1TB Sata HDD not being initialized

[MMCM]

I am using such an Adapter on an older Compaq, and I had to set a BIOS delay of 15 seconds, but that still does not work 100% of the time, especially when doing a reboot.

[ganx]

Yop, I temporary fixed this through connecting a cable from my pc on the hdd, so it was up before the router. When the HDD finished spinning up, I turned it on and flashed it.

Then, I was able to turn it off with the power button, change the power source to the router's own power cable and let it boot from HDD again.

The only damn thing is, that when I plug the router's power cable off the power source, I have to repeat that cablechange-procedure, else it doesn't detect the HDD again and ends up hanging with no led flashing but wan or 1,2,3,4 (if connected).

I'm gonna test if it boots tomorrow morning, when it was turned off all night, but connected to the power source all the time.

I can't really explain that, but I can work with it for now.. ^^

I'll probably test it with another sata tb-hdd some other time.

[ganx]

Oh man.. Just came back, had the router turned off for a few hours.

Turned it on, IDE light constantly flashing, it didn't boot again.

I just hope it's not the adaptor, I can't afford 20 adaptors until I get one that's working. Testing with another HDD tomorrow.

I'll keep this updated, just in case anyone's interested. ^^

[ganx]

Yay, I finally solved this issue.

Bought a new Sata-HDD yesterday (Samsung EcoGreen F2, 1TB) and installed it into the router.

Everything fine, disk spins up early enough to be recognised by the router.

At the time, it already took it's place besides my Thomson Modem again, being filled up with my before backup'ed photos, videos and music.

Ah just for Info, this is what I used, 100% working together and fitting nice into the router (cutted some of the aluminium shell below the hdd off to fit in ):

http://geizhals.at/a433717.html --> Sata to IDE converter, about 20€ at a shop near my home

http://geizhals.at/a401979.html--> Samsung EcoGreen F2 1TB (it's so quiet, I had to look after the router the first few times)

Thanks wl500g forum!

[Noeyedeer]

Glad you got it working. Thanks for the details of the working parts.

Do you know if the disc still spins down after a period of inactivity?

Thanks,
Marty.

[ganx]

Hi, yep - it still does. Could disable it, but I think it's better for my power bill ^^