Getting a new power supply

[PPmarcel]

Hello,

I'm used to live in Europe, and i'm actually in USA for my work. Does anyone knows that if i buy ASUS WL-500g in USA, the power supply is able to zork zith 220v in Europe then?

[newbiefan]

There is a sign on the power supply: INPUT 100-240V 50/60Hz, therefore just the plug is different. But I bet you'll get a european/US converter-plug @ radio shack or (larger) similar store for a couple $.
Or you can get it here in Europe, several times I bought some in Europe and US.

[al37919]

Well, I don't live in States now, however, my experience is that 90% of the electronic stuff sold there is usually 110V only. So, check carefully before you buy.

[PPmarcel]

al37919, you confirm my fears. So i ask to american users of this router, if their power supply is only at 110v or 110/220v (i already have a converter).

[citro]

My power source is defective. I found another power source (5Volts 3Amps) but what kind of connector do I need? The alternative power source has a 2.1/5.5mm power connector, and I don't know if it fits.

I know I can buy another connector and replace the default one, but I'm not good at soldering things.

[jr0]

My power source is defective. I found another power source (5Volts 3Amps) but what kind of connector do I need? The alternative power source has a 2.1/5.5mm power connector, and I don't know if it fits.

I know I can buy another connector and replace the default one, but I'm not good at soldering things.

Just cut off the connector from the old power supply and adjust it on the new one while preserving the color code. But if you want to be 100% sure for the polarization use a multimeter to determine the positive and negative wires.
It's not absolutely necessary to use soldering iron , you can just twist the wires and isolate them with heat shrinking tubes.
Another way is to change the entire cable from inside the PSU with the cable from the old PSU. But here you'll need some soldering skills (it's not that hard ).
Hope it helps.

[tungtung]

Citro, if this helps somewhat ... the plug size is exactly the same as the one that Lacie use for their external drive (unfortunately theirs use 12V so can't use that). The adapter for the WL500GP is center positive by the way.

Oh and do you mind sharing the info where you get your replacement adapter? Mine is also toast, and I still am having trouble finding the replacement.

[citro]

@tungtung: I am sorry for the (VERY) delayed answer.

This is the product link:
http://conexelectronic.ro/produs.php?id=122402

The price is 15EURO.

Hope this helps.

[myschoo]

maybe you just need to get a new capacitor.. there is a thread somewhere about this

[chiisai]

There seems to be an influx of users with broken power supplies these days. I'm one of them. The only replacement power supply I found locally set me back ~$55 and didn't include a plug with the correct size. I'll probably have to do some soldering to make it work, but I still haven't given up trying to get a replacement from Asus. Here's the important parts of my communication with them:

(wall of text detailing my troubleshooting and why I believe the power supply is dead) Is it possible to get my hands on a new power supply? Thanks!

Best Dear Valued ASUS Customer!

Unfortunately, we have to spare Power supplies to send. Your router is most likely defective, please contact your reseller.

Best Regards / Med Vänliga Hälsningar,

ASUS TMSS Support

At this point I attempted to contact the online store where I bought the router. However, they have merged with a different online store and no longer sell Asus products. They could not help.

(...)
My reseller could not help, because they no longer sell the product.

I have successfully confirmed that the router runs fine with a different
power adapter (5V, max 4A), although the socket is too small to fit
correctly in the router, so it cannot run without me holding it in or huge
amounts of duct tape (which still wouldn't be too reliable).

Are you sure you can't order a spare power supply somehow?

(...) The reseller is obliged to help you.

Unfortunately we have not spare parts to send out. (...)

The router was ordered from Stretto.no, which has been bought by a company
named Nicator (www.nicator.no). My original reseller no longer exists, and
Nicator does not sell Asus products at all. In short: I do not have a
reseller. What am I supposed to do?

(...) Unfortunately, your router was sold by Asus to Ingram micro in Germany, which is why the warranty is not valid in any other country than Germany. (...)

That sounds like a bullshit excuse to me. Has anyone been able to get a new power supply from Asus?

[gouryella]

Try to buy source from some shop with electronic components.
I have this one http://www.gme.cz/cz/index.php?product=751-444 5V/4,5A output connector 5/2.1mm 12$
connector looks same, but i must use some force to plug in to router :-(



or something like:
http://www.ges.cz/?page=index&or=sor...gcat=XK5N&of=3

sorry this shops is only in my coutry and do not ship outside!!!

my original power source isn't dead, i buy new one because my external 2.5 USB hardrive not work correctly with 2.5A with wifi on.

[raas]

Or you could harvest a power supply from an old computer. and spend the money on a multimeter, if you don't already have it.
http://www.wikihow.com/Convert-a-Com...b-Power-Supply
(actually, I didn't use this guide, I only connected the green wire on the ATX connection to a black wire (gnd). You have to have some kind of load connected to the psu so start with an old hard drive and see if it spins up. The first I tried didn't accept it that way, the second one did.)



This provides more than enough current for the asus, plus you have an option of other voltages to power other devices. And also. they are much more power-efficient than those single ac/dc adapters


I did this last week, 'converted' an old pc-power supply, now running the asus on it without a problem.

I also converted some other devices which were within reach of this old pc-psu.

- computer switch, runs of 12v
- corldess phone base unit, runs of 5v
- ventilation system for my hobby room, runs of 12v.
- I already mentioned the asus.

So now I have a nice collection of 4 ad/dc adapters, replaced by one effecient power supply.
(if you don't use the adapters, cut of the connectors to connect to and from the psu and the unit you want to power.)

things I'll have to convert, but I hadn't had the time yet.

- small speaker system for 2nd computer in hobby-room, runs of 12v
- docking-station for laptop, run of 12v

the power supply is running now for almost a week, and it is cool and quiet (temperature controlled fan inside)....and efficient. (i measure, i know)

...every house should have efficient 12v/5v lines next to 220v, instead of dozens of ac/dc adapters for all kinds of equipment....


Hth

[kauczu]

Or you could harvest a power supply from an old computer. and spend the money on a multimeter, if you don't already have it.
http://www.wikihow.com/Convert-a-Com...b-Power-Supply
(actually, I didn't use this guide, I only connected the green wire on the ATX connection to a black wire (gnd). You have to have some kind of load connected to the psu so start with an old hard drive and see if it spins up. The first I tried didn't accept it that way, the second one did.)

This provides more than enough current for the asus, plus you have an option of other voltages to power other devices. And also. they are much more power-efficient than those single ac/dc adapters


I did this last week, 'converted' an old pc-power supply, now running the asus on it without a problem.

I also converted some other devices which were within reach of this old pc-psu.

- computer switch, runs of 12v
- corldess phone base unit, runs of 5v
- ventilation system for my hobby room, runs of 12v.
- I already mentioned the asus.

So now I have a nice collection of 4 ad/dc adapters, replaced by one effecient power supply.
(if you don't use the adapters, cut of the connectors to connect to and from the psu and the unit you want to power.)

things I'll have to convert, but I hadn't had the time yet.

- small speaker system for 2nd computer in hobby-room, runs of 12v
- docking-station for laptop, run of 12v

the power supply is running now for almost a week, and it is cool and quiet (temperature controlled fan inside)....and efficient. (i measure, i know)

...every house should have efficient 12v/5v lines next to 220v, instead of dozens of ac/dc adapters for all kinds of equipment....


Hth

Hi

A lot of power supplys damaged around my Asus box (1 router psu, 2 pcs. of cheap-chinese-hdd-psu s).
Lastly i decided to use old atx psu to maintain hdd power, but did not realized that atx psu can be used as power suply for router, hdd, and manu more simulatously.
I have only a question: on my atx psu written that +5V line is 15 Amps. Is this is not too high value for WL-500gP router? Can it handle it? I don't want to damage my box.

Greets!

[gouryella]

Hi

A lot of power supplys damaged around my Asus box (1 router psu, 2 pcs. of cheap-chinese-hdd-psu s).
Lastly i decided to use old atx psu to maintain hdd power, but did not realized that atx psu can be used as power suply for router, hdd, and manu more simulatously.
I have only a question: on my atx psu written that +5V line is 15 Amps. Is this is not too high value for WL-500gP router? Can it handle it? I don't want to damage my box.

Greets!

ATX power supply, green and black (ground) pin must be connected through for power on.
Amps not problem, but some sources (older atx) may require some load.


Using ATX power without switching on:
take a look on atx label - stand by power +5VSB if have 2.5A (2A without USB hard drive)

connect router on purple and black cable, ... wow it runs without fan...(using only stand-by power for wol features etc.)

[j4nn]

Try to buy source from some shop with electronic components.
I have this one http://www.gme.cz/cz/index.php?product=751-444 5V/4,5A output connector 5/2.1mm 12$
connector looks same, but i must use some force to plug in to router :-(
....

I bought above mentioned power supply from gme in Brno but it does not work at all with my asus wl500gp, not even when nothing is connected to the router (no usb stuff) - it just lights all leds and keeps them on infinitely, does not continue with boot.

It seems to me that this power supply is a Chinese crap - when I tried to short cut the power supply with 10 ohms resitor, I measured only 3.5V voltage on it, that means it delivered only 3.5V with 350mA!

I can't imagine how this power supply can work with your router?
Or is just the piece I bought yesterday defective?
If nothing is connected to the power supply, I can measure 5.2V voltage, so it's strange - how can they declare it to provide 5V/4.5A when it delivers only 3.5V with 350mA?

I am going to return it today, but I do not see a better alternative in the GM shop unfortunately.

I wanted to replace the original power supply with more powerful one in order to be able to run 2.5" hardisk with the router, but it seems I have a bad luck:-(