Hi,
Here is a pound.mk which seems to work.
What I change is :
- disable libtool dependency as I do not know why you need it
- create a small patch for Makefile.in (see it at then end this post) since default generated Makefile wants to build objects using host cc.
- discard the use of the provided "install" macro in the Makefile since it does not support "prefix" properly
This pound builds correctly. Let me know if it is correct for you.
Code:
###########################################################
#
# pound
#
###########################################################
# You must replace "pound" and "POUND" with the lower case name and
# upper case name of your new package. Some places below will say
# "Do not change this" - that does not include this global change,
# which must always be done to ensure we have unique names.
#
# POUND_VERSION, POUND_SITE and POUND_SOURCE define
# the upstream location of the source code for the package.
# POUND_DIR is the directory which is created when the source
# archive is unpacked.
# POUND_UNZIP is the command used to unzip the source.
# It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
#
# You should change all these variables to suit your package.
# Please make sure that you add a description, and that you
# list all your packages' dependencies, seperated by commas.
#
# If you list yourself as MAINTAINER, please give a valid email
# address, and indicate your irc nick if it cannot be easily deduced
# from your name or email address. If you leave MAINTAINER set to
# "NSLU2 Linux" other developers will feel free to edit.
#
POUND_SITE=http://www.apsis.ch/pound/
POUND_VERSION=1.9.1
POUND_SOURCE=Pound-$(POUND_VERSION).tgz
POUND_DIR=Pound-$(POUND_VERSION)
POUND_UNZIP=zcat
POUND_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
POUND_DESCRIPTION=Describe pound here.
POUND_SECTION=net
POUND_PRIORITY=optional
POUND_DEPENDS=openssl
POUND_SUGGESTS=
POUND_CONFLICTS=
#
# POUND_IPK_VERSION should be incremented when the ipk changes.
#
POUND_IPK_VERSION=1
#
# POUND_CONFFILES should be a list of user-editable files
POUND_CONFFILES=/opt/etc/pound.conf
#
# POUND_PATCHES should list any patches, in the the order in
# which they should be applied to the source code.
#
POUND_PATCHES=$(POUND_SOURCE_DIR)/Makefile.in.patch
#
# If the compilation of the package requires additional
# compilation or linking flags, then list them here.
#
POUND_CPPFLAGS=
POUND_LDFLAGS=
#
# POUND_BUILD_DIR is the directory in which the build is done.
# POUND_SOURCE_DIR is the directory which holds all the
# patches and ipkg control files.
# POUND_IPK_DIR is the directory in which the ipk is built.
# POUND_IPK is the name of the resulting ipk files.
#
# You should not change any of these variables.
#
POUND_BUILD_DIR=$(BUILD_DIR)/pound
POUND_SOURCE_DIR=$(SOURCE_DIR)/pound
POUND_IPK_DIR=$(BUILD_DIR)/pound-$(POUND_VERSION)-ipk
POUND_IPK=$(BUILD_DIR)/pound_$(POUND_VERSION)-$(POUND_IPK_VERSION)_$(TARGET_ARCH).ipk
#
# This is the dependency on the source code. If the source is missing,
# then it will be fetched from the site using wget.
#
$(DL_DIR)/$(POUND_SOURCE):
$(WGET) -P $(DL_DIR) $(POUND_SITE)/$(POUND_SOURCE)
#
# The source code depends on it existing within the download directory.
# This target will be called by the top level Makefile to download the
# source code's archive (.tar.gz, .bz2, etc.)
#
pound-source: $(DL_DIR)/$(POUND_SOURCE) $(POUND_PATCHES)
#
# This target unpacks the source code in the build directory.
# If the source archive is not .tar.gz or .tar.bz2, then you will need
# to change the commands here. Patches to the source code are also
# applied in this target as required.
#
# This target also configures the build within the build directory.
# Flags such as LDFLAGS and CPPFLAGS should be passed into configure
# and NOT $(MAKE) below. Passing it to configure causes configure to
# correctly BUILD the Makefile with the right paths, where passing it
# to Make causes it to override the default search paths of the compiler.
#
# If the compilation of the package requires other packages to be staged
# first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
#
$(POUND_BUILD_DIR)/.configured: $(DL_DIR)/$(POUND_SOURCE) $(POUND_PATCHES)
$(MAKE) openssl-stage
rm -rf $(BUILD_DIR)/$(POUND_DIR) $(POUND_BUILD_DIR)
$(POUND_UNZIP) $(DL_DIR)/$(POUND_SOURCE) | tar -C $(BUILD_DIR) -xvf -
cat $(POUND_PATCHES) | patch -d $(BUILD_DIR)/$(POUND_DIR) -p1
mv $(BUILD_DIR)/$(POUND_DIR) $(POUND_BUILD_DIR)
(cd $(POUND_BUILD_DIR); \
$(TARGET_CONFIGURE_OPTS) \
CPPFLAGS="$(STAGING_CPPFLAGS) $(POUND_CPPFLAGS)" \
LDFLAGS="$(STAGING_LDFLAGS) $(POUND_LDFLAGS)" \
./configure \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_TARGET_NAME) \
--target=$(GNU_TARGET_NAME) \
--with-ssl=$(STAGING_DIR)/opt \
--prefix=/opt \
--disable-nls \
--disable-static \
)
touch $(POUND_BUILD_DIR)/.configured
pound-unpack: $(POUND_BUILD_DIR)/.configured
#
# This builds the actual binary.
#
$(POUND_BUILD_DIR)/.built: $(POUND_BUILD_DIR)/.configured
rm -f $(POUND_BUILD_DIR)/.built
$(MAKE) -C $(POUND_BUILD_DIR)
touch $(POUND_BUILD_DIR)/.built
#
# This is the build convenience target.
#
pound: $(POUND_BUILD_DIR)/.built
#
# If you are building a library, then you need to stage it too.
#
$(POUND_BUILD_DIR)/.staged: $(POUND_BUILD_DIR)/.built
rm -f $(POUND_BUILD_DIR)/.staged
$(MAKE) -C $(POUND_BUILD_DIR) DESTDIR=$(STAGING_DIR) install
touch $(POUND_BUILD_DIR)/.staged
pound-stage: $(POUND_BUILD_DIR)/.staged
#
# This rule creates a control file for ipkg. It is no longer
# necessary to create a seperate control file under sources/pound
#
$(POUND_IPK_DIR)/CONTROL/control:
@install -d $(POUND_IPK_DIR)/CONTROL
@rm -f $@
@echo "Package: pound" >>$@
@echo "Architecture: $(TARGET_ARCH)" >>$@
@echo "Priority: $(POUND_PRIORITY)" >>$@
@echo "Section: $(POUND_SECTION)" >>$@
@echo "Version: $(POUND_VERSION)-$(POUND_IPK_VERSION)" >>$@
@echo "Maintainer: $(POUND_MAINTAINER)" >>$@
@echo "Source: $(POUND_SITE)/$(POUND_SOURCE)" >>$@
@echo "Description: $(POUND_DESCRIPTION)" >>$@
@echo "Depends: $(POUND_DEPENDS)" >>$@
@echo "Suggests: $(POUND_SUGGESTS)" >>$@
@echo "Conflicts: $(POUND_CONFLICTS)" >>$@
#
# This builds the IPK file.
#
# Binaries should be installed into $(POUND_IPK_DIR)/opt/sbin or $(POUND_IPK_DIR)/opt/bin
# (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
# Libraries and include files should be installed into $(POUND_IPK_DIR)/opt/{lib,include}
# Configuration files should be installed in $(POUND_IPK_DIR)/opt/etc/pound/...
# Documentation files should be installed in $(POUND_IPK_DIR)/opt/doc/pound/...
# Daemon startup scripts should be installed in $(POUND_IPK_DIR)/opt/etc/init.d/S??pound
#
# You may need to patch your application to make it use these locations.
#
$(POUND_IPK): $(POUND_BUILD_DIR)/.built
rm -rf $(POUND_IPK_DIR) $(BUILD_DIR)/pound_*_$(TARGET_ARCH).ipk
install -d $(POUND_IPK_DIR)/opt/etc/
install -d $(POUND_IPK_DIR)/opt/sbin/
install -m 555 $(POUND_BUILD_DIR)/pound $(POUND_IPK_DIR)/opt/sbin/pound
$(STRIP_COMMAND) $(POUND_IPK_DIR)/opt/sbin/pound
install -d $(POUND_IPK_DIR)/opt/man/
install -d $(POUND_IPK_DIR)/opt/man/man8/
install -m 644 $(POUND_BUILD_DIR)/pound.8 $(POUND_IPK_DIR)/opt/man/man8/pound.8
install -m 644 $(POUND_SOURCE_DIR)/pound.conf $(POUND_IPK_DIR)/opt/etc/pound.conf
install -d $(POUND_IPK_DIR)/opt/etc/init.d
install -m 755 $(POUND_SOURCE_DIR)/rc.pound $(POUND_IPK_DIR)/opt/etc/init.d/SXXpound
$(MAKE) $(POUND_IPK_DIR)/CONTROL/control
install -m 755 $(POUND_SOURCE_DIR)/postinst $(POUND_IPK_DIR)/CONTROL/postinst
install -m 755 $(POUND_SOURCE_DIR)/prerm $(POUND_IPK_DIR)/CONTROL/prerm
echo $(POUND_CONFFILES) | sed -e 's/ /\n/g' > $(POUND_IPK_DIR)/CONTROL/conffiles
cd $(BUILD_DIR); $(IPKG_BUILD) $(POUND_IPK_DIR)
#
# This is called from the top level makefile to create the IPK file.
#
pound-ipk: $(POUND_IPK)
#
# This is called from the top level makefile to clean all of the built files.
#
pound-clean:
-$(MAKE) -C $(POUND_BUILD_DIR) clean
#
# This is called from the top level makefile to clean all dynamically created
# directories.
#
pound-dirclean:
rm -rf $(BUILD_DIR)/$(POUND_DIR) $(POUND_BUILD_DIR) $(POUND_IPK_DIR) $(POUND_IPK)
Makefile.in.patch (to be placed in sources/pound/Makefile.in.patch) :
Code:
--- Pound-1.9.1/Makefile.in.orig 2005-09-10 17:34:01.580000000 -0400
+++ Pound-1.9.1/Makefile.in 2005-09-10 18:03:58.840000000 -0400
@@ -25,6 +25,7 @@
# EMail: roseg@apsis.ch
#
# $Id: Makefile.in,v 1.9 2005/06/01 15:01:54 roseg Rel roseg $
+CC=@CC@
CFLAGS=-DF_CONF=\"$(F_CONF)\" @CFLAGS@ @CPPFLAGS@
JF