I did it exactly as your howto says, but without success - I get this from sane-find-scanner:
Code:
found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:001:002
scanimage -L :
Code:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I have an Epson DX 4400 scanner/printer combo, printing (somehow - printer mustn't be in standby mode, otherwise > printer shutdown) works...
EDIT:
here is the output of xinetd -d
Code:
10/1/15@14:21:50: DEBUG: 132 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=15]
10/1/15@14:21:50: ERROR: 132 {find_next_entry} missing service keyword [file=/opt/etc/xinetd.d/saned] [line=11]
10/1/15@14:21:50: ERROR: 132 {service_fill} Port not specified and can't find service: saned with getservbyname
Service defaults
Instances = 60
CPS = max conn:25 wait:30
Bind = All addresses.
Only from: localhost(HOST) 192.168.1.0/255.255.255.0(NET)
No access: No blocked sites
Logging to syslog. Facility = authpriv, level = info
Log_on_success flags = HOST PID
Log_on_failure flags = HOST
10/1/15@14:21:50: DEBUG: 132 {cnf_start_services} mask_max = 0, services_started = 0
10/1/15@14:21:50: CRITICAL: 132 {init_services} no services. Exiting...
EDIT 2
I made the xinetd + saned running (well, I'm so brilliant that I forgot to chmod +x the post-boot and other scripts), thus eliminated the problem in 1st EDIT, but outputs from sane-find-scanner and scanimage -L remains unchanged. I tried commenting the epson2 backend and using epson, but no improvement. Is there a compiled epkowa backend available?