernel while were using 2.4 kernel.
    Asus Wl500g + Homebrew bi-quad antenna + 80 G 3.5" seagate H.D + Philips ToUCam II - 1.9.2.7-6b-seabra

  10. #25
    Sorry, this one http://mxhaard.free.fr/spca50x/Doc/K...8.patch.tar.gz

    Is the 2.4 kernel.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. GPL Firmware 1.9.5 release (02/09/2005)
    By tscoreninja in forum WL-500g Firmware Releases
    Replies: 17
    Last Post: 29-10-2005, 14:22
  2. Replies: 38
    Last Post: 08-12-2004, 11:44

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •