Results 1 to 3 of 3

Thread: 7 port usb hub - says only 4 ports detected

  1. #1

    7 port usb hub - says only 4 ports detected

    I have a wl500w with olegs

    I added a 7 port usb hub. It's working fine with 3 usb hard drives connected.

    But I get this in dmesg:
    hub.c: new USB device 01:03.2-2.4, assigned address 7
    hub.c: USB hub found
    hub.c: 4 ports detected

    And when try to connect a usb 2.0 printer (Samsung ml2510), I still get the same in dmesg.

    But I then see this for the printer:
    hub.c: new USB device 01:03.2-2.4.2, assigned address 10
    usb.c: not enough configurations
    usb.c: unable to get device 10 configuration (error=-22)

    So I have 5 devices connected (1 internal, 4 external). But it's telling me the hub only has 4 ports.

    Does it only support 4 devices?

  2. #2
    Join Date
    Dec 2007
    The Netherlands - Eindhoven
    printers and webcams should be connected to the router directly for best results

    Also, you might want to download the "new" oleg firmware which might have some fixes for this:

    I never ended up connecting 7 devices to my hub, but it seems to work with my harddrive connected to the 7th port

  3. #3
    Thanks. Putting the printer on the router itself seems to have been the problem.

Similar Threads

  1. linuxrc bug? - WL-500g not booting from usb drive with hub
    By daniel632 in forum WL-500g Custom Development
    Replies: 5
    Last Post: 14-03-2012, 15:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts