Please have anyone compiled affix or BlueZ for new firmware.Thanks
Please have anyone compiled affix or BlueZ for new firmware.Thanks
imho,
bt should not be in same room with wifi.
because, it use (almost) same frequency as wifi and will cause interferences.
i had an experience where i try to connect imac with bt keyboard+mouse
to a wireless router in the same room in about 2 meter distance.
and, it does NOT connect!
i have to try many frequency/channel and finally found a channel that wifi can connect.
even that it's connected, when i put the imac to another room across the house
(about 30meters) the signal drops significantly.
usually at this distance the signal should be very strong.
especially, i was using senao with 200mw power.
at another place (with no bt) i test it over 50m still got strong signal.
aztech adsl router -> asus wl500g w/ 1.9.2.7-5a fw -> linksys wrt54g w/ dd-wrt & hyperwrt as WDS
http://www.ngobrol.com
BT and WiFi used the same frequency it's correct but it could be in the same room. I use BT class I II together with WiFi without problems.
I use BT v1.2 (SiliconWave), which is little bit interference resistant, because use another type of modulation.