Firmware WL500g-1.9.2.7-3c-CDMA-1.55

[joshi]

I find another firmware release ,working great.
http://koppel.cz/cdmawifi


http://koppel.cz/cdmawifi/download/1...-CDMA-1.55.trx

SNMPd is in it.

[britnet]

In the new version the firmware supports up to 32 bandwith rules.

http://koppel.cz/cdmawifi/download/History

Probably this Forum an the czech Forum could work together.

But pleeeaaase in English!!

[engy]

Yes.
It's our modification of Oleg's firmware to support USB GTRAN modem for CDMA EV-DO which runs on 450MHz. This wireless technology is only in Czech republic.

[mr0mega]

Wow, it looks like it may help my networking problem, does the VPN allow me access to a usb disk in the router?

Also, is the interface in English?

[engy]

No. It's only in czech because CDMA is only in czech. USB disk is accessible via FTP.

[petgun]

No. It's only in czech...

..that is a political reason..not technical?

[engy]

Yes. When CDMA and our firmware modification will by widely used, it will by also in english.

[taufer]

Here is the link to source code for this version

http://koppel.cz/cdmawifi/download/1...MA-1.55.tar.gz

[rexster]

is the firmware interface in english?
if not, any english version?

will Oleg's fw ever support gprs/cdma modem?

i think it'll be great to put gprs/cdma modem support into fw.

my plan is to plug my gprs/cdma modem into wl500g/x and put it on my car with a modified power supply.
so i'd got a truely mobile hotspot. anywhere you see my car you can use the hotspot...

[herrisom]

Unfortunaelly the .cz firmware for wl-500gx contains a ppp not compiled with support for active-filter.

I guess even using iptable I still not able to stop internet since idle time is never reached due to misc incoming packages.

Could it be possible to include ppp filtering in a new firmware or provide a ppp package with support for acrive-filter (I'm interested in outbound keyword).

Please help me or provide me an alternative to be able to ignore incoming packets when dial on demand is used with pppd.

Thanks a lot

[cfree]

So has a CDMA package been developed for Oleg's software?

Can't really try Oleg's as I'm CDMA dependant for the internet.

tanx

[Asmadei]

in this firmware exist property " use my dialup file"
There are i can get this files, and read about this?
And what is structures of this files?

[skier]

Hi Everyone,

I was visiting http://koppel.cz/cdmawifi/download/1...f-USB-1.64.trx,
and found out that they have a new soft for WL500g. This soft allows to plug 2 CDMA modem and have internet VIA WIFI. There are 2 models that are supported by this software. AnydataADU-E100H and one more model. I use C-Montech CNU-550. Can anybody help to modify the 1.9.2.7-7f-USB-1.64.trx in a such way that my modem will work.
WL500GX recognizes the modem very well. Here is the log
System Log from My Asus WL500gx, after inserting the CNU-550. C-Montech

Apr 19 17:51:43 kernel: usb.c: USB disconnect on device 01:02.2-2 address 2
Apr 19 17:51:44 nmbd[136]: [2007/04/19 17:51:44, 0] nmbd/nmbd.c:sig_term(65)
Apr 19 17:51:44 nmbd[136]: Got SIGTERM: going down...
Apr 19 17:51:45 USB storage: removed
Apr 19 17:51:45 kernel: Device 08:05 not ready.
Apr 19 17:51:45 kernel: I/O error: dev 08:05, sector 1
Apr 19 17:51:57 kernel: hub.c: new USB device 01:02.0-2, assigned address 2
Apr 19 17:51:57 kernel: Manufacturer: CMOTECH CO., LTD.
Apr 19 17:51:57 kernel: Product: CMOTECH CDMA Technologies
Apr 19 17:51:58 kernel: SerialNumber: Serial Number
Apr 19 17:51:58 kernel: usb.c: USB device 2 (vend/prod 0x16d8/0x5543) is not claimed by any active driver.
Apr 19 17:51:58 kernel: Length = 18
Apr 19 17:51:58 kernel: DescriptorType = 01
Apr 19 17:51:58 kernel: USB version = 2.00
Apr 19 17:51:58 kernel: Vendor:Product = 16d8:5543
Apr 19 17:51:58 kernel: MaxPacketSize0 = 16
Apr 19 17:51:58 kernel: NumConfigurations = 1
Apr 19 17:51:58 kernel: Device version = 0.00
Apr 19 17:51:58 kernel: Device Class:SubClass:Protocol = 02:00:00
Apr 19 17:51:58 kernel: Communications class
Apr 19 17:51:58 kernel: Configuration:
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 02
Apr 19 17:51:58 kernel: wTotalLength = 005a
Apr 19 17:51:58 kernel: bNumInterfaces = 03
Apr 19 17:51:58 kernel: bConfigurationValue = 01
Apr 19 17:51:58 kernel: iConfiguration = 00
Apr 19 17:51:58 kernel: bmAttributes = 80
Apr 19 17:51:58 kernel: MaxPower = 100mA
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 0
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 00
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 01
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = 02:02:01
Apr 19 17:51:58 kernel: iInterface = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 81 (in)
Apr 19 17:51:58 kernel: bmAttributes = 03 (Interrupt)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0010
Apr 19 17:51:58 kernel: bInterval = 20
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 1
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 01
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 02
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = 0a:00:00
Apr 19 17:51:58 kernel: iInterface = 04
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 8a (in)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 0b (out)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 2
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 02
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 02
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = ff:ff:ff
Apr 19 17:51:58 kernel: iInterface = 04
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 82 (in)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 05 (out)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00

I think I need to use this script.

921600

connect '/usr/sbin/chat -s -v "" "AT&F0E0V1S0=0" OK ATD#777 CONNECT'

debug

updetach

crtscts

noipdefault

nodetach

novj

lcp-echo-failure 0

nobsdcomp

novjccomp

nopcomp

noaccomp

noauth

user mobile

modem

usepeerdns

defaultroute

connect-delay 5000


Thanks in Advance.

[alien433]

I think you better ask the person who wrote this firmware. He speaks very good english.

[skier]

Hi Alien433'

Are you from from Czech republic? That script was written by very smart guy from Czech republic. But I cannot speak czech and cannot find any information on that forum. If you can help to readdress my question?

Thanks in Advance.
Skier