7 port usb hub - says only 4 ports detected

[oggie]

I have a wl500w with olegs 1.9.2.7-10

I added a 7 port usb hub. It's working fine with 3 usb hard drives connected.

But I get this in dmesg:
hub.c: new USB device 01:03.2-2.4, assigned address 7
hub.c: USB hub found
hub.c: 4 ports detected

And when try to connect a usb 2.0 printer (Samsung ml2510), I still get the same in dmesg.

But I then see this for the printer:
hub.c: new USB device 01:03.2-2.4.2, assigned address 10
usb.c: not enough configurations
usb.c: unable to get device 10 configuration (error=-22)

So I have 5 devices connected (1 internal, 4 external). But it's telling me the hub only has 4 ports.

Does it only support 4 devices?

[wpte]

printers and webcams should be connected to the router directly for best results

Also, you might want to download the "new" oleg firmware which might have some fixes for this: http://code.google.com/p/wl500g/

I never ended up connecting 7 devices to my hub, but it seems to work with my harddrive connected to the 7th port

[oggie]

Thanks. Putting the printer on the router itself seems to have been the problem.