Firmware v1.9.2.7 CR5, updated: v1.9.2.7 CR5a [Oleg]

[Oleg]

Hi Guys,

I got trouble with my USB printer. It just print incomplete jobs. No problems on WL500g-1.9.2.7-4.trx.

From the System Log:

Jan 1 01:00:11 kernel: printer.c: usblp0 Device ID string [117/max 1552]='MFG:Canon;CMD:BJL,BJRaster3,BSCCe;SOJ:TXT01;MDL: i560;CLS:PRINTER;DES:Canon i560;VER:1.06;STA:10;POS:000000FFFFFFFF;'
Jan 1 01:00:11 kernel: printer.c: Parsing USBLPID...
..
May 8 10:38:13 kernel: printer.c: usblp0 Device ID string [117/max 1552]='MFG:Canon;CMD:BJL,BJRaster3,BSCCe;SOJ:TXT01;MDL: i560;CLS:PRINTER;DES:Canon i560;VER:1.06;STA:10;POS:000000FFFFFFFF;'
May 8 10:38:13 kernel: printer.c: Parsing USBLPID...
May 8 10:38:38 p9100d[69]: Connection from 192.168.1.72 port 1271 accepted

Btw. Samba is OK now.

Could you please try disabling "Bidirectional communications" in the printer properties of your windows box?

[Oleg]

Terracam Pro (OV518) not Working, green Picture

May  8 12:41:14 USB webcam: webcam capture no frame

(Repeating)

It should work, try repluging cam and rebooting router.

- Can you make LPR, Waveserver, Jetdirekt printing jobs and maybe infosvr disable over web interface ?

Probably.

[FIB]

Already done that - no change, sorry.

[Oleg]

Already done that - no change, sorry.

btw, do you use RAW printing?

[FIB]

Yes, RAW port 9100

[Oleg]

Yes, RAW port 9100

Start telnet/ssh session to router and type this:

killall p910nd
p910nd -f /dev/usb/lp0 0

And try printing again.

[FIB]

That makes me able to print again, great. Can I insert the codelines in post-boot to make it a permanent fix for me?

[Oleg]

yes, sure. as seems drivers do not expect bidirectional communication, so printing hangs at some point.

I would like to know if anyone has any positive effect with bidirectional RAW printing. Otherwise I will remove it, as it only causes problems as seems.

[FIB]

Anyway, thanks for the trick - and firmware.

[rej]

Old upnp entries should not have any effect then upnp is disabled

What is ment by this? Is this a fix for the bug where upnp ports are never closed?

BTW, Thanks for the good work!

BR, René

[Antiloop]

yes, sure. as seems drivers do not expect bidirectional communication, so printing hangs at some point.

I would like to know if anyone has any positive effect with bidirectional RAW printing. Otherwise I will remove it, as it only causes problems as seems.

I'm unable to test currently, hp lost my printer when repairing.. still waiting for a new one

[Oleg]

What is ment by this? Is this a fix for the bug where upnp ports are never closed?

BTW, Thanks for the good work!

BR, René

Well, it disables using of old upnp rules if you've disabled upnp in the router.

[Oleg]

I'm unable to test currently, hp lost my printer when repairing.. still waiting for a new one

With my hp dj 3420 I've seen bidir communications, but windows still does not report any usefull info, such as ink level...

[WlanMan]

It should work, try repluging cam and rebooting router.

Nope. Tried several times. Had this isue with R4 also, green picture but i think no syslog entrys. Just had no time to tell here.
The Cam worked on a x86 linux and windows box, so i am curious what the problem can be on 500g ...

Please, can you tell me what the wlan_update tool does, i started it acidentely (no --help parameter check ) and now have afterburner supported. I know it patches something in the chipset eeprom, is this possible harmfull and is it reversible ?
What does this mean it maybe fixes the range problem ?

One last, is the output of "free" meaningfull in any way ? Free mem value changes in a way that seems strange when loading and killing software.
Also samba is not working, deamons die without notice but i may have missed some configuration point.

Greets
Nice release after all.

[Jean-Fabrice]

With my hp dj 3420 I've seen bidir communications, but windows still does not report any usefull info, such as ink level...

Same for me with a Canon i865.