Firmware v1.9.2.7 CR5, updated: v1.9.2.7 CR5a [Oleg]

[tomilius]

Gee, I'm flooding! But I have some more stuff to mention...

Another 1.9.2.7-5a thing... the Makefile uses WL500gx as the default model, which caused a bit of a headache. Maybe that was already stated, but this probably wasn't....

iplimit cannot be used as a module... it causes problems and cannot be loaded. This is a known issue--I had it before myself...

[admin@AsusRouter /]$ insmod ipt_iplimit.o
Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_iplimit.o
insmod: unresolved symbol ip_conntrack_find_get

So hopefully in the next version iplimit (Networking options -> IP: Netfilter Configuration -> Connections/IP limit match support) can be made built-in (or it won't work at all), and Networking options -> QoS and/or fair queueing -> Firewall based classifier can at least be compiled as a module (though I don't see how it could hurt having it built-in either).

And while I'm rambling, it might be nice if "length" (LENGTH match support) could be compiled as a module also... It helps with some traffic shaping stuff (looked up "iptables tricks" on Google... or "iptables tips," one of those).

Thanks!

[Dark_Zen]

Since a view days something strange occurs.
While running Azureus, browsing etc the Wan connection dies.
Lan is working perefectly. When i log on @ router and go tot status and logs and check status is see that the link status is connected.
But internet doesnt work. When 1 press 'connect' it works again!

I'm using Oleg's 1.9.2.7-5a firmware. ISP= Chello Modem+Motorola SB4200

I thought the 'wan port dies' problem should have been fixed with this firmware?

[Oleg]

Gee, I'm flooding! But I have some more stuff to mention...

Done everything, except default model. Buy deluxe ASAP

[Tomekk]

Well im here to ask and check if this behavior or bug is provoked by this firmware.

Since i changed to 1.9.2.7 CR5 Olegs... im having problems connecting to FTP's.
So the behavior is:

1st - On Lan side when i connect to any ftp there is no problem at all.

2nd -When i connect to a remote ftp(WAN) i cant transfer files at all. The file transfer will be stuck for infinite time.

3rd - In other hand when i connect to a remote ftp(WAN) withoud PASSIVE mode... im able to transfer files... but sometime one file or other gets stuck. After sometime he starts to transfer again.

Note: Sorry but i didn't put any log files... because the WL500g doesn't record anything about this in web interface.

Please check if this behavior is from this firmware because when i used 1.8.2.4 and many other firmwares i never face this problem.

Thank you.

[Oleg]

Well im here to ask and check if this behavior or bug is provoked by this firmware.

Since i changed to 1.9.2.7 CR5 Olegs... im having problems connecting to FTP's.
So the behavior is:

1st - On Lan side when i connect to any ftp there is no problem at all.

2nd -When i connect to a remote ftp(WAN) i cant transfer files at all. The file transfer will be stuck for infinite time.

3rd - In other hand when i connect to a remote ftp(WAN) withoud PASSIVE mode... im able to transfer files... but sometime one file or other gets stuck. After sometime he starts to transfer again.

Do you use pppoe?

[Tomekk]

Yes i use pppoe connection (ADSL pppoe).

My settings for pppoe in WL500g are:

Idle Disconnect Time in seconds(option): 0

Tx Only: Uncheck

Enable PPPoE Relay?: No

MTU: Default Value

MRU: Default Value

All other fields are empty since its only required by special ISP's.

Note:In "Special Requirement from ISP" all fields are empty for the same reason.

[Oleg]

Yes i use pppoe connection (ADSL pppoe).

This bug is fixed already, wait for next firmware release.

[Tomekk]

Ok thank you. I will wait for the next release