Samba still only readable ... Help

**deskmate** · 04-04-2005, 04:57

Hi,

I am a newbie for this and I have spend 2 days searching through this forum, great info (got my firmware upgarded, got to know what is samba etc.) , thanks!

However, I still can't get samba working. I am only using the Samba Demo provided in the 1.9.2.7-4. I can see and read from the drive but I can't write to the drive, I just want a simple lan disk, no fancy stuff whatsoever, please help.........

Please ...............

Below is the details:

Firmware: 1.9.2.7-4
USB HD formated as FAT32
Windows XP SP2
LAN id for the drive "NetDisk"

Log
------------------------------
(some initial lines deleted, over the posting limit of 10000 characters)

Jan 1 08:00:03 kernel: device eth0 entered promiscuous mode
Jan 1 08:00:03 kernel: device eth2 entered promiscuous mode
Jan 1 08:00:03 kernel: br0: port 2(eth2) entering listening state
Jan 1 08:00:03 kernel: br0: port 1(eth0) entering listening state
Jan 1 08:00:03 kernel: br0: port 2(eth2) entering learning state
Jan 1 08:00:03 kernel: br0: port 1(eth0) entering learning state
Jan 1 08:00:03 kernel: br0: port 2(eth2) entering forwarding state
Jan 1 08:00:03 kernel: g
Jan 1 08:00:03 kernel: br0: port 1(eth0) entering forwarding state
Jan 1 08:00:03 kernel: br0: topology change detected, propagating
Jan 1 08:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 08:00:04 kernel: usb.c: registered new driver hub
Jan 1 08:00:04 kernel: usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
Jan 1 08:00:04 kernel: usb-ohci.c: usb-00:04.0, PCI device 14e4:4715
Jan 1 08:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 08:00:04 kernel: hub.c: USB hub found
Jan 1 08:00:04 kernel: hub.c: 2 ports detected
Jan 1 08:00:05 kernel: hub.c: new USB device 00:04.0-1, assigned address 2
Jan 1 08:00:05 kernel: hub.c: USB hub found
Jan 1 08:00:05 kernel: hub.c: 4 ports detected
Jan 1 08:00:05 kernel: lp0: using parport0 (polling).
Jan 1 08:00:05 kernel: usb.c: registered new driver usblp
Jan 1 08:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 08:00:05 dnsmasq[51]: DHCPDISCOVER(br0) 192.168.1.89 00:0f:3d:cf:18:32
Jan 1 08:00:05 dnsmasq[51]: DHCPOFFER(br0) 192.168.1.89 00:0f:3d:cf:18:32
Jan 1 08:00:05 kernel: hub.c: new USB device 00:04.0-1.3, assigned address 3
Jan 1 08:00:05 kernel: usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active driver.
Jan 1 08:00:06 kernel: hub.c: new USB device 00:04.0-1.4, assigned address 4
Jan 1 08:00:06 kernel: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3409
Jan 1 08:00:06 kernel: printer.c: usblp0 Device ID string [75]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:07 kernel: usb.c: registered new driver audio
Jan 1 08:00:07 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 08:00:07 kernel: Linux video capture interface: v1.00
Jan 1 08:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 08:00:09 kernel: Initializing USB Mass Storage driver...
Jan 1 08:00:09 kernel: usb.c: registered new driver usb-storage
Jan 1 08:00:09 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 08:00:09 kernel: Vendor: WDC WD80 Model: 0BB-00JHA0 Rev: 0811
Jan 1 08:00:09 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 08:00:09 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 08:00:09 kernel: SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Jan 1 08:00:09 kernel: Partition check:
Jan 1 08:00:09 kernel: p5 >
Jan 1 08:00:09 kernel: USB Mass Storage support registered.
Jan 1 08:00:10 pppd[86]: Plugin rp-pppoe.so loaded.
Jan 1 08:00:10 pppd[86]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 08:00:11 pppd[87]: pppd 2.4.2 started by admin, uid 0
Jan 1 08:00:11 kernel: lp driver: get device ID
Jan 1 08:00:11 kernel: neg fail
Jan 1 08:00:13 kernel: printer.c: usblp0 Device ID string [75/max 1552]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:13 kernel: printer.c: Parsing USBLPID...
Jan 1 08:00:13 dnsmasq[51]: DHCPDISCOVER(br0) 192.168.1.89 00:0f:3d:cf:18:32
Jan 1 08:00:13 dnsmasq[51]: DHCPOFFER(br0) 192.168.1.89 00:0f:3d:cf:18:32
Jan 1 08:00:13 dnsmasq[51]: DHCPREQUEST(br0) 192.168.1.89 00:0f:3d:cf:18:32
Jan 1 08:00:13 dnsmasq[51]: DHCPACK(br0) 192.168.1.89 00:0f:3d:cf:18:32 ENGINEERING_II
Jan 1 08:00:14 kernel: printer.c: usblp0 Device ID string [75/max 1552]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:14 kernel: printer.c: Parsing USBLPID...
Jan 1 08:00:16 kernel: lp driver: get device ID
Jan 1 08:00:16 kernel: neg fail
Jan 1 08:00:17 kernel: neg fail
Jan 1 08:00:20 kernel: printer.c: usblp0 Device ID string [75/max 1552]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:20 kernel: printer.c: Parsing USBLPID...
Jan 1 08:00:21 kernel: attempt to access beyond end of device
Jan 1 08:00:21 kernel: 08:01: rw=0, want=2, limit=1
Jan 1 08:00:21 kernel: EXT3-fs: unable to read superblock
Jan 1 08:00:21 kernel: MSDOS FS: Using codepage 950
Jan 1 08:00:21 kernel: MSDOS FS: IO charset cp950
Jan 1 08:00:21 kernel: FAT: bogus logical sector size 0
Jan 1 08:00:21 kernel: VFS: Can't find a valid FAT filesystem on dev 08:01.
Jan 1 08:00:21 kernel: FAT: freeing iocharset=cp950
Jan 1 08:00:21 kernel: FAT: bogus logical sector size 0
Jan 1 08:00:21 kernel: VFS: Can't find a valid FAT filesystem on dev 08:01.
Jan 1 08:00:21 kernel: VFS: Can't find ext3 filesystem on dev sd(8,5).
Jan 1 08:00:21 kernel: MSDOS FS: Using codepage 950
Jan 1 08:00:21 kernel: MSDOS FS: IO charset cp950
Jan 1 08:00:22 USB storage: vfat fs mounted to /tmp/harddisk
Jan 1 08:00:24 FTP server: daemon is started
Jan 1 08:00:26 pppd[87]: PPP session is 9981
Jan 1 08:00:26 pppd[87]: Using interface ppp0
Jan 1 08:00:26 pppd[87]: Connect: ppp0 <--> eth1
Jan 1 08:00:26 pppd[87]: Remote message: Welcome to use Quidway ROUTER, Huawei Tech.^M^J
Jan 1 08:00:26 pppd[87]: PAP authentication succeeded
Jan 1 08:00:26 pppd[87]: peer from calling number 00:E0:FC:21:43:E8 authorized
Jan 1 08:00:26 pppd[87]: local IP address 221.217.227.134
Jan 1 08:00:26 pppd[87]: remote IP address 221.217.226.1
Jan 1 08:00:26 pppd[87]: primary DNS address 202.106.0.20
Jan 1 08:00:26 pppd[87]: secondary DNS address 202.106.46.151
Jan 1 08:00:27 dnsmasq[51]: read /etc/hosts - 5 addresses
Jan 1 08:00:27 dnsmasq[51]: reading /tmp/resolv.conf
Jan 1 08:00:27 dnsmasq[51]: using nameserver 202.106.46.151#53
Jan 1 08:00:27 dnsmasq[51]: using nameserver 202.106.0.20#53
Jan 1 08:00:29 PPPoE: connect to ISP
Jan 1 08:00:35 kernel: printer.c: usblp0 Device ID string [75/max 1552]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:35 kernel: printer.c: Parsing USBLPID...
Jan 1 08:00:56 kernel: printer.c: usblp0 Device ID string [75/max 1552]='MFG:Samsung;CMD:GDI;MDL:SCX-4x16 Series;CLS:PRINTER;MODE:PCL;STATUS:IDLE;'
Jan 1 08:00:56 kernel: printer.c: Parsing USBLPID...

------------------------------

samba file (default one come with the 1.9.2.7-4)
------------------------------
[admin@NetDisk root]$ cat /etc/smb.conf
[global]
workgroup = Magnafon
guest account = nobody
security = share
browseable = yes
guest ok = yes
guest only = yes
log level = 1
max log size = 100
encrypt passwords = no
preserve case = yes
short preserve case = yes

[share]
path = /tmp/harddisk

[share$]
path = /tmp/harddisk
writable = yes
force user = admin
browseable = no

**deskmate** · 04-04-2005, 05:25

2005/04/04 11:50:27 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 134)
Unknown message type 160!
2005/04/04 11:50:28 unknown command type (SMBunknown): cnum=105 type=160 (0xA0)
Unknown message type 160!
2005/04/04 11:50:28 unknown command type (SMBunknown): cnum=105 type=160 (0xA0)
2005/04/04 11:50:37 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:50 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:53 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:53 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:53 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:53 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:53 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:53 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:54 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:54 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:54 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:55 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
Unknown message type 160!
2005/04/04 12:10:56 unknown command type (SMBunknown): cnum=105 type=160 (0xA0)
Unknown message type 160!
2005/04/04 12:10:56 unknown command type (SMBunknown): cnum=105 type=160 (0xA0)
Unknown message type 160!
2005/04/04 12:10:56 unknown command type (SMBunknown): cnum=105 type=160 (0xA0)
2005/04/04 12:10:56 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:56 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:56 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:57 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:57 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:57 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:58 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:58 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:58 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:58 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:10:58 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:10:58 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:11:00 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:00 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 137)
2005/04/04 12:11:00 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:01 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:01 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:01 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:01 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:01 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:02 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:02 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:02 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:02 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:02 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:02 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:02 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:02 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 138)
2005/04/04 12:11:11 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:12 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 139)
2005/04/04 12:11:12 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:12 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 139)
2005/04/04 12:11:14 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:14 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 139)
2005/04/04 12:11:15 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:15 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 139)
2005/04/04 12:11:22 office_i (192.168.1.87) closed connection to service share
2005/04/04 12:11:23 office_i (192.168.1.87) connect to service share as user nobody (uid=99,gid=99) (pid 140)
2005/04/04 12:11:33 office_i (192.168.1.87) closed connection to service share
bind failed on port 139 socket_addr=0.0.0.0 (Address already in use)

**deskmate** · 04-04-2005, 05:26

$ cat /var/log/nmb
2005/04/04 12:22:39 netbios nameserver version 1.9.18p10 started
Copyright Andrew Tridgell 1994-1997
find_response_record: response packet id 62 received with no matching record.
find_subnet_for_nmb_packet: response record not found for response id 62
find_response_record: response packet id 62 received with no matching record.
find_subnet_for_nmb_packet: response record not found for response id 62
find_response_record: response packet id 62 received with no matching record.
find_subnet_for_nmb_packet: response record not found for response id 62
find_response_record: response packet id 62 received with no matching record.
find_subnet_for_nmb_packet: response record not found for response id 62

**deskmate** · 04-04-2005, 05:28

$ cat /tmp.syslog.log
cat: /tmp.syslog.log: No such file or directory

**deskmate** · 05-04-2005, 04:06

pretty please ...

**barsju** · 05-04-2005, 07:51

Did you try the share$ (\\your router\share$)?

S.

PS: It should be /tmp/syslog.log

**deskmate** · 05-04-2005, 09:57

Thanks barsju!

It was the damn "$" sign!!!! with that added, everything is fine, what a bummer!

**Oleg** · 05-04-2005, 10:07

Originally Posted by deskmate

Thanks barsju!

It was the damn "$" sign!!!! with that added, everything is fine, what a bummer!

RTFM better.

Thread: Samba still only readable ... Help

Thread Tools

Rate This Thread

Display

Samba is still read only ... Help

cat /var/log/smb results

$ cat /var/log/nmb results

$ cat /tmp.syslog.log results

Help me please

it worked!!

Posting Permissions