Странно. Пропало сообщение. В общем: получил я новую прошивку для RT-N16. Ядро - 2.6.22!

Code:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Dec  4 16:48:54 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.3
CPU type 0x19740: 532MHz
Tot mem: 131072 KBytes

CFE mem:    0x80700000 - 0x8079AE30 (634416)
Data:       0x80731670 - 0x807343A0 (11568)
BSS:        0x807343A0 - 0x80734E30 (2704)
Heap:       0x80734E30 - 0x80798E30 (409600)
Stack:      0x80798E30 - 0x8079AE30 (8192)
Text:       0x80700000 - 0x80731670 (202352)

Device eth0:  hwaddr 00-90-4C-08-00-2D, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ...... 3360304 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (root@localhost.localdomain) (gcc version 4.1.2) #32 Fri Mar 6 21:19:31 CST 2009
CPU revision is: 00019740
Determined physical RAM map:
 memory: 07fff000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM4716 rev 1 at 532 MHz
Using 266.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126320k/131068k available (2619k kernel code, 4608k reserved, 540k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
NTFS driver 2.1.28 [Flags: R/O].
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x2000000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 1734
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x01fe0000 : "linux"
0x001b1848-0x01fe0000 : "rootfs"
0x01fe0000-0x02000000 : "nvram"
Found a 0MB  serial flash
sflash: found no supported devices
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1023 buckets, 8184 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Warning: unable to open an initial console.
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
read from nvram
insmod: ip_conntrack_ftp.ko: no module by that name found
insmod: ip_nat_ftp.ko: no module by that name found
insmod: nls_utf8.ko: no module by that name found
Hit enter to continue...read from nvram
waitpid: No child processes
insmod: ip_nat_starcraft.ko: no module by that name found
insmod: ipt_NETMAP.ko: no module by that name found
insmod: ip_conntrack_ftp.ko: no module by that name found
insmod: ip_nat_ftp.ko: no module by that name found
waitpid: No child processes
vlan1: No such device
vlan1: No such device
interface vlan1 does not exist!
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
waitpid: No child processes
telnetd: starting
  port: 23; interface: any; login program: /bin/sh
waitpid: No child processes
info, udhcp server (v0.9.8) started
killall: upnp: no process killed
UPnP::upnp_device_attach:br0: attach InternetGatewayDevice.xml
U2EC start ...
UPnP::upnp_init:UPnP daemon is ready to run
insmod: soundcore.ko: no module by that name found
waitpid: No child processes
insmod: audio.ko: no module by that name found
insmod: videodev.ko: no module by that name found
The inherited fd(3) is closed.
cannot get proto entry: No such file or directory
cannot get proto entry: No such file or directory
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
Debug::sharedkeystr=(null)
time.nist.gov: Unknown host

# Enable direct rule
**** clean ip_conntrack 1 time. ****
**** clean ip_conntrack 2 time. ****
echo for PaN ::: &&&PaN
Hit enter to continue...Starting full scan!
**** clean ip_conntrack 3 time. ****
killall: ntpclient: no process killed
time.nist.gov: Unknown host
killall: ntpclient: no process killed
time.nist.gov: Unknown host
Скорость ЮСБ пока не измерял.