Hi,
I now have a solution for hp psc-1510.
You have to install package hplip. I compiled it on the Asus and you can download the ipkg package here.
Attention: Do not use the ipkg-package from the ipkg-server. It will not work with sane-backends-wl500.
After you downloaded the file, unpack and copy it anywhere at the router. Install it with the following command:
Code:
ipkg install /your/storage/location/hplip-wl500gp_2.8.9-1_for_AsusWL500gP_mipsel.ipk
Finally you have to edit a sane-config-file. Open the following file:
Code:
vi /opt/etc/sane.d/dll.conf
and paste the following entry at the end of the file:
Attention: My new compiled version (available at rapidshare from 2009-09-03) of sane-backends-wl500 already has this entry. With this command, you can check if the entry is already in:
Code:
grep "hpaio" /opt/etc/sane.d/dll.conf
If its not in (the output is empty), open the file and paste the following:
Please give a short acknowledgment if this works for you!
I will take the hplip into the howto, because many hp-scanner need this lib.
Regards
Oliver
Reply With Quote
