wondershaper howto?

[rexster]

http://chupa.nl/phpwiki/index.php/PackageWondershaper
somebody please update this wondershaper instruction.
please...

i cant make it work because i think it's for the old firmware.
now, the /init is not valid anymore.

and, when i try this:
wshaper start "$1" 256 48

my adsl bandwidth is 384/64
and i read people put lower value for wshaper command.
(yes, we got very slow adsl in our country. and very expensive too.)

but, i got this in return:

Cannot find device "root"
Error: Qdisc "1:" is classless.
Error: Qdisc "1:1" is classless.
Error: Qdisc "1:1" is classless.
Error: Qdisc "1:1" is classless.
Unknown qdisc "1:10", hence option "handle" is unparsable
Unknown qdisc "1:20", hence option "handle" is unparsable
Unknown qdisc "1:30", hence option "handle" is unparsable
Unknown filter "1:0", hence option "protocol" is unparsable
Unknown filter "1:0", hence option "protocol" is unparsable
Unknown filter "1:", hence option "protocol" is unparsable
Unknown filter "1:", hence option "protocol" is unparsable
Unknown qdisc "ffff:", hence option "ingress" is unparsable
Unknown filter "ffff:", hence option "protocol" is unparsable


i dont understand a single thing in this error.

also, anyone knows about wmm (wireless multimedia?)
should i enable this? and another options?
what this for? does it have anything to do with bw management?

please help...

t.i.a.

[hugo]

Selamat datang,

You must use the instruction here
to add the line

wshaper start "$1" 256 48

to your post-firewall script. $1 will not be reconised otherwise.

From command line, you must use ppp0 instead of "$1"

[rexster]

wow!?!?
where you learn that?
are you indonesian?

i'll try that one tommorrow.
tnx.

[hugo]

no, but I've been travelling in more than 40 countries around the world, including malaysia and indonesia. But it's just a few everyday words I know

[rexster]

so i'd put it in post-firewall, and i try this:

wshaper stat

it return this:

Cannot find device "root"
Error: Qdisc "1:" is classless.
Error: Qdisc "1:1" is classless.
/sbin/wshaper: 69: Syntax error: 9*/10



fyi. my asus wl500g connected to my adsl router using ethernet.
(if that make any different...)



btw. 40 country? that's a lot!

[hugo]

use wshaper status eth1 or ppp0