Quote Originally Posted by Antiloop
i think something else is not correct

try using static ip adresses to locate your problem (for clients too ofcourse)
try to ping al AP's to see if you can reach them at all, also make sure that EVERY AP has another IP address but in the same range
You are right. Test setup:
AP1 (with wired Ethernet): 10.14.54.243
AP2 (no wire): 10.14.54.141
PC: 10.14.54.140

Physical setup:
PC <----(about 1 meter)---> AP2 <--(about 10 meters)---> AP1

I first power up AP1 and connect PC to wireless network. It works. I power up AP2, and everything still works.

I then disconnect PC from wireless network, and reconnect. The PC now seems to associate with AP2, but network access is not working.

From PC, I can ping AP2, but not AP1.

Any ideas?


Thanks,
Einar