Ôàáðèêà-ôëóäèëüíÿ

**Parkinstein** · 24-07-2010, 09:09

Òèõî äîõíóò.... îáïèâøèñü õîëîäíîãî ïèâà... òåïåðü 38 è ãîðëî áîëèò...

**LnrMn** · 24-07-2010, 09:25

Originally Posted by Parkinstein

Òèõî äîõíóò.... îáïèâøèñü õîëîäíîãî ïèâà... òåïåðü 38 è ãîðëî áîëèò...

38 íà óëèöå èëè â òåëå ?

**Parkinstein** · 24-07-2010, 09:55

Originally Posted by LnrMn

38 íà óëèöå èëè â òåëå ?

è òàì è òàì... ê ñîæàëåíèþ...

à ãàðìîíèè íåòó...

ÄÎÎÎÎÎÎÆÄÜ!!!!!!!!!!!

**hds82** · 26-07-2010, 08:25

Обратился в техподдержку АСУС, прислали ответ:
Здравствуйте
Спасибо за обращение в службу технической поддержки ASUS.

1 Скачайте c сайта ASUS и разархивируйте прошивку для WL-500gPV2
2 Установите утилиты с диска , идущего в комплекте (понадобится утилита Firmware Restoration)
3 Настройте сетевые параметры компьютера (в свойствах TCP/IP) с IP адресом 192.168.1.2 маска 255.255.255.0
4 Подключите компьютер к любому из LAN портов маршрутизатора.
5 Выключите питание на маршрутизаторе, нажмите кнопку Restore и удерживая её включите питание, кнопку удерживайте в течении 10-15сек , пока индикатор питания не начнёт постоянно мигать.
6 Запустите утилиту Firmware Restoration , укажите путь до прошивки и загрузите её в маршрутизаторе.
7 На экране должны отображаться процесс загрузки прошивки в маршрутизаторе.
8 После загрузки прошивки и перезагрузки маршрутизатора попробуйте ввойти в меню через браузер http://192.168.1.1

В итоге помогло и я реанимировал свой маршрутизатор

**Parkinstein** · 26-07-2010, 08:42

Originally Posted by hds82

Îáðàòèëñÿ â òåõïîääåðæêó ÀÑÓÑ, ïðèñëàëè îòâåò:
Çäðàâñòâóéòå
Ñïàñèáî çà îáðàùåíèå â ñëóæáó òåõíè÷åñêîé ïîääåðæêè ASUS.

1 Ñêà÷àéòå c ñàéòà ASUS è ðàçàðõèâèðóéòå ïðîøèâêó äëÿ WL-500gPV2
2 Óñòàíîâèòå óòèëèòû ñ äèñêà , èäóùåãî â êîìïëåêòå (ïîíàäîáèòñÿ óòèëèòà Firmware Restoration)
3 Íàñòðîéòå ñåòåâûå ïàðàìåòðû êîìïüþòåðà (â ñâîéñòâàõ TCP/IP) ñ IP àäðåñîì 192.168.1.2 ìàñêà 255.255.255.0
4 Ïîäêëþ÷èòå êîìïüþòåð ê ëþáîìó èç LAN ïîðòîâ ìàðøðóòèçàòîðà.
5 Âûêëþ÷èòå ïèòàíèå íà ìàðøðóòèçàòîðå, íàæìèòå êíîïêó Restore è óäåðæèâàÿ å¸ âêëþ÷èòå ïèòàíèå, êíîïêó óäåðæèâàéòå â òå÷åíèè 10-15ñåê , ïîêà èíäèêàòîð ïèòàíèÿ íå íà÷í¸ò ïîñòîÿííî ìèãàòü.
6 Çàïóñòèòå óòèëèòó Firmware Restoration , óêàæèòå ïóòü äî ïðîøèâêè è çàãðóçèòå å¸ â ìàðøðóòèçàòîðå.
7 Íà ýêðàíå äîëæíû îòîáðàæàòüñÿ ïðîöåññ çàãðóçêè ïðîøèâêè â ìàðøðóòèçàòîðå.
8 Ïîñëå çàãðóçêè ïðîøèâêè è ïåðåçàãðóçêè ìàðøðóòèçàòîðà ïîïðîáóéòå ââîéòè â ìåíþ ÷åðåç áðàóçåð http://192.168.1.1

Â èòîãå ïîìîãëî è ÿ ðåàíèìèðîâàë ñâîé ìàðøðóòèçàòîð

ÍÅÂÅÐÎßÒÍÎ!!!!!!!!

**Danya0w** · 28-07-2010, 21:42

ðåáÿòêè, ïðèøëîñü íàìåäíè âîññòàíîâèòü ôëåø-áýêàï ðîóòåðà ñ íàñòðîéêàìè, è òåïåðü âåáñåðâåð lighttpd âûäàåò çàìå÷àòåëüíóþ îøèáêó 500 - Internal Server Error.
êóäà ìîæíî êîïàòü?

**Parkinstein** · 29-07-2010, 07:49

Originally Posted by Danya0w

ðåáÿòêè, ïðèøëîñü íàìåäíè âîññòàíîâèòü ôëåø-áýêàï ðîóòåðà ñ íàñòðîéêàìè, è òåïåðü âåáñåðâåð lighttpd âûäàåò çàìå÷àòåëüíóþ îøèáêó 500 - Internal Server Error.
êóäà ìîæíî êîïàòü?

êîíôèã ëàéòà????

/opt/etc/lighttpd/lighttpd.conf

**Parkinstein** · 29-07-2010, 08:52

Ñåé÷àñ ãóëÿë ñ ñîáàêîé â ÿáëîíåâûõ ñàäàõ è ïîäóìàë.... ìëèí, êàê æå õîðîøî ÷åðâÿêó â ÿáëîêå... êðóãîì æðàòâà, òåíåê, âåòåðîê óêà÷èâàåò...
ïðàâäà åñòü ìèíóñû, ïîäóìàë ÿ, è ïîøåë åùå çà áàíêîé ïèâà...Êîãäà æå êîí÷èòñÿ âîñüìîé êðóã Äàíòå?...

**Danya0w** · 29-07-2010, 22:56

ðàíüøå òî ðàáîòàë îí.
ñòàðûé êîíô ïîäñòàâëÿë òîæå íå ðàáîòàåò

ëîã èç êîíñîëè ïðè îáðàùåíèè
â àòòà÷å êîíôèã ëàéòè

[_@Danya0w root]$ /opt/etc/init.d/S80lighttpd restart
Stopping web server: lighttpd
Starting web server: lighttpd
[_@Danya0w root]$ 2010-07-30 01:56:56: (log.c.75) server started

[_@Danya0w root]$ 2010-07-30 01:57:05: (mod_fastcgi.c.1731) connect failed: Connection refused on unix:/tmp/php-fcgi.sock-0
2010-07-30 01:57:05: (mod_fastcgi.c.2885) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1
2010-07-30 01:57:05: (mod_fastcgi.c.2658) child signaled: 11
2010-07-30 01:57:06: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 1687 socket: unix:/tmp/php-fcgi.sock-0
2010-07-30 01:57:06: (mod_fastcgi.c.3211) child signaled: 11
2010-07-30 01:57:06: (mod_fastcgi.c.3254) response not received, request sent: 835 on socket: unix:/tmp/php-fcgi.sock-0 for /index.php , closing connection
2010-07-30 02:13:53: (mod_fastcgi.c.1731) connect failed: Connection refused on unix:/tmp/php-fcgi.sock-0
2010-07-30 02:13:53: (mod_fastcgi.c.2885) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1
2010-07-30 02:13:53: (mod_fastcgi.c.2658) child signaled: 11
2010-07-30 02:13:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 1734 socket: unix:/tmp/php-fcgi.sock-0
2010-07-30 02:13:53: (mod_fastcgi.c.3211) child signaled: 11
2010-07-30 02:13:53: (mod_fastcgi.c.3254) response not received, request sent: 714 on socket: unix:/tmp/php-fcgi.sock-0 for /pub/serv.php , closing connection
2010-07-30 02:47:37: (mod_fastcgi.c.1731) connect failed: Connection refused on unix:/tmp/php-fcgi.sock-0
2010-07-30 02:47:37: (mod_fastcgi.c.2885) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1
2010-07-30 02:47:37: (mod_fastcgi.c.2658) child signaled: 11
2010-07-30 02:47:37: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 1737 socket: unix:/tmp/php-fcgi.sock-0
2010-07-30 02:47:37: (mod_fastcgi.c.3211) child signaled: 11
2010-07-30 02:47:37: (mod_fastcgi.c.3254) response not received, request sent: 584 on socket: unix:/tmp/php-fcgi.sock-0 for /pub/stream/index.php , closing connection

[odmin@Danya0w root]$

**Parkinstein** · 30-07-2010, 03:21

Originally Posted by Danya0w

ðàíüøå òî ðàáîòàë îí.
ñòàðûé êîíô ïîäñòàâëÿë òîæå íå ðàáîòàåò

ëîã èç êîíñîëè ïðè îáðàùåíèè
â àòòà÷å êîíôèã ëàéòè

ÿ ñ óòðà íå ñîâñåì õîðîøî ñîîáðàæàþ, äà.. íî ÷òî-òî ìíå ïîäñêàçûâàåò, ÷òî "mod_fastcgi" íàäî áû ðàñêîììåíòèðîâàòü...è êîïàòü â åãî ñòîðîíó... åñëè óæ ñîâñåì áåäà-áåäà-îãîð÷åíèå, òî --force-reinstal òóäûòü åãî â êà÷åëü....
ïðèëàãàþ ñâîé êîíôèã, ìîæ ïîäñóíóòü åìó?

**MrGalaxy** · 30-07-2010, 04:48

Ãîñïîäà, à ÷òî ñòàëî ñ
ipkg.nslu2-linux.org ?
Íå ìîãó îáíîâèòü ïàêåòû:

Code:

...
Location: http://ipkg.nslu2-linux.org/feeds-redirect.php?f=optware/oleg/cross/stable/transmission_2.03-1_mipsel.ipk [following]
--2010-07-30 07:44:25--  http://ipkg.nslu2-linux.org/feeds-redirect.php?f=optware/oleg/cross/stable/transmission_2.03-1_mipsel.ipk
Reusing existing connection to ipkg.nslu2-linux.org:80.
HTTP request sent, awaiting response... 302 Found
Location: http://ipkg2.nslu2-linux.org/feeds/optware/oleg/cross/stable/transmission_2.03-1_mipsel.ipk [following]
--2010-07-30 07:44:25--  http://ipkg2.nslu2-linux.org/feeds/optware/oleg/cross/stable/transmission_2.03-1_mipsel.ipk
Resolving ipkg2.nslu2-linux.org (ipkg2.nslu2-linux.org)... failed: Name or service not known.
wget: unable to resolve host address `ipkg2.nslu2-linux.org'
Nothing to be done
Successfully terminated.
Collected errors:
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/libpng_1.2.44-1_mipsel.ipk'
Failed to download libpng. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/mc_4.7.0.6-1_mipsel.ipk'
Failed to download mc. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/pcre_8.10-1_mipsel.ipk'
Failed to download pcre. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/php_5.2.14-1_mipsel.ipk'
Failed to download php. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/php-fcgi_5.2.14-1_mipsel.ipk'
Failed to download php-fcgi. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/php-gd_5.2.14-1_mipsel.ipk'
Failed to download php-gd. Perhaps you need to run 'ipkg update'?
ipkg_download: ERROR: Command failed with return value 4: `wget     -P /opt/ipkg-5mvsGQ http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/transmission_2.03-1_mipsel.ipk'
Failed to download transmission. Perhaps you need to run 'ipkg update'?
[admin@WL-001FC652FD2B root]$

**vectorm** · 30-07-2010, 10:11

Originally Posted by kamilnur

Â îáùåì íèêàê íå ìîãó çàñòàâèòü ðàáîòàòü îäíîâðåìåííî 3G ìîäåì íà áóêå è îäíîâðåìåííî âûõîäèòü â ëîêàëêó ÷åðåç Wi-Fi (WL-500W). Êàê ïðàâèëüíî ïðîïèñàòü ìàðøðóòû ÷òîáû îäíîâðåìåííî ðàáîòàë èíåò è ëîêàëêà ÷åðåç Wi-Fi? Ïðîáîâàë ïðîïèñàòü âîò òàêîé âîò ìàðøðóò:

Code:

route -p add 10.134.0.0 mask 255.255.0.0 172.20.0.1
route -p add 10.133.0.0 mask 255.255.0.0 172.20.0.1

, íî íè÷åãî íå ðàáîòàåò. Ïðîøó âàøåé ïîìîùè

Òåìà - îôòîïèê.
×èòàéòå ïðî íàñòðîéêó ìàðøðóòîâ â Âèíäå.
Ïî Âàøèì íàñòðîéêàì è íå äîëæíî ðàáîòàòü.
Ïåðååçæàåì âî Ôëóäèëüíþ.

**Danya0w** · 30-07-2010, 10:45

ó ìåíÿ ïîñëåäíåå âðåìÿ âîò òàêàÿ õåðíÿ íà÷àëà ïðîÿâëÿòüñÿ

Code:

[_@Danya0w root]$ ipkg install -force-reinstall fastcgi
Configuring ncurses
sed: -e expression #1, char 32: Memory exhausted
postinst script returned status 1
ERROR: ncurses.postinst returned 1
Nothing to be done
An error ocurred, return value: 4.
Collected errors:
Cannot find package fastcgi.
Check the spelling or perhaps run 'ipkg update'
[odmin@Danya0w root]$
[_@Danya0w root]$ ipkg remove ncurses
Nothing to be done
Successfully terminated.
Collected errors:
Package ncurses is depended upon by packages:
        lcd4linux
        lynx
        readline
        mc
        python24
These might cease to work if package ncurses is removed.

You can force removal of this package with -force-depends.
You can force removal of this package and its dependents
with -force-removal-of-dependent-packages or -recursive
or by setting option force_removal_of_dependent_packages
in ipkg.conf.
[_@Danya0w root]$ ipkg remove -recursive ncurses
Removing package lcd4linux from root...
Removing package lynx from root...
Removing package python24 from root...
Removing package readline from root...
Removing package mc from root...
Removing package python24 from root...
pkg_run_script: ERROR: uninstalled package python24 has a NULL tmp_unpack_dir
pkg_run_script: ERROR: uninstalled package python24 has a NULL tmp_unpack_dir
Removing package ncurses from root...
sed: -e expression #1, char 32: Memory exhausted
prerm script returned status 1
Successfully terminated.
[_@Danya0w root]$ ipkg remove -recursive ncurses
No packages removed.
Nothing to be done
Successfully terminated.
[_@Danya0w root]$ ipkg remove -force-removal-of-dependent-packages ncurses
No packages removed.
Nothing to be done
Successfully terminated.
[_@Danya0w root]$ ipkg install ncurses
Installing ncurses (5.7-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/ncurses_5.7-1_mipsel.ipk
Configuring ncurses
sed: -e expression #1, char 32: Memory exhausted
postinst script returned status 1
ERROR: ncurses.postinst returned 1
Successfully terminated.
[_@Danya0w root]$

**Parkinstein** · 30-07-2010, 12:36

Originally Posted by Danya0w

ó ìåíÿ ïîñëåäíåå âðåìÿ âîò òàêàÿ õåðíÿ íà÷àëà ïðîÿâëÿòüñÿ

Code:

[_@Danya0w root]$ ipkg install -force-reinstall fastcgi
Configuring ncurses
sed: -e expression #1, char 32: Memory exhausted
postinst script returned status 1
ERROR: ncurses.postinst returned 1
Nothing to be done
An error ocurred, return value: 4.
Collected errors:
Cannot find package fastcgi.
Check the spelling or perhaps run 'ipkg update'
[odmin@Danya0w root]$
[_@Danya0w root]$ ipkg remove ncurses
Nothing to be done
Successfully terminated.
Collected errors:
Package ncurses is depended upon by packages:
        lcd4linux
        lynx
        readline
        mc
        python24
These might cease to work if package ncurses is removed.

You can force removal of this package with -force-depends.
You can force removal of this package and its dependents
with -force-removal-of-dependent-packages or -recursive
or by setting option force_removal_of_dependent_packages
in ipkg.conf.
[_@Danya0w root]$ ipkg remove -recursive ncurses
Removing package lcd4linux from root...
Removing package lynx from root...
Removing package python24 from root...
Removing package readline from root...
Removing package mc from root...
Removing package python24 from root...
pkg_run_script: ERROR: uninstalled package python24 has a NULL tmp_unpack_dir
pkg_run_script: ERROR: uninstalled package python24 has a NULL tmp_unpack_dir
Removing package ncurses from root...
sed: -e expression #1, char 32: Memory exhausted
prerm script returned status 1
Successfully terminated.
[_@Danya0w root]$ ipkg remove -recursive ncurses
No packages removed.
Nothing to be done
Successfully terminated.
[_@Danya0w root]$ ipkg remove -force-removal-of-dependent-packages ncurses
No packages removed.
Nothing to be done
Successfully terminated.
[_@Danya0w root]$ ipkg install ncurses
Installing ncurses (5.7-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/ncurses_5.7-1_mipsel.ipk
Configuring ncurses
sed: -e expression #1, char 32: Memory exhausted
postinst script returned status 1
ERROR: ncurses.postinst returned 1
Successfully terminated.
[_@Danya0w root]$

ß áû ñèñòåìó ïåðåóñòàíîâèë óæå ))

**Danya0w** · 30-07-2010, 12:40

ìîæåò è õîðîøîÿ èäåÿ.
ó êîãî ìîæíî âðåìåííî çàõîñòèòüñÿ? =)

Thread: Ôàáðèêà-ôëóäèëüíÿ

Thread Tools

Rate This Thread

Display

Áåëîå ñîëíöå ñòîëèöû

Tags for this Thread

Posting Permissions