Page 26 of 26 FirstFirst ... 16242526
Results 376 to 385 of 385

Thread: Настройка IPv6 на Asus RT-N16

  1. #376

    Question ipv6 в работе

    Доброго всем.
    С недавнего времени подключился к Онлайм/Ростелеком (Москва), у них в тестовом режиме Native IPv6, а IPv4 на младших тарифах за NAT-ом.
    В вебморде (RT-N16@1.9.2.7-rtn-r5450) IPv6 поставил всё на Авто (картинку прилагаю), заработало только после перезагрузки роута (может модули подгрузил).
    Name:  ipv6_rtn16_00_cut_edit_resize.png
Views: 1680
Size:  100.8 KB
    На клиенте Win7, настроилось автоматом (RA), тесты http://test-ipv6.com/ 10/10.
    Дальше разрешил входящие соединения для торрента (на статический порт):
    Code:
    post-firewall
    ip6tables -I FORWARD 9 -o br0 -p tcp -m tcp --syn --dport 12345 -j ACCEPT
    ip6tables -I FORWARD 10 -o br0 -p udp -m udp --dport 12345 -j ACCEPT
    Получилось так, и даже работает:
    Code:
    ip6tables -nvL
    Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination
        0     0 logdrop    all      *      *       ::/0                 ::/0                rt type:0
        0     0 logdrop    all      *      *       ::/0                 ::/0                ctstate INVALID
       28  2688 ACCEPT     all      *      *       ::/0                 ::/0                ctstate RELATED,ESTABLISHED
        0     0 ACCEPT     all      lo     *       ::/0                 ::/0                ctstate NEW
     1295  108K ACCEPT     all      br0    *       ::/0                 ::/0                ctstate NEW
        0     0 ACCEPT     all      *      *       ff00::/8             ::/0
       79 12728 SECURITY   all      vlan2  *       ::/0                 ::/0                ctstate NEW
       79 12728 ACCEPT     udp      *      *       ::/0                 ::/0                udp dpt:546
     6601  736K ACCEPT     icmpv6    *      *       ::/0                 ::/0                ipv6-icmp !type 128
        0     0 logdrop    all      *      *       ::/0                 ::/0
    
    Chain FORWARD (policy ACCEPT 2187 packets, 155K bytes)
     pkts bytes target     prot opt in     out     source               destination
        0     0 logdrop    all      *      *       ::/0                 ::/0                rt type:0
        0     0 ACCEPT     all      br0    br0     ::/0                 ::/0
        1    60 logdrop    all      *      *       ::/0                 ::/0                ctstate INVALID
        0     0 ACCEPT     all      *      *       ff00::/8             ::/0
     803K  661M ACCEPT     all      *      *       ::/0                 ::/0                ctstate RELATED,ESTABLISHED
        0     0 logdrop    all      !br0   vlan2   ::/0                 ::/0
     5102  271K SECURITY   all      !br0   *       ::/0                 ::/0                ctstate NEW
        0     0 ACCEPT     icmpv6    *      br0     ::/0                 ::/0                ipv6-icmp !type 128
      124  8828 ACCEPT     tcp      *      br0     ::/0                 ::/0                tcp dpt:12345 flags:0x17/0x02
      187 12796 ACCEPT     udp      *      br0     ::/0                 ::/0                udp dpt:12345
     4791  249K logdrop    all      *      br0     ::/0                 ::/0
    
    Chain OUTPUT (policy ACCEPT 8693 packets, 976K bytes)
     pkts bytes target     prot opt in     out     source               destination
        0     0 logdrop    all      *      *       ::/0                 ::/0                rt type:0
    
    Chain BRUTE (0 references)
     pkts bytes target     prot opt in     out     source               destination
    
    Chain MACS (0 references)
     pkts bytes target     prot opt in     out     source               destination
    
    Chain SECURITY (2 references)
     pkts bytes target     prot opt in     out     source               destination
    
    Chain logaccept (0 references)
     pkts bytes target     prot opt in     out     source               destination
        0     0 LOG        all      *      *       ::/0                 ::/0                ctstate NEW LOG flags 39 level 4 prefix `ACCEPT '
        0     0 ACCEPT     all      *      *       ::/0                 ::/0
    
    Chain logdrop (8 references)
     pkts bytes target     prot opt in     out     source               destination
     4791  249K LOG        all      *      *       ::/0                 ::/0                ctstate NEW LOG flags 39 level 4 prefix `DROP '
     4792  249K DROP       all      *      *       ::/0                 ::/0
    1. Вопрос к гуру iptables - всё правильно сделал?
    2. Вопрос туда же - почему цепочка SECURITY пустая? Нет защиты от DDOS? Можно воткнуть туда правила из IPv4 SECURITY?
    3. После настройки IPv6 в лог каждые 15 минут начал флудить dnsmasq:
    Code:
    Sep 11 16:02:47 dnsmasq[228]: read /etc/hosts - 3 addresses
    Sep 11 16:02:47 dnsmasq[228]: using nameserver 77.37.251.33#53
    Sep 11 16:02:47 dnsmasq[228]: using nameserver 77.37.255.30#53
    Sep 11 16:02:47 dnsmasq[228]: using nameserver 2a02:2168:208:1::1#53
    Sep 11 16:02:47 dnsmasq[228]: using nameserver 2a02:2168:208:2::1#53
    Sep 11 16:02:53 dnsmasq[228]: read /etc/hosts - 3 addresses
    Sep 11 16:02:53 dnsmasq[228]: using nameserver 77.37.251.33#53
    Sep 11 16:02:53 dnsmasq[228]: using nameserver 77.37.255.30#53
    Sep 11 16:02:53 dnsmasq[228]: using nameserver 2a02:2168:208:1::1#53
    Sep 11 16:02:53 dnsmasq[228]: using nameserver 2a02:2168:208:2::1#53
    Sep 11 16:17:47 dnsmasq[228]: read /etc/hosts - 3 addresses
    Sep 11 16:17:47 dnsmasq[228]: using nameserver 77.37.251.33#53
    Sep 11 16:17:47 dnsmasq[228]: using nameserver 77.37.255.30#53
    Sep 11 16:17:47 dnsmasq[228]: using nameserver 2a02:2168:208:1::1#53
    Sep 11 16:17:47 dnsmasq[228]: using nameserver 2a02:2168:208:2::1#53
    Sep 11 16:17:53 dnsmasq[228]: read /etc/hosts - 3 addresses
    Sep 11 16:17:53 dnsmasq[228]: using nameserver 77.37.251.33#53
    Sep 11 16:17:53 dnsmasq[228]: using nameserver 77.37.255.30#53
    Sep 11 16:17:53 dnsmasq[228]: using nameserver 2a02:2168:208:1::1#53
    Sep 11 16:17:53 dnsmasq[228]: using nameserver 2a02:2168:208:2::1#53
    Code:
    dnsmasq.conf
    user=nobody
    resolv-file=/tmp/resolv.conf
    no-poll
    interface=br0
    no-negcache
    cache-size=512
    dhcp-leasefile=/tmp/dnsmasq.log
    dhcp-range=lan,192.168.1.101,192.168.1.254,86400
    dhcp-option=lan,252,"\n"
    dhcp-authoritative
    quiet-ra
    ra-param=br0,10,1800
    dhcp-range=lan,::,constructor:br0,ra-stateless,ra-names,64,600
    dhcp-option=lan,option6:23,[::]
    Это нормально? И из-за чего может быть?
    Last edited by ff0255; 11-09-2016 at 18:28. Reason: добавил цвет
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

  2. #377
    Quote Originally Posted by ff0255 View Post
    Доброго всем.
    В вебморде (RT-N16@1.9.2.7-rtn-r5450) IPv6 поставил всё на Авто (картинку прилагаю), заработало только после перезагрузки роута (может модули подгрузил).
    применение настроек тут только после apply, finish, save & restart

    Quote Originally Posted by ff0255 View Post
    2. Вопрос туда же - почему цепочка SECURITY пустая? Нет защиты от DDOS? Можно воткнуть туда правила из IPv4 SECURITY?
    не реализовано для IPv6

    Quote Originally Posted by ff0255 View Post
    3. После настройки IPv6 в лог каждые 15 минут начал флудить dnsmasq:
    Это нормально? И из-за чего может быть?
    Ну, относительно. Провайдер выдает аренду IPv6 на 30 минут, после половины времени происходит обновление, в т.ч. адресов DNS, используемых dnsmasq.

  3. #378

    ipv6 в работе

    Спасибо за разъяснения (а заодно и за прошивку))
    Не нашел где можно посмотреть время аренды IPv6 (да и v4 тоже).
    есть /tmp/udhcpc0.expires - там 1473940098 - на секунды не похоже;
    есть /tmp/var/state/dhcp6c_duid - там пусто.

    UPD
    Отловил через tcpdump
    Code:
    $ tcpdump -i vlan2 -vv -n port 546 or 547
    tcpdump: listening on vlan2, link-type EN10MB (Ethernet), capture size 65535 bytes
    14:48:36.558449 IP6 (hlim 64, next-header UDP (17) payload length: 96) fe80::12bf:48ff:fee6:193f.546 > ff02::1:2.547: [udp sum ok] dhcp6 renew (xid=c5dcd (client-ID hwaddr type 1 10bf48e6193f) (server-ID hwaddr type 1 001af0481351) (elapsed-time 0) (option-request DNS-server) (IA_NA IAID:399679 T1:900 T2:1500 (IA_ADDR 2a02:2168:xxxx:xxxx::2 pltime:1800 vltime:1800) (opt_0) (opt_0) (opt_0)))
    14:48:36.575449 IP6 (class 0xc0, hlim 255, next-header UDP (17) payload length: 120) fe80::21a:f0ff:fe48:1351.547 > fe80::12bf:48ff:fee6:193f.546: [udp sum ok] dhcp6 reply (xid=c5dcd (server-ID hwaddr type 1 001af0481351) (client-ID hwaddr type 1 10bf48e6193f) (IA_NA IAID:399679 T1:900 T2:1500 (IA_ADDR 2a02:2168:xxxx:xxxx::2 pltime:1800 vltime:1800)[|dhcp6ext]) (DNS-server 2a02:2168:208:1::1 2a02:2168:208:2::1))
    14:48:45.147384 IP6 (hlim 64, next-header UDP (17) payload length: 97) fe80::12bf:48ff:fee6:193f.546 > ff02::1:2.547: [udp sum ok] dhcp6 renew (xid=f3127b (client-ID hwaddr type 1 10bf48e6193f) (server-ID hwaddr type 1 001af0481351) (IA_PD IAID:399679 T1:900 T2:1500 (IA_PD-prefix 2a02:2168:xxxx:xxxx::/56 pltime:1800 vltime:1800) (elapsed-time 0) (option-request DNS-server)) (elapsed-time 0) (option-request DNS-server))
    14:48:45.154471 IP6 (class 0xc0, hlim 255, next-header UDP (17) payload length: 121) fe80::21a:f0ff:fe48:1351.547 > fe80::12bf:48ff:fee6:193f.546: [udp sum ok] dhcp6 reply (xid=f3127b (server-ID hwaddr type 1 001af0481351) (client-ID hwaddr type 1 10bf48e6193f) (IA_PD IAID:399679 T1:900 T2:1500 (IA_PD-prefix 2a02:2168:xxxx:xxxx::/56 pltime:1800 vltime:1800)[|dhcp6ext]) (DNS-server 2a02:2168:208:1::1 2a02:2168:208:2::1))
    И по времени точно совпадает с логом от dnsmasq.
    1800 сек = 30 мин
    Я так понимаю, что 30 мин это настройки прова, и поменять их нельзя.?
    Last edited by ff0255; 15-09-2016 at 14:28. Reason: UPD
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

  4. #379
    Quote Originally Posted by ff0255 View Post
    Не нашел где можно посмотреть время аренды IPv6 (да и v4 тоже).
    есть /tmp/udhcpc0.expires - там 1473940098 - на секунды не похоже;
    есть /tmp/var/state/dhcp6c_duid - там пусто.
    аренду ipv4 можно поглядеть через nvram get wan0_lease.
    аренда ipv6 нигде не учитывается.

    Quote Originally Posted by ff0255 View Post
    Я так понимаю, что 30 мин это настройки прова, и поменять их нельзя.?
    да, все верно.
    см http://asus.vectormm.net/rtn/7528/, должно помочь с флудом в сислоге.

  5. #380
    Quote Originally Posted by theMIROn View Post
    см http://asus.vectormm.net/rtn/7528/, должно помочь с флудом в сислоге.
    Спасибо за фикс, попробовал r7528, но стало еще хуже
    Сразу после загрузки:
    Code:
    Jan  1 03:00:07 dhcp6c[299]: started
    Jan  1 03:00:08 dhcp client: deconfig: lease is lost
    Jan  1 03:00:08 dnsmasq[222]: read /etc/hosts - 3 addresses
    Jan  1 03:00:08 dhcp6c[299]: sendto: Cannot assign requested address
    Jan  1 03:00:08 dnsmasq[222]: read /etc/hosts - 3 addresses
    Jan  1 03:00:08 dnsmasq[222]: using nameserver 77.37.251.33#53
    Jan  1 03:00:08 dnsmasq[222]: using nameserver 77.37.255.30#53
    Jan  1 03:00:08 kernel: vlan2: dev_set_allmulti(master, 1)
    Jan  1 03:00:08 miniupnpd[223]: shutting down MiniUPnPd
    Jan  1 03:00:09 dhcp6c[299]: add address 2a02:2168:3fc6:c400:12bf:48ff:fee6:193f/56 on br0
    Jan  1 03:00:09 dhcp6c[299]: status code for identity association-1: no addresses
    Jan  1 03:00:09 dnsmasq[222]: read /etc/hosts - 3 addresses
    Jan  1 03:00:09 dnsmasq[222]: using nameserver 77.37.251.33#53
    Jan  1 03:00:09 dnsmasq[222]: using nameserver 77.37.255.30#53
    Jan  1 03:00:09 dnsmasq[222]: using nameserver 2a02:2168:208:1::1#53
    Jan  1 03:00:09 dnsmasq[222]: using nameserver 2a02:2168:208:2::1#53
    Jan  1 03:00:09 miniupnpd[332]: HTTP listening on port 32961
    Jan  1 03:00:09 dhcp client: bound IP : 10.236.36.79 from 10.236.32.1
    Jan  1 03:00:10 dhcp6c[299]: status code for identity association-1: no addresses
    Jan  1 03:00:10 dnsmasq-dhcp[222]: DHCPv6 stateless on 2a02:2168:3fc6:c400::, constructed for br0
    Jan  1 03:00:10 dnsmasq-dhcp[222]: DHCPv4-derived IPv6 names on 2a02:2168:3fc6:c400::, constructed for br0
    Jan  1 03:00:10 dnsmasq-dhcp[222]: router advertisement on 2a02:2168:3fc6:c400::, constructed for br0
    Sep 28 01:02:21 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:22 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:23 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:24 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:25 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:26 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:27 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:28 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:29 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:30 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:30 ntp client: Synchronizing time with pool.ntp.org...
    Sep 28 01:02:30 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:31 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:32 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:33 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:34 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:35 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:36 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:37 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:38 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:39 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:40 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:41 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:42 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:43 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:44 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:45 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:46 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:47 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:48 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:49 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:50 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:51 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:52 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:53 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:54 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:55 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:56 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:57 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:58 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:02:59 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:00 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:01 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:02 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:03 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:04 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:05 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:06 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:07 dhcp6c[299]: status code for identity association-1: no addresses
    Sep 28 01:03:08 dhcp6c[299]: status code for identity association-1: no addresses
    Времени разбираться не было, прошил обратно r5450, флуд dhcp6c исчез.
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

  6. #381
    Quote Originally Posted by ff0255 View Post
    Спасибо за фикс, попробовал r7528, но стало еще хуже
    Сразу после загрузки:
    Code:
    Sep 28 01:02:21 dhcp6c[299]: status code for identity association-1: no addresses
    Времени разбираться не было, прошил обратно r5450, флуд dhcp6c исчез.
    по каким-то причинам провайдер не выдает адрес на WAN интерфейс с IAID равному 1 (ранее был равен IAID-у перфикса), а dhcp6c клиент со включенным rapid-commit не умеет корректно это обрабатывать и уходит в постоянный цикл перезапросов без увеличения таймаута.
    в общем, мигрируем на новый odhcp6c клиент с корректной отработкой подобных ситуаций.
    http://asus.vectormm.net/rtn/7533/

  7. #382
    Quote Originally Posted by theMIROn View Post
    в общем, мигрируем на новый odhcp6c клиент с корректной отработкой подобных ситуаций.
    http://asus.vectormm.net/rtn/7533/
    Доброго, еще раз.
    Прошил r7533,
    Code:
    cat /.version
    1.9.2.7-rtn-r7533M-gf162782
    В логе опять
    Code:
    Jan  1 03:00:09 dhcp client: bound IP : 10.236.36.79 from 10.236.32.1
    Jan  1 03:00:09 dhcp6c[299]: status code for identity association-1: no addresses
    Jan  1 03:00:10 dhcp6c[299]: status code for identity association-1: no addresses
    Jan  1 03:00:10 dnsmasq-dhcp[222]: DHCPv6 stateless on 2a02:2168:3fc6:da00::, constructed for br0
    Jan  1 03:00:10 dnsmasq-dhcp[222]: DHCPv4-derived IPv6 names on 2a02:2168:3fc6:da00::, constructed for br0
    Jan  1 03:00:10 dnsmasq-dhcp[222]: router advertisement on 2a02:2168:3fc6:da00::, constructed for br0
    Oct  9 00:00:14 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:15 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:16 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:17 kernel: DROP IN=vlan2 OUT= MACSRC=00:1a:f0:48:14:94 MACDST=10:bf:48:e6:19:3f MACPROTO=0800 SRC=77.37.251.33 DST=10.236.36.79 LEN=69 TOS=0x00 PREC=0x00 TTL=56 ID=62444 PROTO=UDP SPT=53 DPT=31436 LEN=49 
    Oct  9 00:00:17 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:18 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:19 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:20 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:21 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:22 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:22 ntp client: Synchronizing time with pool.ntp.org...
    Oct  9 00:00:23 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:24 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:25 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:26 dhcp6c[299]: status code for identity association-1: no addresses
    Oct  9 00:00:27 dhcp6c[299]: status code for identity association-1: no addresses
    В процессах dhcp6c
    Code:
    ps
      PID USER       VSZ STAT COMMAND
        1 admean    1412 S    /sbin/init
        2 admean       0 SW<  [kthreadd]
        3 admean       0 SW<  [ksoftirqd/0]
        4 admean       0 SW<  [events/0]
        5 admean       0 SW<  [khelper]
       27 admean       0 SW<  [kblockd/0]
       60 admean       0 SW   [pdflush]
       61 admean       0 SW   [pdflush]
       62 admean       0 SW<  [kswapd0]
      113 admean       0 SW<  [mtdblockd]
      202 admean    1392 S    syslogd -m 0 -O /tmp/syslog.log -S -D -l 7 -b 1
      204 admean    1392 S    klogd
      206 admean     832 S    eapd
      208 admean    1024 S    nas
      213 admean    1392 S    telnetd
      215 admean    1068 S    dropbear
      217 admean     980 S    httpd vlan2
      222 nobody     968 S    dnsmasq
      227 admean     892 S    lld2d br0 eth1
      237 admean       0 SW<  [khubd]
      299 admean    1408 R    /sbin/dhcp6c -D LL -v vlan2
      323 admean     676 S    /usr/sbin/igmpproxy /etc/igmpproxy.conf
      332 admean     844 S    miniupnpd
      333 admean    1396 S    /sbin/udhcpc -i vlan2 -p /var/run/udhcpc0.pid -b -O33 -O121 -O249
      335 admean    1408 S    watchdog
      338 admean     776 S    infosrv br0
      736 admean    1096 R    dropbear
      763 admean    1400 R    -sh
      767 admean    1396 R    ps
    Ничего не понял, где же odhcp6c?

    EDIT 2016.10.09
    Сбросил в дефолт, загрузил старые настройки, донастроил IPv6, залил flashfs - вроде заработало
    В сислоге - тишина, IPv6 тесты проходит, буду наблюдать дальше.
    И все равно не понял, почему в процессах dhcp6c.
    Last edited by ff0255; 09-10-2016 at 10:13.
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

  8. #383
    Quote Originally Posted by ff0255 View Post
    Доброго, еще раз.
    Прошил r7533,
    Code:
    cat /.version
    1.9.2.7-rtn-r7533M-gf162782
    Ничего не понял, где же odhcp6c?
    похоже там криво собрано без учета нового конфига, собрал сам:
    http://www.entware.net/binaries/wl500g/

  9. #384
    Quote Originally Posted by theMIROn View Post
    похоже там криво собрано без учета нового конфига, собрал сам:
    http://www.entware.net/binaries/wl500g/
    Очередного доброго.
    Что-то не шьётся r7534, нажимаю upload, жду ~20мин, никакой реакции, передергиваю питание => загружается старая r7533.
    Хотя меня r7533 c dhcp6c вполне устраивает: в лог не флудит, ipv6 работает (работает-не трогай)
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

  10. #385

    ipv6 ra interval

    1.9.2.7-rtn-r7593-g0c22b0e
    Р*азбирался почему андроидофон плохо СЃРїРёС‚ РїСЂРё подключённом WI-Fi (куча wakelock-РѕРІ).
    Не понял почему по умолчанию в dnsmasq.conf
    Code:
    ra-param=br0,10,1800
    То есть Router Advertisement interval =10 секунд (!), что подтвердилось показаниями tcpdump.
    Увеличил до 1800
    Code:
    /usr/local/etc/dnsmasq.conf
    ra-param=br0,1800,1800
    Ipv6 работает, тел. спит гораздо лучше (wakelock-ов меньше).
    Вопрос почему разрабы поставили такое маленькое значение?
    WL500gpv.1@1.9.2.7-d-r3591(отдыхает)/RT-N16@1.9.2.7-rtn-r7593(работает

Page 26 of 26 FirstFirst ... 16242526

Similar Threads

  1. Настройка IPv6 в WL-500gP
    By icCE in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 147
    Last Post: 28-12-2019, 19:06
  2. Настройка iodine на роутере Asus
    By Игорь in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 12
    Last Post: 25-01-2016, 10:27
  3. Настройка ASUS WL-520gU
    By sadman in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 408
    Last Post: 04-01-2012, 14:42
  4. IPv6 Support
    By wpte in forum WL-500gP Tutorials
    Replies: 186
    Last Post: 30-11-2011, 21:16
  5. HOWTO use your WL-500g as IPv6 router
    By phedny in forum WL-500g/WL-500gx Tutorials
    Replies: 8
    Last Post: 17-02-2008, 08:19

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •