Page 3 of 10 FirstFirst 12345 ... LastLast
Results 31 to 45 of 137

Thread: Unslung/WL500g packages available for Oleg's firmware

  1. #31
    Join Date
    Apr 2004
    Location
    Adelaide, Australia
    Posts
    88
    Quote Originally Posted by barsju
    So how would I go about setting up a swapfile and the removing it again on a FAT drive?
    Hmmm - I don't think you can on FAT. You will need to partition the drive and make one partition a linux swap partition.

    -- Rod

  2. #32
    No, you can create a swap on fat, as a file. Just make and empty file with dd, then use mkswap and you can use it.

  3. #33
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Quote Originally Posted by barsju
    So how would I go about setting up a swapfile and the removing it again on a FAT drive? Does it matter that it is FAT? If it doesn't I guess I can find instructions on the forum..

    S.
    That's easy, first you need to create swap file and initalize it (this would create 64MB swap file):
    Code:
    dd if=/dev/zero of=/tmp/harddisk/linux.swp bs=1048576 count=64
    mkswap /tmp/harddisk/linux.swp
    And then activate it in the post-mount:
    Code:
    swapon /tmp/harddisk/linux.swp

  4. #34
    Join Date
    Jul 2004
    Location
    near Lyon @ France
    Posts
    195

    [04/26/2005] - updated package list

    Here is the current package list of the 135 availables wl500g packages built using the unslung build system.
    Again, thanks a lot to rwhitby, oleg and all the nslu2-linux staff.

    adns_1.1-1_mipsel.ipk
    appweb_1.2.3-5_mipsel.ipk
    atftp_0.7-5_mipsel.ipk
    audiofile_0.2.6-1_mipsel.ipk
    autoconf_2.59-2_mipsel.ipk
    automake_1.9.4-3_mipsel.ipk
    bash_2.05b-4_mipsel.ipk
    bc_1.06-1_mipsel.ipk
    bitchx_1.1-final-1_mipsel.ipk
    busybox-base_1.00-10_mipsel.ipk
    busybox-links_1.00-10_mipsel.ipk
    busybox_1.00-10_mipsel.ipk
    bzip2_1.0.2-3_mipsel.ipk
    ccxstream_1.0.15-3_mipsel.ipk
    chillispot_1.0RC3-1_mipsel.ipk
    classpath_0.13-3_mipsel.ipk
    coreutils_5.2.1-5_mipsel.ipk
    cpio_2.5-2_mipsel.ipk
    cron_4.1-4_mipsel.ipk
    ctags_5.5.4-1_mipsel.ipk
    cyrus-sasl-libs_2.1.20-6_mipsel.ipk
    cyrus-sasl_2.1.20-6_mipsel.ipk
    diffutils_2.8.1-3_mipsel.ipk
    distcc_2.18.3-2_mipsel.ipk
    dnsmasq_2.15-6_mipsel.ipk
    e2fsprogs_1.35-3_mipsel.ipk
    expat_1.95.8-1_mipsel.ipk
    fetchmail_6.2.5-5_mipsel.ipk
    file_4.12-2_mipsel.ipk
    findutils-doc_4.1.20-3_mipsel.ipk
    findutils_4.1.20-3_mipsel.ipk
    fixesext_2.0.1+cvs20050130-1_mipsel.ipk
    flex_2.5.4a-2_mipsel.ipk
    fontconfig_2.2.99-5_mipsel.ipk
    freeradius-doc_1.0.2-1_mipsel.ipk
    freeradius_1.0.2-1_mipsel.ipk
    freetype_2.1.9-1_mipsel.ipk
    ftpd-topfield_1.0-4_mipsel.ipk
    gconv-modules_2.2.5-4_mipsel.ipk
    gdb_6.3-2_mipsel.ipk
    gdbm_1.8.3-2_mipsel.ipk
    gift-ares_20050212-1_mipsel.ipk
    gift-fasttrack_0.8.9-1_mipsel.ipk
    gift-gnutella_0.0.10-1_mipsel.ipk
    gift-openft_0.2.1.5-1_mipsel.ipk
    gift_0.11.8.1-1_mipsel.ipk
    git_pasky-0.6.2-1_mipsel.ipk
    grep_2.4.2-4_mipsel.ipk
    gzip_1.2.4-2_mipsel.ipk
    hdparm_5.9-1_mipsel.ipk
    inetutils_1.4.2-4_mipsel.ipk
    joe_3.1-2_mipsel.ipk
    lame_3.96.1-3_mipsel.ipk
    less_381-2_mipsel.ipk
    libcurl_7.12.2-1_mipsel.ipk
    libdb_4.2.52-2_mipsel.ipk
    libevent_1.0b-1_mipsel.ipk
    libgd_2.0.33-2_mipsel.ipk
    libid3tag_0.15.1b-1_mipsel.ipk
    libjpeg_6b-2_mipsel.ipk
    libmad_0.15.1b-1_mipsel.ipk
    libogg_1.0-1_mipsel.ipk
    libol_0.3.15-2_mipsel.ipk
    libosip2_2.0.9-1_mipsel.ipk
    libpng_1.2.8-3_mipsel.ipk
    libtool_1.5.10-2_mipsel.ipk
    libusb_0.1.8-2_mipsel.ipk
    libvorbis_1.0-1_mipsel.ipk
    libxslt_1.1.12-2_mipsel.ipk
    logrotate_3.7-2_mipsel.ipk
    lua_5.0.2-1_mipsel.ipk
    lynx_2.8.5-3_mipsel.ipk
    lzo_1.08-2_mipsel.ipk
    m4_1.4.1-2_mipsel.ipk
    madplay_0.15.2b-1_mipsel.ipk
    make_3.80-2_mipsel.ipk
    man-pages_2.01-2_mipsel.ipk
    man_1.5p-3_mipsel.ipk
    mc_4.1.35-2_mipsel.ipk
    miau_0.5.3-9_mipsel.ipk
    microperl_5.8.6-3_mipsel.ipk
    minicom_2.1-1_mipsel.ipk
    mktemp_1.5-1_mipsel.ipk
    mt-daapd_0.2.1.1-3_mipsel.ipk
    nano_1.2.4-2_mipsel.ipk
    ncftp_3.1.8-2_mipsel.ipk
    ncurses_5.4-3_mipsel.ipk
    ntpclient_2003_194-3_mipsel.ipk
    nylon_1.2-3_mipsel.ipk
    openssl_0.9.7d-3_mipsel.ipk
    openvpn_2.0_rc17-1_mipsel.ipk
    patch_2.5.4-3_mipsel.ipk
    php-dev_5.0.3-7_mipsel.ipk
    php-gd_5.0.3-7_mipsel.ipk
    php-mysql_5.0.3-7_mipsel.ipk
    php-thttpd_2.25b-5.0.3-4_mipsel.ipk
    php_5.0.3-7_mipsel.ipk
    pkgconfig_0.15.0-1_mipsel.ipk
    popt_1.7-1_mipsel.ipk
    portmap_4-3_mipsel.ipk
    procps_3.2.3-4_mipsel.ipk
    proftpd_1.2.10-5_mipsel.ipk
    puppy_1.8-2_mipsel.ipk
    rdate_1.4-2_mipsel.ipk
    readline_5.0-1_mipsel.ipk
    recordext_1.13+cvs20050130-1_mipsel.ipk
    renderext_0.8+cvs20050130-1_mipsel.ipk
    rsync_2.6.3-7_mipsel.ipk
    siproxd_0.5.10-1_mipsel.ipk
    sqlite_3.2.1-1_mipsel.ipk
    strace_4.5.8-1_mipsel.ipk
    stunnel_4.07-7_mipsel.ipk
    syslog-ng_1.6.6-2_mipsel.ipk
    tar_1.14-3_mipsel.ipk
    tcpdump_3.8.3-1_mipsel.ipk
    tcpwrappers_7.6-2_mipsel.ipk
    termcap_1.3.1-2_mipsel.ipk
    textutils_2.1-1_mipsel.ipk
    thttpd_2.25b-1_mipsel.ipk
    unfs3_0.9.10-1_mipsel.ipk
    units_1.80-2_mipsel.ipk
    vorbis-tools_1.0.1-1_mipsel.ipk
    vsftpd_2.0.1-7_mipsel.ipk
    w3cam_0.7.2-1_mipsel.ipk
    wakelan_1.1-2_mipsel.ipk
    wget-ssl_1.9.1-2_mipsel.ipk
    which_2.16-2_mipsel.ipk
    xau_0.1.1+cvs20050130-1_mipsel.ipk
    xdmcp_0.1.3+cvs20050130-1_mipsel.ipk
    xextensions_1.0.2-1_mipsel.ipk
    xinetd_2.3.13-4_mipsel.ipk
    xproto_6.6.2+cvs20050130-1_mipsel.ipk
    xtrans_0.1+cvs20050130-1_mipsel.ipk
    xvid_20050214-2_mipsel.ipk
    zlib_1.2.2-2_mipsel.ipk

  5. #35
    Join Date
    Apr 2004
    Location
    Adelaide, Australia
    Posts
    88
    Quote Originally Posted by Jean-Fabrice
    Here is the current package list of the 135 availables wl500g packages built using the unslung build system.
    Again, thanks a lot to rwhitby, oleg and all the nslu2-linux staff.
    And a big thanks to Jean-Fabrice for taking on the job of Unslung/WL500g packages release manager, and performing it so well. It is good to see Jean-Fabrice and Josh (our Unslung/NSLU2 packages release manager) working together to keep a single source for both WL500g and NSLU2 packages, and to drive both sets of packages forward!

    -- Rod

  6. #36
    Can I draw attention to:
    this comment from barsju:

    Join Date: Nov 2004
    Posts: 141
    Hmm. I try to install ncurses but my router reboots. I'm guessing I run out of memory. I have a USB stick, but don't boot from it. I have installed ipkg using the loop-filesystem trick (a file on my FAT usb stick).

    My question is should I have:
    dest root /
    in my ipkg.conf? Does this mean that I try to download to root, and that is why I run out of memory? Should it be /tmp/harddisk/ or /opt/ ? Or is ncurses just to big for me to install, so that I need to boot from USB to make it work?

    S.

    I need to know whether dest root needs to be changed too

  7. #37
    No dest root is fine. Once I setup a swap file, it installed fine. Once finished installing I switched off the swap file.

    S.

  8. #38
    Quote Originally Posted by jago25_98
    Can I draw attention to:
    this comment from barsju:

    Join Date: Nov 2004
    Posts: 141
    Hmm. I try to install ncurses but my router reboots. I'm guessing I run out of memory. I have a USB stick, but don't boot from it. I have installed ipkg using the loop-filesystem trick (a file on my FAT usb stick).

    My question is should I have:
    dest root /
    in my ipkg.conf? Does this mean that I try to download to root, and that is why I run out of memory? Should it be /tmp/harddisk/ or /opt/ ? Or is ncurses just to big for me to install, so that I need to boot from USB to make it work?

    S.

    I need to know whether dest root needs to be changed too
    No, / is the base for al packages. Root just gives the base for where to install packages
    You may have to add some swap in order to be able to install larger packages. Details on how to do that have been given in other threats
    like http://wl500g.info/showthread.php?t=...ghlight=swapon or do a search for swapon
    /Louis

  9. #39
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353

    ipkg updated

    I've updated ipkg to 0.99.149. rc.unslung, ipkg.conf are included. Use
    Code:
    ipkg update
    ipkg upgrade ipkg
    to update to latest.

  10. #40

    Problem after installation of ipkg 0.99.149

    Hello Oleg,

    Installation of the new version ended successfully, but now if I try to update:

    "ipkg update" returns following:

    ipkg: Cannot create directory `//usr/lib/ipkg': Read-only file system
    ipkg: Cannot create directory `/usr/lib/ipkg': Read-only file system
    ipkg: Cannot create directory `//usr/lib/ipkg': Read-only file system
    ipkg: Cannot create directory `/usr/lib/ipkg': Read-only file system
    An error ocurred, return value: 22.
    Collected errors:
    ipkg_update_cmd: ERROR: failed to make directory /usr/lib/ipkg/lists: Read-only file system


    Is this new version not compatible (path) with the earlier version installed with the how-to of macsat?

  11. #41
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    will check on this... seems to be a bug...

  12. #42
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Ok, fixed this. If anyone if already installed bad ipkg (i.e. it fails to work), then just type these lines
    Code:
    cd /opt/bin
    wget http://wl500g.dyndns.org/ipkg/ipkg
    This would download correct version and fix the things.

  13. #43
    All things are OK now !
    Thank you for your quick reaction.

  14. #44
    Join Date
    Aug 2005
    Location
    Eindhoven, The Netherlands
    Posts
    125
    Just curious:

    What good is php-mysql_5.0.3-7_mipsel.ipk when there is no MySQL support present?

  15. #45
    I guess it can be used to connect to a remote MySQL server, if you have access to one that allows external connections ?
    macsat
    http://www.macsat.com - Tutorials and information on using ASUS WL-500G and family.

Page 3 of 10 FirstFirst 12345 ... LastLast

Similar Threads

  1. Contributors needed for wl500g packages
    By Jean-Fabrice in forum WL-500g Custom Development
    Replies: 33
    Last Post: 13-07-2009, 23:20
  2. oleg's firmware vs openwrt
    By sophana in forum WL-500g Custom Development
    Replies: 5
    Last Post: 15-07-2005, 18:46
  3. Webtools - Configure installed Unslung and other packages
    By Styno in forum WL-500g Custom Development
    Replies: 22
    Last Post: 20-04-2005, 08:46
  4. FTP Connect with Oleg's Firmware?
    By stefan9113 in forum WL-HDD Custom Development
    Replies: 4
    Last Post: 27-02-2005, 01:01

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •