yes I install from tutorial with ipkg install sane-backends
output:
Code:service saned { socket_type = stream server = /opt/sbin/saned protocol = tcp user = admin group = root wait = no disable = no }
yes I install from tutorial with ipkg install sane-backends
output:
Code:service saned { socket_type = stream server = /opt/sbin/saned protocol = tcp user = admin group = root wait = no disable = no }
Hi,
did you restart the router after installation?
Please post the output of the following command:
And post the file:Code:tail /etc/services | grep saned
Try it after a restart:Code:vi /opt/etc/init.d/S01sane-backends
RegardsCode:flashfs save && flashfs commit && flashfs enable && reboot
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
yes I resert router afret install
I usebut not changedCode:tail /etc/services | grep saned
output :
Code:#!/bin/sh PATH=/sbin:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/sbin if !( grep -q ^saned.*6566 /etc/services ); then echo "saned 6566/tcp # SANE network scanner daemon" > fi
What Firmware are you using?
Please attach the following file:
RegardsCode:etc/services
Oliver
Last edited by carterb; 08-02-2010 at 14:40.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
I use WL500gpv2-1.9.2.7-d-r1087
Hi,
please post the file:
You can better attach it as a textfile.Code:vi /etc/services
Regards
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver