wl500gp v2
hi, I have a problem with my wl500gp v2. I am successfully connected to the router via serial port, but I dont know how to rescue nvram. My question is, how upload firmware via serial port. I use nokia cable dku-5. I add to the supplication of the putty log. I do not know what to do. my English is not very good. Please help, thanks a lot.
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.06.27 00:27:29 =~=~=~=~=~=~=~=~=~=~=~=
Connection dropped...
Attempting connect...
Decompressing..........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jan 28 10:52:32 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80400000 - 0x80497FF0 (622576)
Initialized Data: 0x8042F370 - 0x80431830 (9408)
BSS Area: 0x80431830 - 0x80431FF0 (1984)
Local Heap: 0x80431FF0 - 0x80495FF0 (409600)
Stack Area: 0x80495FF0 - 0x80497FF0 (8192)
Text (code) segment: 0x80400000 - 0x8042F370 (193392)
Boot area (physical): 0x00498000 - 0x004D8000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr BC-AE-C5-C4-29-9F, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3740 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029029
Linux version 2.4.35 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #2097 Sat May 24 14:47:53 CEST 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
Broadcom Watchdog Timer: 0.05, timer margin: 30 sec
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Flash device: 0x800000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x4dad0a
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_IPV4OPTSSTRIP loaded
VFS: Mounted root (squashfs filesystem) readonly.
Booting device: Linksys WRT54G/GL/GS
boardflags are 0x0750
sh: cannot create /proc/switch/eth1/reset: nonexistent directory
Unlocking ddwrt ...
set port 0 to AUTO
set port 1 to AUTO
set port 2 to AUTO
set port 3 to AUTO
set port 4 to AUTO
register_vlan_device: ALREADY had VLAN registered
vconfig: ioctl error for add: Invalid argument
ifconfig: SIOCSIFADDR: No such device
register_vlan_device: ALREADY had VLAN registered
vconfig: ioctl error for add: Invalid argument
ifconfig: SIOCSIFADDR: No such device
set port 5 to AUTO
eth1: Operation not supported
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
br0: Bad file descriptor
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
br0: Bad file descriptor
eth1: Operation not supported
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
device eth1 entered promiscuous mode
device wl0.1 entered promiscuous mode
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
Key is a RSA key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
Key is a DSS key
Wrote key to '/tmp/root/.ssh/ssh_host_dss_key'
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to bc ae c5 c4 29 a0.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: No such process
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
sh: /tmp/.rc_startup: not found
/tmp/smbshare
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
n
DD-WRT v24 mega (c) 2008 NewMedia-NET GmbH
Release: 05/24/08 (SVN revision: 9526)
˙
Etasix login: Launching VPN process
Process launched
Waiting.......
Decompressing..........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jan 28 10:52:32 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80400000 - 0x80497FF0 (622576)
Initialized Data: 0x8042F370 - 0x80431830 (9408)
BSS Area: 0x80431830 - 0x80431FF0 (1984)
Local Heap: 0x80431FF0 - 0x80495FF0 (409600)
Stack Area: 0x80495FF0 - 0x80497FF0 (8192)
Text (code) segment: 0x80400000 - 0x8042F370 (193392)
Boot area (physical): 0x00498000 - 0x004D8000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr BC-AE-C5-C4-29-9F, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Hello!! Enter Rescue Mode: (by Force)
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured
Reading :: TFTP Server.
Decompressing..........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jan 28 10:52:32 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80400000 - 0x80497FF0 (622576)
Initialized Data: 0x8042F370 - 0x80431830 (9408)
BSS Area: 0x80431830 - 0x80431FF0 (1984)
Local Heap: 0x80431FF0 - 0x80495FF0 (409600)
Stack Area: 0x80495FF0 - 0x80497FF0 (8192)
Text (code) segment: 0x80400000 - 0x8042F370 (193392)
Boot area (physical): 0x00498000 - 0x004D8000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr BC-AE-C5-C4-29-9F, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Hello!! Enter Rescue Mode: (by Force)
Failed.: Timeout occured
Reading :: TFTP Server.
Failed.: Timeout occured