Mini PCI mod: äåëàåì èç WL-500gPv1 WL-500W è ïîëó÷àåì Wi-Fi N !

[Omega]

About 5 ghz - sorry to tell you, but 5Ghz support doesn't physically soldered in Wl500gPv1 as i know.
So there is no way to set up the 5Ghz network on Wl500gPv1 with Broadcom 43221\43222.

Íó âîîáùå-òî íàðîä óæå çàïóñêàë äèàïàçîí 5 GHz ñ BCM43222 íà WL-500gP v1 çäåñü:
http://wl500g.info/showthread.php?27...5-GHz-DualBand

[Åâãåíèé Ë]

Íó âîîáùå-òî íàðîä óæå çàïóñêàë äèàïàçîí 5 GHz ñ BCM43222 íà WL-500gP v1 çäåñü:
http://wl500g.info/showthread.php?27...5-GHz-DualBand

ß ïîïðàâèë ñâîé ïðåäûäóùèé êîììåíò. Ïî ïîâîäó x-WRT ïðîøèâîê, êàê âèäíî ïî ññûëêå, øàíñ åñòü, íî ñ êó÷åé ãëþêîâ è "èç êîðîáêè" ýòî íå ðàáîòàåò è íóæíî ìíîãî ÷åãî ïåðåïèñûâàòü â ïðîøèâêå. Ïîýòîìó íàïèñàë ÷åëîâåêó ÷òî â "íàøåé" ïðîøèâêå ïîääåðæêè 5Ghz íåò, è âðîäå íå îáìàíóë åãî.

To AlexPPC: To clarify the situation about 5Ghz - there are some DD-WRT and Open-WRT firmwares which can practically set up the 5Ghz (try to read the thread in link above), but they have a lot of bugs and doesn't work well.
The enthusiasts from this forum should make a lot of changes in our firmware to make it work with 5 Ghz but actually nobody works in this direction due to abcense of time and\or will to make an efforts.
To Omega: Please correct me if i'm wrong.

[Hohmach]

Äà íîðìàëüíî îíî ðàáîòàåò, åñòü íåêîòîðûå îãðàíè÷åíèÿ ïî êàíàëàì, ïîñêîëüêó äðàéâåð wl äðåâíèé, â regulatory domain äëÿ Ðîññèè ðåæèìû N è AN îòêëþ÷åíû. N â ïðîøèâêå ðàáîòàåò ïîòîìó ÷òî ïî äåôîëòó âûáèðàåòñÿ domain DE. Íî â AN ðåæèìå íàøè êàíàëû ñ íåìåöêèìè ïåðåñåêàþòñÿ íå ïîëíîñòüþ, îñîáåííî äëÿ 40Mhz.
Ãëþêè ó ìåíÿ âûëåçàëè òîëüêî ïðè ñòðåññòåñòàõ, âïðî÷åì êðîìå òåñòîâ ÿ è íå ãîíÿë áîëüøå íè÷åãî.

Êîìó èíòåðåñíî, ìîæåòå ïîïðîáîâàòü ñàìè:
wl down
(wl country)
wl band a
wl chanspec
wl up

Ïèøó ïî ïàìÿòè, ìîæåò íàïóòàë. Òóò òîëüêî ñàìè êîìàíäû, áåç çíà÷åíèé ïàðàìåòðîâ.

[person]

Êîìó-òî ìîæåò ïðèãîäèòüñÿ ýòà èíôîðìàöèÿ.

Êàê ÿ óæå ïèñàë, íà ðîóòåð WL-500gPv1 áûëè âîçëîæåíû áîëåå ïðîñòûå îáÿçàííîñòè.

Òàê âîò,
à) ñ ïðîøèâêîé r5631 (ñì. ïîñò);
á) â ðåæèìå Ethernet Bridge;
â) è ïðè íåàêòèâíîì èñïîëüçîâàíèè (õîòÿ ïðÿìîé çàâèñèìîñòè îò íàãðóçêè ðàíüøå íå çàìå÷àë, íî íàãðóçèòü, ïðè æåëàíèè, ìîæíî è ñåé÷àñ),
ðîóòåð, ïîõîæå, ïåðåñòàë ñàìîïðîèçâîëüíî ïåðåãðóæàòüñÿ.

Íàïðèìåð, íà òåêóùèé ìîìåíò àïòàéì ñîñòàâëÿåò 36 äíåé, òîãäà êàê â ïðîøëîì -- ìàêñèìóì ~2 íåäåëè.

[AlexPPC]

ß ïîïðàâèë ñâîé ïðåäûäóùèé êîììåíò. Ïî ïîâîäó x-WRT ïðîøèâîê, êàê âèäíî ïî ññûëêå, øàíñ åñòü, íî ñ êó÷åé ãëþêîâ è "èç êîðîáêè" ýòî íå ðàáîòàåò è íóæíî ìíîãî ÷åãî ïåðåïèñûâàòü â ïðîøèâêå. Ïîýòîìó íàïèñàë ÷åëîâåêó ÷òî â "íàøåé" ïðîøèâêå ïîääåðæêè 5Ghz íåò, è âðîäå íå îáìàíóë åãî.

To AlexPPC: To clarify the situation about 5Ghz - there are some DD-WRT and Open-WRT firmwares which can practically set up the 5Ghz (try to read the thread in link above), but they have a lot of bugs and doesn't work well.
The enthusiasts from this forum should make a lot of changes in our firmware to make it work with 5 Ghz but actually nobody works in this direction due to abcense of time and\or will to make an efforts.
To Omega: Please correct me if i'm wrong.

Great Answer !
Hats Off to you !

Will try to read the tread noted, and to considering questions, if any.
I am currently more than happy with the flash I've made with your supporting instructions here. Works flawlessly, including the added second antenna (symmetrically to the original one).
I have just one more question:
-Is it possible, in its current condition (e.g. flashed with the FW .5528 from here) to have a use of 3G USB modem (from a mobile operator) ?

TNX again for your professional support !

[Åâãåíèé Ë]

Great Answer !
-Is it possible, in its current condition (e.g. flashed with the FW .5528 from here) to have a use of 3G USB modem (from a mobile operator) ?

As far as i know there are a lot of 3G-modems supported by enthusiasts's firmware. You can check it yourself. Just connect your 3G-modem, open the firmware's web interface (192.168.1.1), you will see the menu on the left side. Choose "USB network deviced" and tap the "3G/CDMA Modem". Set checkbox "Set as WAN Connection Type by default", add the username\password\dial number and APN from your provider(call the support in case you doesn't know the APN and dial number) and press "apply" and "finish" buttons on the bottom of this page. 3G-modem should start working as default internet source.

[cenzored]

Âñåì ïðèâåò!
Áîëüøîå ñïàñèáî çà óñèëèÿ ïî âûïóñêó ïðîøèâîê ñ ïîääåðæêîé N!

ß ñäåëàë âñå êàê íàïèñàíî è ñëîâèë ãëþê - ñòîèò òîëüêî çàïóñòèòü speedtest ïî wifi êàê ðîóòåð óõîäèò â ðåáóò. Èëè èíîãäà ïðîñòî óõîäèò â ðåáóò ñàì ïî ñåáå. Ïî øíóðó âñå îòëè÷íî è ñêîðîñòü âûäàåò êàêóþ ïîëîæåíî. Ïðîáîâàë ðàçíûå ðåæèìû wifi è âñåãäà îäíî è òîæå.

Êàðòî÷êà bcm43222 (òèïà òàêîé http://www.ebay.com/itm/Broadcom-BCM...-/200787686133) ÍÎ àíòåííà òîëüêî îäíà ðîäíàÿ ò.ê. âòîðàÿ åù¸ íå ïðèåõàëà èç Êèòàÿ. Ìîæåò ëè áûòü ïðîáëåìà â òîì, ÷òî ó ìåíÿ òîëüêî îäíà àíòåííà è ñ äâóìÿ âñ¸ çàðàáîòàåò?

Èëè ñòîèò îáðàòèòü âíèìàíèå íà êàêèå-òî íàñòðîéêè?

Ðàçãîí/áåç íå âëèÿåò, ïðîøèâêè ïðîáîâàë èç ýòîé òåìû - 1.9.2.7-rtn-r5631M è 1.9.2.7-rtn-r5066M (âòîðàÿ êàæåòñÿ ðåæå ïàäàåò). Êîíäåð â áëîêå ïèòàíèÿ ìåíÿë êîãäà-òî, êîãäà ñòàðûé âñïóõ. Ñ ðîäíîé êàðòîé è ïðîøèâêîé îò Îëåãà âñå ðàáîòàëî êàê ÷àñû, íèêîãäà íå ïàäàëî.

Áóäó áëàãîäàðåí çà ëþáûå ñîâåòû,
ñïàñèáî!

UPD
Ñîáñòâåííî ê ðåáóòó ïðèâîäèò ëþáàÿ àêòèâíîñòü ïî wifi, ñòîèò îòêðûòü ñàéò ïîòÿæåëåå è âñ¸ ïàäàåò :-(

UPD2
Äà, ïîõîæå Omega ïðàâ - ïàðî÷êà êîíäåðîâ íà ïëàòå âûãëÿäèò ïîäîçðèòåëüíî îêðóãëûìè ñâåðõó, ïîïðîáóþ çàìåíèòü âñå.

[staticroute]

Âñåì ïðèâåò!
Áîëüøîå ñïàñèáî çà óñèëèÿ ïî âûïóñêó ïðîøèâîê ñ ïîääåðæêîé N!

ß ñäåëàë âñå êàê íàïèñàíî è ñëîâèë ãëþê - ñòîèò òîëüêî çàïóñòèòü speedtest ïî wifi êàê ðîóòåð óõîäèò â ðåáóò. Èëè èíîãäà ïðîñòî óõîäèò â ðåáóò ñàì ïî ñåáå. Ïî øíóðó âñå îòëè÷íî è ñêîðîñòü âûäàåò êàêóþ ïîëîæåíî. Ïðîáîâàë ðàçíûå ðåæèìû wifi è âñåãäà îäíî è òîæå.

Êàðòî÷êà bcm43222 (òèïà òàêîé http://www.ebay.com/itm/Broadcom-BCM...-/200787686133) ÍÎ àíòåííà òîëüêî îäíà ðîäíàÿ ò.ê. âòîðàÿ åù¸ íå ïðèåõàëà èç Êèòàÿ. Ìîæåò ëè áûòü ïðîáëåìà â òîì, ÷òî ó ìåíÿ òîëüêî îäíà àíòåííà è ñ äâóìÿ âñ¸ çàðàáîòàåò?

Èëè ñòîèò îáðàòèòü âíèìàíèå íà êàêèå-òî íàñòðîéêè?

Ðàçãîí/áåç íå âëèÿåò, ïðîøèâêè ïðîáîâàë èç ýòîé òåìû - 1.9.2.7-rtn-r5631M è 1.9.2.7-rtn-r5066M (âòîðàÿ êàæåòñÿ ðåæå ïàäàåò). Êîíäåð â áëîêå ïèòàíèÿ ìåíÿë êîãäà-òî, êîãäà ñòàðûé âñïóõ. Ñ ðîäíîé êàðòîé è ïðîøèâêîé îò Îëåãà âñå ðàáîòàëî êàê ÷àñû, íèêîãäà íå ïàäàëî.

Áóäó áëàãîäàðåí çà ëþáûå ñîâåòû,
ñïàñèáî!

UPD
Ñîáñòâåííî ê ðåáóòó ïðèâîäèò ëþáàÿ àêòèâíîñòü ïî wifi, ñòîèò îòêðûòü ñàéò ïîòÿæåëåå è âñ¸ ïàäàåò :-(

èñõîäíèêîâ äðàéâåðà wifi íåò è íå áóäåò ñêîðåå âñåãî (âèíèòå ëþáèìûé broadcom).

àíàëîãà äðàéâåðà ïîä ýòè êàðòû ñ îòêðûòûì êîäîì ïîëíîöåííîãî ïîêà ÷òî íåòó, òàê ÷òî ðåêîìåíäóþ ïðîäàòü ñâîé wl500gP è êóïèòü íîðìàëüíûé ðîóòåð, êîòîðûé ïîääåðæèâàåòñÿ OpenWRT (íàïðèìåð: tp-link archer c7 èëè netgear wndr4800).

[cenzored]

èñõîäíèêîâ äðàéâåðà wifi íåò è íå áóäåò ñêîðåå âñåãî (âèíèòå ëþáèìûé broadcom

Òàê ó âñåõ ðàáîòàåò â ýòîé âåòêå :-)

[staticroute]

Òàê ó âñåõ ðàáîòàåò â ýòîé âåòêå :-)

âñåãäà ëþáèë òàêèå âûâîäû )

âñå òåñòèëè ïîä íîðìàëüíîé íàãðóçêîé? î÷åíü ñîìíåâàþñü

[cenzored]

Âñåì ïðèâåò!
UPD2
Äà, ïîõîæå Omega ïðàâ - ïàðî÷êà êîíäåðîâ íà ïëàòå âûãëÿäèò ïîäîçðèòåëüíî îêðóãëûìè ñâåðõó, ïîïðîáóþ çàìåíèòü âñå.

Ïîìåíÿë âñå êîíä¸ðû è âñ¸ çàðàáîòàëî êàê ïîëîæåíî. Ïîêà îäíà øòàòíàÿ àíòåííà, speedtest ïîêàçûâàåò `36Mb/s ÷òî áëèçêî ê ìàêñèìóìó ìîåãî òàðèôà (40), ïîñëåäíÿÿ áåòà èç ýòîé âåòêè, íè÷åãî âðîäå íå ïàäàåò.

Ñïàñèáî Åâãåíèé Ë çà òðóäû :-)

[Åâãåíèé Ë]

Ñïàñèáî Åâãåíèé Ë çà òðóäû :-)

Ñïàñèáî Omega çà öåííûå ñîâåòû è Óâàæàåìûì Äåâåëîïåðàì çà ñòàðàíèÿ! ;-) Ñ íåòåðïåíèåì æä¸ì íîâûõ êîììèòîâ!

[Åâãåíèé Ë]

 ñâÿçè ñ ïåðåõîäîì íà Asus RT-N66u è ìîèì 30-ì äí¸ì ðîæäåíèÿ 3-ãî àâãóñòà, ïóáëèêóþ ïðàçäíè÷íûé àðõèâ ïðîøèâîê äëÿ Asus Wl500gP v1 + Broadcom 43222\43221. Âîçìîæíî êîìó-òî ïðèãîäèòñÿ. Íîâûõ ïðîøèâîê ïîêà íåò, ò.ê. â ñâÿçè ñ ïåðåõîäîì Óâàæàåìûõ Ðàçðàáîò÷èêîâ íà GitHub ñáîðêà ñëîìàëàñü, è êîãäà ïî÷èíþ å¸, óâû, ïîêà íå çíàþ. Âêëþ÷åíû âñå ïðîøèâêè, â òîì ÷èñëå è ñëîìàííûå è íåñòàáèëüíûå. Íàïîìèíàþ, ÷òî ÿ íå íåñó îòâåòñòâåííîñòè çà íåóäà÷íî ïðîøèòûå è\èëè áðèêíóòûå ðîóòåðû.  ëþáîì ñëó÷àå æåëàþ ðàçðàáîò÷èêàì óñïåõîâ, à ïîëüçîâàòåëÿì ñòàáèëüíîé è áåçóïðå÷íîé ðàáîòû âàøèõ ðîóòåðîâ!

Due to migration to Asus RT-N66u and my 30th birthday i'm proud to present you anniversary archive of Asus Wl500gP v1 + Broadcom 43222\43221 builds. Probably it will be useful for somebody. There ane no new builds because of developer's migration to Github and now buiding scripts are broken and need to be repaired. I don't know when i will have time to do it. Also broken and probably unstable builds included to archive. For you notice: i'll not carry any responsibility for unsuccessfully flashed or bricked routers. Anyway, i have to say thank you for all developers for their work and wish to have a stable and flawless routers working for all users!

Êà÷àòü òóò(ñàìîðàñïàêîâûâàþùèéñÿ RAR5 àðõèâ ) \ Download here(Self-extracting RAR5 archive): - LINK

[NOVAK]

Ïðèâåò, Åâãåíèé. Äàâíî õîòåë íàïèñàòü, íî âñå íå áûëî âðåìåíè. Ïîñëå çàìåíû wi-fi ìîäóëÿ íà Broadcom 43222 íå ñðàçó, íî çàìåòèë ñëåäóþùèé áàã: òî÷êà äîñòóïà wi-fi ðåäêî èñ÷åçàåò, ò.å. ïåðåñòà¸ò âåùàòüñÿ ïðèìåðíî íà ïîë ìèíóòû - íà ìèíóòó. Ïîòîì ñàìà æå è âêëþ÷àåòñÿ è ðàçäàåò èíåò êàê íè â ÷åì íå áûâàëî. Ýòî ïðîèñõîäèò î÷åíü ðåäêî, íî â ïîñëåäíåå âðåìÿ íà÷àëî ðàçäðàæàòü, ò.ê. ïðîèñõîäèëî â î÷åíü âàæíûõ îí-ëàéí èãðàõ. Ìîæíî ëè ýòî êàê-òî ïîáîðîòü èëè ìîæåò êòî-íèáóäü âñòðå÷àëñÿ ñ òàêîé ïðîáëåìîé è çíàåò ðåøåíèå? Ïðîøèâêà ïîñëåäíÿÿ îò Âàñ r5631M.

[Åâãåíèé Ë]

Äîáðîãî âðåìåíè ñóòîê âñåì! ß êàæåòñÿ ïðîàïäåéòèë ñâîè ñáîðî÷íûå ñêðèïòû è ñîáðàë íîâóþ áåòó. Íà âñÿêèé ñëó÷àé -áóäüòå ãîòîâû âîññòàíàâëèâàòüñÿ èç ðåêàâåðè(ïîëãîäà ïðîøèâêè íå ñîáèðàë, ìîãëî ìíîãî ÷åãî ïîìåíÿòüñÿ) ò.ê. ó ìåíÿ áîëåå íåò â íàëè÷èè WL500+Broadcom ÿ íå ìîãó ïðîâåñòè òåñòû íà ñâî¸ì æåëåçå.  ëþáîì ñëó÷àå, ñáîðêà ïðîøëà óñïåøíî è, ÿ äóìàþ, ÷òî ïðîøèâêà äîëæíà óñïåøíî ðàáîòàòü. Ññûëêà íà ñêà÷èâàíèå ÂÍÈÇÓ. Óâàæàåìûå òåñòåðû, ïîæàëóéñòà îòïèøèòåñü î ðåçóëüòàòàõ ðàáîòû ýòîé ñáîðêè, ÷òîáû îñòàëüíûå ìîãëè ñìåëî å¸ êà÷àòü íè î ÷åì íå âîëíóÿñü ;-)

Hi guys! Seems to be i updated my autobuild scripts and made a new beta. Just in case - be ready to recover your WL500 from recovery mode because i don't have WL500 router with Broadcom card anymore and i can't test this firmware myself. Anyway i think building went fine and firmware have to be ok! Dear testers, please leave a message about your expierience using this build to let others know that this build is safe to install and use! ;-)
Here's the link:

WL500gPv1+Broadcom 4322x r7487 beta firmware