Start->Run->Cmd
Type ipconfig /all
Open web-admin: Ip-Config->DHCP server
Type MAC address (without :'s) from ipconfig into maually assign ip list and enter 192.168.1.2 as Ip-address.
Now you will allways get that IP address.
S.
Every now and then my Local IP changes from 192.168.1.2 to 192.168.1.3 or 4 etc. Then I need to change the ip adresses in my router at option Virtual Server because otherwise I get LOW ID within Emule. To set more IP adresses in Virtual server does not work...only the Local IP adress at that moment !!
Start->Run->Cmd
Type ipconfig /all
Open web-admin: Ip-Config->DHCP server
Type MAC address (without :'s) from ipconfig into maually assign ip list and enter 192.168.1.2 as Ip-address.
Now you will allways get that IP address.
S.
Have a question?
I have write two Mac Adresses in the WL500g. The Ip Adress is change than at my PC. When i put only my Adress in the WL500g DHCP Server it runs with one IP Adress.
Is that normal??