Page 12 of 13 FirstFirst ... 210111213 LastLast
Results 166 to 180 of 195

Thread: [HowTo] Sane Scanner-Server with XSane Frontend

  1. #166

    Can HP Officejet J5788 all-in-one scanner use SANE?

    I have a HP Officejet J5788 scanner. I want sharing it on openwrt box.

    openwrt firmware: KAMIKAZE (bleeding edge, r19957)
    scanner: HP Officejet J5788 all-in-one
    installed module:
    hplip - 3.9.12-1
    sane-backends - 1.0.20-2
    sane-frontends - 1.0.20-2
    sane-libs - 1.0.20-2

    root@OpenWrt:~# scanimage -L
    device `hpaio:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1' is a Hewlett-Packard Officejet_J5700_series all-in-one

    root@OpenWrt:~# scanimage -T
    scanimage: open of device hpaio:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1 failed: Device busy

    root@OpenWrt:~#logread
    Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/dot4.c 231: unable to read Dot4ReverseReply header: Resource temporarily unavailable bytesRead=0
    Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20 , revision=1
    Jan 1 00:48:27 OpenWrt user.warn syslog: failed to open scan channel: scan/sane/hpaio.c 657
    Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 327: device_cleanup: device uri=hp:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1
    Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 339: device_cleanup: close device dd=1...
    Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 341: device_cleanup: done closing device dd=1

    Who can help me? Thanks

  2. #167
    Sane-backends-1.0.22 has been released a few weeks ago. Anyone knows when it will be available via ipkg?

  3. #168
    Quote Originally Posted by electropanda View Post
    Victory!
    I can scan by HP PhotoSmart c5283 now.
    I intently viewed the forum and solution was found:
    http://wl500g.info/showpost.php?p=189850&postcount=108
    I had the same symptoms as described in http://wl500g.info/showthread.php?t=20098.
    I changed dbus from 1.2.16-1 to 1.1.1-3.

    Thus I came to current working condition through installing the following packages:
    libusb - 0.1.12-2
    libtiff - 3.9.4-1
    libjpeg - 6b-3
    libieee1284 - 0.2.11-1
    sane-backends - 1.0.21-1
    cups - 1.4.4-1
    dbus - 1.1.1-3 (from http://wl500g.info/showpost.php?p=202794&postcount=12)
    hplip - 3.9.2-1 (from http://wl500g.info/showpost.php?p=199955&postcount=119)


    Else.
    I had to add one line into post-boot script.
    Code:
    rm /opt/var/run/dbus/*
    During the router starting /opt/etc/init.d/S20dbus do not examine whether daemon has already started or not.
    If there is PID file in /opt/var/run/dbus/ S20dbus suppose daemon has already started. To be sure it actually starts we need to remove PID file before S20dbus is execute.
    (Idea was peeped here)


    Many thanks to Oliver for the How-To (and for XSane too)!
    This works for me too (HP PSC 1510) but I noticed that when I start Xsane, the printer disconnect herself (kernel: printer.c: usblp0: removed), so I won't be able to print until I reboot or disconnect and connect the printer again. Any solution?
    I also would like to have xsane or similar on Android? Is it possible?

  4. #169

    Help needed for Brother MFC-7340

    Hi all

    I had difficulties in figuring out how to make the scanner work over the network.

    Router: ASUS RT-N16
    Firmware: Tomato v1.28.9054 MIPSR2-beta K26 USB Ext
    I installed all the packages mentioned in the thread but with no luck to get the scanner working

    sane-find-scanner could find the scanner
    found USB scanner (vendor=0x04f9, product=0x01e7) at libusb:001:003

    but scanimage -L could not identify the scanner:
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).

    I found the drivers at brother website but they are in .deb and .rpm format and could not be installed

    Any suggestions will be appreciated. Thank you!

  5. #170

    Thumbs down SANE + HPLIP + Tomato + F300 hangs with large scan areas

    SANE + HPLIP 3.11.3a-1 + Tomato v1.28.8754 ND USB Std + Hp Deskjet F380 (F300 series) only works with small scan areas.

    The problem is also related to DPIs, but I can't manage to get one full page with 75 DPI, which is the lowest possible.

    If i get a small area (around 1/4 of the full glass) it will scan at some times, if i increase the DPI, it won't scan. I will get an Error during device I/O, even if I try to scan directly from scanimage.

    I would like to have the scanner function of my AiO printer working, at least to scan the full glass in low resolutions (<=150).

    I can't load previews as well.

    I thought it could be a memory problem, since it does scan small areas, but it is not, in fact, the memory usage doesn't increase much during the scan, I even created a 128MB swap partition in my flash drive (was afraid of doing so, since it would wear it quickly, will probably remove now), but it didn't change anything, it still doesn't scan with more than 55% of the router's memory (16MB) free and more than 97% of the swap memory free.

    I would also like to know where else should I look for a solution to this issue, already googled for hours and hours... Maybe someone could recommend me another forum or place to ask for help.

    Thanks all in advance for your effort in helping me out,

    Igor Campos

    Here are my configuration files:

    /opt/etc/sane.d/dll.conf
    Code:
    hpaio
    /opt/etc/sane.d/saned.conf
    Code:
    192.168.0.0/24
    /opt/etc/xinetd.d/saned
    Code:
    service saned
    {
            port = 6566
            socket_type = stream
            server = /opt/sbin/saned
            protocol = tcp
            user = root
            group = root
            wait = no
            disable = no
    }
    /opt/etc/xinetd.conf
    Code:
    # Copyright 1999-2004 Gentoo Foundation
    # Distributed under the terms of the GNU General Public License v2
    # Sample configuration file for xinetd
    
    defaults
    {
            only_from      = localhost 192.168.0.0/24
            instances      = 60
            log_type       = FILE /opt/var/xinetd.log
            log_on_success = HOST PID
            log_on_failure = HOST
            cps            = 25 30
    }
    
    includedir /opt/etc/xinetd.d
    Everything is configured properly, I got the dbus and cups installed since both are required for hplip to work properly.

    Here are some other files, that shows what happens:

    sane-find-scanner
    Code:
      # sane-find-scanner will now attempt to detect your scanner. If the
      # result is different from what you expected, first make sure your
      # scanner is powered up and properly connected to your computer.
    
      # No SCSI scanners found. If you expected something different, make sure that
      # you have loaded a kernel SCSI driver for your SCSI adapter.
      # Also you need support for SCSI Generic (sg) in your operating system.
      # If using Linux, try "modprobe sg".
    
    found USB scanner (vendor=0x03f0 [HP], product=0x5511 [Deskjet F300 series]) at libusb:001:006
      # Your USB scanner was (probably) detected. It may or may not be supported by
      # SANE. Try scanimage -L and read the backend's manpage.
    
      # Not checking for parallel port scanners.
    
      # Most Scanners connected to the parallel port or other proprietary ports
      # can't be detected by this program.
    scanimage -L
    Code:
    device `hpaio:/usb/Deskjet_F300_series?serial=CN6BSGK1M104KH' is a Hewlett-Packard Deskjet_F300_series all-in-one
    hp-probe
    Code:
    root@white:/opt/bin# ./hp-probe -busb
    warning: python-dbus not installed.
    warning: hp-probe should not be run as root/superuser.
    
    HP Linux Imaging and Printing System (ver. 0.0.0)
    Printer Discovery Utility ver. 4.1
    
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    
    
    --------------------
    | DEVICE DISCOVERY |
    --------------------
                                                                                                                                                                                                                                                 Device URI                                         Model
      -------------------------------------------------  ----------------------
      hp:/usb/Deskjet_F300_series?serial=CN6BSGK1M104KH  HP Deskjet F300 series
    
    Found 1 printer(s) on the 'usb' bus.
    
    
    Done.
    scanimage > test.jpg
    Code:
    scanimage: sane_start: Error during device I/O
    saned -d5
    Code:
    [saned] main: starting debug mode (level 5)
    [saned] read_config: searching for config file
    [saned] read_config: done reading config
    [saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up
    [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
    [saned] do_bindings: " sane-port " service unknown on your host; you should add
    [saned] do_bindings:      sane-port 6566/tcp saned # SANE network scanner daemon
    [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway.
    [saned] do_bindings: [0] socket () using IPv6
    [saned] do_bindings: [0] socket failed: Address family not supported by protocol
    [saned] do_bindings: [1] socket () using IPv4
    [saned] do_bindings: [1] setsockopt ()
    [saned] do_bindings: [1] bind () to port 6566
    [saned] do_bindings: [1] listen ()
    [saned] run_standalone: waiting for control connection
    [saned] handle_connection: processing client connection
    [saned] check_host: access by remote host: 192.168.0.10
    [saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
    [saned] check_host: local hostname: white
    [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f::
    [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f::
    [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f::
    [saned] check_host: local hostname(s) (from DNS): white
    [saned] check_host: local hostname(s) (from DNS): white
    [saned] check_host: local hostname(s) (from DNS): white
    [saned] check_host: remote host doesn't have same addr as local
    [saned] check_host: opening config file: /etc/hosts.equiv
    [saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
    [saned] check_host: opening config file: saned.conf
    [saned] check_host: config file line: `192.168.0.0/24'
    [saned] check_host: subnet with base IP = 192.168.0.0, CIDR netmask = 24
    [saned] check_host: access granted from IP address 192.168.0.10 (in subnet 192.168.0.0/24)
    [saned] init: access granted
    [saned] init: access granted to darthwissen@192.168.0.10
    [saned] process_request: waiting for request
    [saned] process_request: got request 1
    [saned] process_request: waiting for request
    [saned] process_request: got request 2
    [saned] process_request: access to resource `hpaio' granted
    [saned] process_request: sane_open returned: Success
    [saned] process_request: waiting for request
    [saned] process_request: got request 4
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    [saned] process_request: waiting for request
    [saned] process_request: got request 5
    to be continued... (saned -d5 is huge)
    Last edited by darthwissen; 05-05-2011 at 06:05. Reason: missing conf file

  6. #171

    SCX-4200 don't work

    hi!

    Samsung SCX-4200, RT-N16, 1.9.2.7-rtn-r2252 (and 1.9.2.7-rtn-r3000):

    Code:
    [root@RT-N16 root]$ sane-find-scanner
    
      # sane-find-scanner will now attempt to detect your scanner. If the
      # result is different from what you expected, first make sure your
      # scanner is powered up and properly connected to your computer.
    
      # No SCSI scanners found. If you expected something different, make sure that
      # you have loaded a kernel SCSI driver for your SCSI adapter.
      # Also you need support for SCSI Generic (sg) in your operating system.
      # If using Linux, try "modprobe sg".
    
    found USB scanner (vendor=0x04e8 [Samsung], product=0x341b [SCX-4200 Series]) at              libusb:002:002
      # Your USB scanner was (probably) detected. It may or may not be supported by
      # SANE. Try scanimage -L and read the backend's manpage.
    
      # Not checking for parallel port scanners.
    
      # Most Scanners connected to the parallel port or other proprietary ports
      # can't be detected by this program.
    [root@RT-N16 root]$ scanimage -L
    
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).
    [root@RT-N16 root]$
    [root@RT-N16 root]$ scanimage -T
    scanimage: no SANE devices found
    [root@RT-N16 root]$
    Code:
    [root@RT-N16 root]$ vi /opt/etc/sane.d/saned.conf
    # saned.conf
    # Configuration for the saned daemon
    
    192.168.1.0/24 #grant access to scanner from network 192.168.1.x
    
    ## Daemon options
    # Port range for the data connection. Choose a range inside [1024 - 65535].
    # Avoid specifying too large a range, for performance reasons.
    #
    # ONLY use this if your saned server is sitting behind a firewall. If your
    # firewall is a Linux machine, we strongly recommend using the
    # Netfilter nf_conntrack_sane connection tracking module instead.
    #
    # data_portrange = 10000 - 10100
    
    
    ## Access list
    # A list of host names, IP addresses or IP subnets (CIDR notation) that
    # are permitted to use local SANE devices. IPv6 addresses must be enclosed
    # in brackets, and should always be specified in their compressed form.
    #
    # The hostname matching is not case-sensitive.
    
    #scan-client.somedomain.firm
    #192.168.0.1
    #192.168.0.1/29
    #[2001:7a8:185e::42:12]
    #[2001:7a8:185e::42:12]/64
    
    # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
    # /etc/services must also be properly configured to start
    # the saned daemon as documented in saned(8), services(4)
    # and inetd.conf(4) (or xinetd.conf(5)).
    ~
    ~
    ~
    ~
    Code:
    [root@RT-N16 root]$ vi /opt/etc/xinetd.d/saned
    service saned
    {
            socket_type = stream
            server = /opt/sbin/saned
            protocol = tcp
            user = root
            group = root
            wait = no
            disable = no
    }
    ~
    ~
    Code:
    [root@RT-N16 root]$ grep "saned" /etc/services
    saned           6566/tcp        # SANE network scanner daemon
    [root@RT-N16 root]$ grep "saned" /opt/etc/init.d/S01sane-backends
    if !( grep -q ^saned.*6566 /etc/services ); then
    echo "saned 6566/tcp # SANE network scanner daemon" >> /etc/services
    help plz

  7. scanimage -L: No scanners were identified. Xerox WorkCentre 3119

    Hi All, thanks for the guide. I've got Xerox WorkCentre 3119 which is said to be supported. Made quite a few attempts trying to make it work - no luck so far. Tried almost everything including re-installation from scratch.

    Code:
    root]$ sane-find-scanner
    ...
    found USB scanner (vendor=0x0924 [Xerox], product=0x4265 [WorkCentre 3119 Series]) at libusb:001:002
    ....
    Code:
    root]$ scanimage -L
    No scanners were identified. 
    .....
    Code:
    root]$ cat /etc/services |grep sane
    saned                   6566/tcp        # SANE network scanner daemon
    ....
    Code:
    [root]$ killall xinetd
    [root]$ xinetd -d
    11/10/22@13:26:07: DEBUG: 416 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=15]
    Service defaults
            Instances = 60
            CPS = max conn:25 wait:30
            Bind = All addresses.
            Only from:  localhost(HOST) 192.168.1.0/255.255.255.0(NET)
            No access: No blocked sites
            Logging to syslog. Facility = authpriv, level = info
            Log_on_success flags = HOST PID
            Log_on_failure flags = HOST
    
    Service configuration: saned
            id = saned
            flags = IPv4
            socket_type = stream
            Protocol (name,number) = (tcp,6)
            port = 6566
            wait = no
            user = 0
            group = 0
            Groups = no
            PER_SOURCE = -1
            Bind = All addresses.
            Server = /opt/sbin/saned
            Server argv = saned
            Only from:  localhost(HOST) 192.168.1.0/255.255.255.0(NET)
            No access: No blocked sites
            Logging to syslog. Facility = authpriv, level = info
            Log_on_success flags = HOST PID
            Log_on_failure flags = HOST
    
    11/10/22@13:26:07: DEBUG: 416 {cnf_start_services} Started service: saned
    11/10/22@13:26:07: DEBUG: 416 {cnf_start_services} mask_max = 6, services_started = 1
    11/10/22@13:26:07: NOTICE: 416 {main} xinetd Version 2.3.14 started with no options compiled in.
    11/10/22@13:26:07: NOTICE: 416 {main} Started working: 1 available service
    11/10/22@13:26:07: DEBUG: 416 {main_loop} active_services = 1
    Code:
    root]$ cat /opt/etc/init.d/S01sane-backends
    #!/bin/sh
    
    PATH=/sbin:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/sbin
    
    if !( grep -q ^saned.*6566 /etc/services ); then
            echo "saned             6566/tcp        # SANE network scanner daemon" >> /etc/services
    fi
    Code:
    root]$ saned -d128
    [saned] main: starting debug mode (level 128)
    [saned] read_config: searching for config file
    [saned] read_config: done reading config
    [saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up
    [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
    [saned] do_bindings: " sane-port " service unknown on your host; you should add
    [saned] do_bindings:      sane-port 6566/tcp saned # SANE network scanner daemon
    [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway.
    [saned] do_bindings: [0] socket () using IPv6
    [saned] do_bindings: [0] setsockopt ()
    [saned] do_bindings: [0] bind () to port 6566
    [saned] do_bindings: [0] listen ()
    [saned] do_bindings: [1] socket () using IPv4
    [saned] do_bindings: [1] setsockopt ()
    [saned] do_bindings: [1] bind () to port 6566
    [saned] do_bindings: [1] bind failed: Address already in use
    [saned] run_standalone: waiting for control connection
    Is there any hope guys?
    Thanks

  8. #173
    lindalion, dccharacter, I have same problem with Samsung SCX-3185.

    It's because sane 1.0.22 have an issue in xerox_mfp module. I have applied patch from (it can be downloaded from http://anonscm.debian.org/gitweb/?p=...3fa63e0a25b3f7), recompiled xerox_mfp using toolchain (file attached) and placed it into /opt/lib/sane.

    After that my scanner is detected by xerox_mfp module, but now i have timeout error in sanei_usb.

    Most interesting log fragment:
    Code:
    [sanei_usb] sanei_usb_open: opened usb device `libusb:003:003' (*dn=0)
    [xerox_mfp] :: dev_command(INQUIRY[0x12], 70)
    [sanei_usb] sanei_usb_write_bulk: trying to write 4 bytes
    [sanei_usb] 000 1B A8 12 00                                     ....            
    [sanei_usb] sanei_usb_write_bulk: wanted 4 bytes, wrote 4 bytes
    [sanei_usb] sanei_usb_read_bulk: trying to read 1024 bytes
    USB error: error reading from bulk endpoint 0x84: Connection timed out
    [sanei_usb] sanei_usb_read_bulk: read failed: Connection timed out
    [xerox_mfp] usb_dev_request: sanei_usb_read_bulk: Error during device I/O
    [xerox_mfp] dev_command: dev_request: Error during device I/O
    [xerox_mfp] usb_dev_close: closing dev 0x41dda0
    [sanei_usb] sanei_usb_close: closing device 0
    [xerox_mfp] list_one_device: dev_inquiry(libusb:003:003): Error during device I/O
    strace log:
    Code:
    open("/proc/bus/usb/003/003", O_RDWR)   = 4
    ioctl(4, USBDEVFS_SETCONFIGURATION, 0x7fff49d4) = 0
    ioctl(4, USBDEVFS_CLAIMINTERFACE, 0x7fff49d4) = 0
    ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a24) = 0
    ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a24) = 0
    gettimeofday({1326197756, 621351}, NULL) = 0
    ioctl(4, USBDEVFS_SUBMITURB, 0x7fff481c) = 0
    ioctl(4, USBDEVFS_REAPURBNDELAY, 0x7fff4800) = 0
    ioctl(4, USBDEVFS_BULK, 0x7fff4900)     = 70
    ioctl(4, USBDEVFS_BULK, 0x7fff4900)     = -1 ETIMEDOUT (Connection timed out)
    ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff493c) = 0
    ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a44) = 0
    ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a44) = 0
    ioctl(4, USBDEVFS_RELEASEINTERFACE, 0x7fff4a2c) = 0
    close(4)                                = 0
    Same error in rtn-r3702 (2.6 kernel) and d-r2624 (2.4 kernel).

    I belive the problem can be in sanei_usb or libusb, but I can't recompile it yet.
    Attached Files Attached Files

  9. #174
    Finally, I get it worked!!!

    Second problem was in libusb. Simple recompiling has solved issue.

    How to install:

    1. Download xerox_mfp_wl500.tar.bz2 from attach and place it into /tmp dir on your wl.
    2. Unpack it and install:
    Code:
    cd /tmp
    tar jxf xerox_mfp_wl500.tar.bz2
    ./install
    Now you can do scanimage -L and so on.
    Attached Files Attached Files

  10. #175

    Smile

    Thanks!!! It Worked!
    Last edited by lindalion; 12-01-2012 at 15:50. Reason: !))

  11. #176
    I am so hoping someone can help me here because I sure as heck won't get any help on any of the DD-WRT forums. I have and HP PSC 1610 printer/scanner combo. I have followed all the directions here and even gone with the older version of dbus but to no avail. I am still getting this error. Any help would be appreciated.


    root@DD-WRT:~# scanimage -T
    process 15247: arguments to dbus_connection_send() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3046.
    This is normally a bug in some application using the D-Bus library.
    D-Bus not compiled with backtrace support so unable to print a backtrace
    Aborted


    Hoping you can help!

    Joe

  12. #177
    *removed*
    followed this instead for tomato: http://shcherbyna.com/?p=960
    Last edited by bseos; 30-07-2012 at 17:17.

  13. #178
    Hi there, i have installed sane-backend as per instructions, but it turns out my printer/scanner (canon mp280) is not supported in sane-backends 1.0.22. But the 1.0.23git (http://www.sane-project.org/lists/sane- ... ml#S-PIXMA) does support it.

    Is there any way to get the un-released sane-backends (1.0.23git) created into an ipkg?

    "bind failed (Address already in use (errno = 98)). service = saned"
    Last edited by Bogie67; 03-08-2012 at 22:41.

  14. #179
    hm ipkg is death... you can upgrade to our, etnware called new repository and cross-compile the software yourself

    http://code.google.com/p/wl500g-repo/wiki/Compiling
    RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
    pyload 0.4.9
    minidlna 1.1.2
    samba 3.6.5
    openvpn 2.3.10
    ̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired

  15. #180
    I am only a newbie to understand that complex thing. The Sane-backends 1.0.23 comes out and need someone help to update the repositories
    Last edited by Bogie67; 20-09-2012 at 06:22.

Page 12 of 13 FirstFirst ... 210111213 LastLast

Similar Threads

  1. Replies: 24
    Last Post: 05-05-2015, 08:42
  2. SANE (Scanner server) - Any chance for WL-500g?
    By Dante_ in forum WL-500g Custom Development
    Replies: 107
    Last Post: 31-08-2012, 11:41
  3. [HowTo] Sane Scanner-Server mit XSane Frontend
    By carterb in forum German Discussion - Deutsch (DE)
    Replies: 9
    Last Post: 30-08-2012, 20:01
  4. HowTo install OpenVPN server
    By Tamadite in forum WL-500g/WL-500gx Tutorials
    Replies: 41
    Last Post: 31-05-2012, 21:41
  5. HowTo secure FTP server (SSL/TLS)
    By Tamadite in forum WL-500gP Tutorials
    Replies: 12
    Last Post: 14-10-2008, 20:38

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •