Results 1 to 5 of 5

Thread: Upgrade WL-HDD to 1.2.7.9-10 or 1.2.7.9-d/1.9.2.7-rtn

  1. #1
    Join Date
    Apr 2011
    Location
    TaiPei,TW
    Posts
    3

    Upgrade WL-HDD to 1.9.2.7-10 or 1.9.2.7-d/1.9.2.7-rtn

    Hi all,

    Currently I am using "WLHDD-1.9.2.7-9-USB-1.71.trx" for my WLHDD device for a long time(2 years),
    It quite good for e169U 3.5G/HSDPA usb modem to internet accessing, while I am in outdoors.
    PS: http://koppel.cz/cdmawifi/download/1...9-USB-1.70.trx

    For some reasons I need recompiling/custom firmware and upgrade kernel ver,
    but so far the 1.9.2.7-10(kernel 2.4.20.XX) does no longer support original WL-500g/b/bv2/WL-300g/WL-HDD units(hardware vendor no longer support BCM4702 CPU).
    PS: http://oleg.wl500g.info/#latest
    And the new branch of 1.9.2.7-d(kernel 2.4.37) or 1.9.2.7-rtn(kernel 2.6.22) does not support WLHDD(BCM4702/BCM5325M) also.
    PS: http://code.google.com/p/wl500g/wiki/Devices

    I try to modify/um-remark root directory (in gateway) "Makefile" of 1.9.2.7-10 as below lines:
    1)
    MODEL=WLHDD
    2)
    images:
    #make images-WLHDD
    3)
    fast:
    #make images-WLHDD

    After "make ; make install" process, it builds "WLHDD-1.9.2.7-10.trx" without problems.
    unfortunately WLHDD(BCM4702/4MB flash/16MB SDR 32bit) seems doesn't work for new TRX file.
    BTW, this new "WLHDD-1.9.2.7-10.trx" does work in WL-520gu(BCM5354/4MB flash/16MB SDR 16bit) very well.

    Would please someone gives hints or ideals to tell me how to porting 1.2.7.9-10 or 1.2.7.9-d/1.9.2.7-rtn to WLHDD?
    Should I modify "shared/boot.S" or "shared/sbsdram.S", or other SFR setting,
    PS: http://code.google.com/p/wl500g/wiki/MemoryController
    Or to update driver OBJ form Broadcom.???

    Thanks,
    Have a NICE day,
    Eric Apr 27,2011
    Last edited by Eawen; 27-04-2011 at 13:41.

  2. #2
    Join Date
    Nov 2006
    Location
    Russia, Moscow
    Posts
    3,640
    There is no simple way, at all.

    At least, you have to backport support of an old CPU in Broadcom SDK - see src/include/*, src/shared/*

    Anyway, since there is no sources of WiFi driver, you will miss WiFi support.

  3. #3
    Join Date
    Apr 2011
    Location
    TaiPei,TW
    Posts
    3

    Upgrade WL-HDD to 1.9.2.7-10 or 1.9.2.7-d/1.9.2.7-rtn

    Hi Lly,

    Thanks for your quickly reply.
    So, does it means WLHDD(BCM4702/4MB flash/16MB SDR 32bit) just support "kernel 2.4.20.XX" tree only??? Once we want full function of WiFi.
    I have check below link of yours post:
    http://wl500g.info/showpost.php?p=129219&postcount=8
    Ha ha ha... , we should complain lazy Broadcom.
    And Oleg's post link about this:
    http://wl500g.info/showpost.php?p=373&postcount=30

    There's one thing annoy me very much.
    Basically in my concept, I think the "WLHDD-1.9.2.7-d-r2863.trx" should boot correct for WLHDD device, but it does not work and seems reboot loopy.
    PS: "svn checkout http://wl500g.googlecode.com/svn/trunk/" on Apr 8.
    Till I plug in Ethernet cable(of course the other side connect to PC), the device goes into rescue mode automatically.
    After I download "WLHDD-1.9.2.7-9-USB-1.71.trx", it works as before and just miss/overwrite flashfs only(but the nvram config remains).

    Here have I missed some setting or other???
    PLS check below modification of "gateway/Makefile":
    1)
    MODEL=WLHDD
    2)
    FlashMaxSize = \
    $(if $(filter $(1),WL520gc),1703936, \
    $(if $(filter $(1),WL500gx WL550gE WL320gE WL320gP WL330gE RT-N10 RT-N12),3801880, \
    $(if $(filter $(1),WL520gu WLHDD),3901880, \
    $(if $(filter $(1),WL500gp WL500W WL500gpv2 WL700g),7995392, \
    $(if $(filter $(1),RT-N16),16384000,0))))) \
    3)
    modules_install-WLHDD: modules_install install -t $(MODULESDIR) \
    $(NETFILTER_MODS_LIST)
    install -t $(MODULESDIR) \
    $(SRCMODULESDIR)/drivers/usb/host/usb-ohci.o \
    $(SRCMODULESDIR)/drivers/char/gpiortc.o \
    $(SRCMODULESDIR)/drivers/ide/ide-core.o \
    $(SRCMODULESDIR)/drivers/ide/ide-disk.o \
    $(SRCMODULESDIR)/drivers/ide/ide-detect.o
    4)
    images:
    make images-WLHDD

    Once again, the "WLHDD-1.9.2.7-9-USB-1.71.trx" work properly in WL-520GU model.
    I am a new one in recompiling/custom firmware task, learn lots technics form your helpful web page, it's great useful and thanks for your pay attention also effort.

    Have a NICE day,
    Eric Apr 27
    Last edited by Eawen; 27-04-2011 at 15:04.

  4. #4
    Join Date
    Apr 2011
    Location
    TaiPei,TW
    Posts
    3

    Port 1.9.2.7-10 or 1.9.2.7-d/1.9.2.7-rtn to WL-HDD

    Hi all,

    Have anyone get ideas or plans to migrate 1.9.2.7-9 of WL-HDD device to 1.9.2.7-10 or 1.9.2.7-d/1.9.2.7-rtn???

    PLS refer below post links.

    Have a NICE day,
    Eric Apr 27, 2011
    ================================================== ========
    --------------------------------------------------------------------------
    http://wl500g.info/showpost.php?p=230635&postcount=3
    --------------------------------------------------------------------------
    Hi Lly,

    Thanks for your quickly reply.
    So, does it means WLHDD(BCM4702/4MB flash/16MB SDR 32bit) just support "kernel 2.4.20.XX" tree only??? Once we want full function of WiFi.
    I have check below link of yours post:
    http://wl500g.info/showpost.php?p=129219&postcount=8
    Ha ha ha... , we should complain lazy Broadcom.
    And Oleg's post link about this:
    http://wl500g.info/showpost.php?p=373&postcount=30

    There's one thing annoy me very much.
    Basically in my concept, I think the "WLHDD-1.9.2.7-d-r2863.trx" should boot correct for WLHDD device, but it does not work and seems reboot loopy.
    PS: "svn checkout http://wl500g.googlecode.com/svn/trunk/" on Apr 8.
    Till I plug in Ethernet cable(of course the other side connect to PC), the device goes into rescue mode automatically.
    After I download "WLHDD-1.9.2.7-9-USB-1.71.trx", it works as before and just miss/overwrite flashfs only(but the nvram config remains).

    Here have I missed some setting or other???
    PLS check below modification of "gateway/Makefile":
    1)
    MODEL=WLHDD
    2)
    FlashMaxSize = \
    $(if $(filter $(1),WL520gc),1703936, \
    $(if $(filter $(1),WL500gx WL550gE WL320gE WL320gP WL330gE RT-N10 RT-N12),3801880, \
    $(if $(filter $(1),WL520gu WLHDD),3901880, \
    $(if $(filter $(1),WL500gp WL500W WL500gpv2 WL700g),7995392, \
    $(if $(filter $(1),RT-N16),16384000,0))))) \
    3)
    modules_install-WLHDD: modules_install install -t $(MODULESDIR) \
    $(NETFILTER_MODS_LIST)
    install -t $(MODULESDIR) \
    $(SRCMODULESDIR)/drivers/usb/host/usb-ohci.o \
    $(SRCMODULESDIR)/drivers/char/gpiortc.o \
    $(SRCMODULESDIR)/drivers/ide/ide-core.o \
    $(SRCMODULESDIR)/drivers/ide/ide-disk.o \
    $(SRCMODULESDIR)/drivers/ide/ide-detect.o
    4)
    images:
    make images-WLHDD

    Once again, the "WLHDD-1.9.2.7-9-USB-1.71.trx" work properly in WL-520GU model.
    I am a new one in recompiling/custom firmware task, learn lots technics form your helpful web page, it's great useful and thanks for your pay attention also effort.

    Have a NICE day,
    Eric Apr 27
    ================================================== ========

    --------------------------------------------------------------------------
    http://wl500g.info/showpost.php?p=230620&postcount=2
    --------------------------------------------------------------------------
    There is no simple way, at all.

    At least, you have to backport support of an old CPU in Broadcom SDK - see src/include/*, src/shared/*

    Anyway, since there is no sources of WiFi driver, you will miss WiFi support.
    __________________
    FW 1.9.2.7-d & 1.9.2.7-rtn
    ================================================== ========

    --------------------------------------------------------------------------
    http://wl500g.info/showpost.php?p=230618&postcount=1
    --------------------------------------------------------------------------
    Hi all,

    Currently I am using "WLHDD-1.9.2.7-9-USB-1.71.trx" for my WLHDD device for a long time(2 years),
    It quite good for e169U 3.5G/HSDPA usb modem to internet accessing, while I am in outdoors.
    PS: http://koppel.cz/cdmawifi/download/1...9-USB-1.70.trx

    For some reasons I need recompiling/custom firmware and upgrade kernel ver,
    but so far the 1.9.2.7-10(kernel 2.4.20.XX) does no longer support original WL-500g/b/bv2/WL-300g/WL-HDD units(hardware vendor no longer support BCM4702 CPU).
    PS: http://oleg.wl500g.info/#latest
    And the new branch of 1.9.2.7-d(kernel 2.4.37) or 1.9.2.7-rtn(kernel 2.6.22) does not support WLHDD(BCM4702/BCM5325M) also.
    PS: http://code.google.com/p/wl500g/wiki/Devices

    I try to modify/um-remark root directory (in gateway) "Makefile" of 1.9.2.7-10 as below lines:
    1)
    MODEL=WLHDD
    2)
    images:
    #make images-WLHDD
    3)
    fast:
    #make images-WLHDD

    After "make ; make install" process, it builds "WLHDD-1.9.2.7-10.trx" without problems.
    unfortunately WLHDD(BCM4702/4MB flash/16MB SDR 32bit) seems doesn't work for new TRX file.
    BTW, this new "WLHDD-1.9.2.7-10.trx" does work in WL-520gu(BCM5354/4MB flash/16MB SDR 16bit) very well.

    Would please someone gives hints or ideals to tell me how to porting 1.2.7.9-10 or 1.2.7.9-d/1.9.2.7-rtn to WLHDD?
    Should I modify "shared/boot.S" or "shared/sbsdram.S", or other SFR setting,
    PS: http://code.google.com/p/wl500g/wiki/MemoryController
    Or to update driver OBJ form Broadcom.???

    Thanks,
    Have a NICE day,
    Eric Apr 27,2011
    ================================================== ========
    Last edited by Eawen; 27-04-2011 at 15:45.

  5. #5
    Join Date
    Nov 2006
    Location
    Russia, Moscow
    Posts
    3,640
    Quote Originally Posted by Eawen View Post
    So, does it means WLHDD(BCM4702/4MB flash/16MB SDR 32bit) just support "kernel 2.4.20.XX" tree only??? Once we want full function of WiFi.
    wl.o module depends on:
    1. kernel internals
    2. broadcom SDK internals

    It is very complex task to provide binary compatibility for old module. Even "just for fun"...

    About makefiles - both we & Oleg simply forgot to remove WL-HDD at all.

    Anyway, for any device with 16Mb RAM you can forget about 2.6 kernel, period.

Similar Threads

  1. Несколько вопросов по Samba и USB HDD
    By falselight in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 188
    Last Post: 28-02-2012, 15:43
  2. Linux guru please help restore my hdd !!
    By engtteo in forum WL-700g Q&A
    Replies: 1
    Last Post: 06-06-2009, 01:50
  3. Upgrade internal hdd
    By angrybob100 in forum WL-700g Q&A
    Replies: 2
    Last Post: 11-05-2008, 11:16
  4. Dbox (NFS) findet die am Router angeschlossene HDD nicht
    By nostradamoss in forum German Discussion - Deutsch (DE)
    Replies: 15
    Last Post: 07-04-2008, 18:37

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •