New Asus RT-N66U Router

[ArCan]

Open telnet (you can turn it on in the administration of the router
...
do a reboot and your router will allow 500mW for 2.4GHz and 250mW for 5.2GHz connections.
...

I'm using Shibby 097 right now and several others f/w for RT-N66U but never stock f/w
and never see any changes in the level of signal even do set "Transmit Power" from 0(default to hardware) to max 500/250...
:-(
The dafault settings for my router are
"pci/1/1/ccode=0
pci/2/1/ccode=0
wl0_country_code=US
wl1_country_code=US
regulation_domain=US
regulation_domain_5G=Q2"

I changed it to "US" for all without any success.

I'm using the inSSIDer for control the lever of WiFi signals and always have almost plane line for both bands.
And doesn't matter 0...500 I fill in in "Transmission Power"

Only the position of router antennas dramaticaly change the level of signals (in the reseption place) !!!

Could you explain my situation and post your results of dependence level of signal and parameter in "Transmit Power".

P.S. I never see information that somebody changed the "Transmission Power" and had higher level of signal in air...
Will appriciate for links with really convincing results.
Thank you.

P.P.S. ... may be the reason for my negative expirience the third part firmware
and with stock firmware you have positive results for changes the transmit power...
I don't know...