Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.
First of all, you find as annex the syslog made with CR4 from boot up to time after a successful print.Originally Posted by Oleg
In order to document the problem I have installed again CR5. You find as further annexes:
1) Syslog with CR5 without fix: from boot up to time after print of 2 documents (both documents unsuccessful)
2) Syslog with CR5 with fix : from boot up to time after print of 4 documents:
first doc: short doc printed with basic driver: successful
second doc: XP printer test page with basic driver: partly unsuccessful
third doc: short doc with HP driver: unsuccessful
fourth doc: XP printer test page with HP driver: unsuccessful
Would other infos be useful for you before i go back again to CR4 installation?
Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.
Sorry, but WL500g-1.9.2.7-5a-pre1.trx do not work for my, but different than WL500g-1.9.2.7-5.trx. Look like some missing/corrupted/extra chars are sent to the printer. I just do the "Print Test Page" in Windows XP, so I can't provide further details, sorry.Originally Posted by Oleg
FIB, it should work for you, as I've removed -b. Please try with trick again (should not help if you've flashed right firmware).
Hello Oleg, Thanks for your efforts to solve our printer problems.Originally Posted by Oleg
I have installed the 5a-pre1 version.
In my case I register unfortunately no progress. In raw modus the printer does not print anything more correctly. Same situation with the basic driver or with the HP driver.
As I need to use the print server, I tried to switch to the LPR modus. The result is positive. The printer is working correctly. (I don't know if it was also the case with the original CR5 version; I did not test it earlier). So at this time I will stay with your last version and print with the LPR modus. In waiting and hope that a solution is once available for the RAW modus. I will also inform you if the other functions of 5a-pre1 are workink correctly.
Hi OlegOriginally Posted by Oleg
I try the firmware, and the printer (hp890), print all the text, and a lot of other characters, my canon printer (Pixma4000), connected to the usb port, can't print at all.
With the firmware 1.9.2.7-5, the Canon printer, prints one good print, than I have to reboot, to get the printer work again.
If I after a reboot print one one the HP printer, then I can't print one the canon after this
Sorry for my english.
/Emand
The trick:Originally Posted by Olegdo not do any difference on (my ) WL500g-1.9.2.7-5a-pre1.trx.Code:killall p910nd p910nd -f /dev/usb/lp0 0
I need a system logs from unsuccessful printings. Please post them.
From WL500g-1.9.2.7-5a-pre1.trx no trick.Originally Posted by Oleg
Hi Oleg,Originally Posted by Oleg
In the attachment the needed syslog (from boot time up to unsuccessful printing in RAW.
I have maked a save in the syslog windows in the web interface, im not sure that this is log file you mean.Originally Posted by Oleg
(5a-Pre1)
/Emand
Last edited by Emand; 10-05-2005 at 21:32.
Oleg,Originally Posted by Oleg
I put your new firmware in the wl-500g. (5a-pre1)
Printing to my parallel port got worse, printing the same exel file as yesterday, gives a lot of corrupted text/pages.
thanks for your effort.
Hans
Sorry, attachment was missing...Originally Posted by kdudl
Guys, yet another attempt. Fixed a stupid error in -pre1, do not use it anymore. Try this one and let me know if you are happy now.
It seems that both of my printers are working all right now.Originally Posted by Oleg
Thanks
/Emand